What is the standard tire pressure for the Fista?

Will the relay still conduct electricity if it's broken?

If the relay coil is broken or the contacts cannot touch, it will not conduct electricity. If the relay is short-circuited, it will still conduct electricity and remain continuously powered. The static contact that remains open when the relay coil is not energized is called a "normally open contact"; the static contact that remains closed is called a "normally closed contact". Below is an introduction to relays: A relay (Relay), also known as an electric relay, is an electronic control device. It consists of a control system (also called the input circuit) and a controlled system (also called the output circuit). Relays are generally used in automatic control circuit systems. Essentially, a relay is an "automatic switch" that uses a smaller current to control a larger current. In circuits, relays play roles such as automatic regulation, safety protection, and circuit switching.

7

5

Share

What is the front vehicle assist alert in Lavida Plus?

Lavida Plus's front assist system is also known as the pre-collision safety system. Here are the specific details of the front vehicle assist alert in Lavida Plus: Identifying potential accidents: It can monitor the distance to the vehicle ahead in real-time. If the distance exceeds the safe range and a potential collision is detected, it will issue a warning to prompt the driver to take necessary action. Mitigating accident consequences: If the driver fails to respond, the system will automatically apply the brakes. In the event of a collision, it can effectively reduce the severity of the accident. Functions of Lavida Plus's front assist system: Monitoring function: Real-time monitoring of the distance to the vehicle ahead via a radar sensor installed in the front radiator grille. Warning function: In emergency situations, it preconditions the brakes and alerts the driver through optical and acoustic warnings as well as brake vibrations to prompt appropriate action. Automatic deceleration function: If the driver's braking response is insufficient, the front assist system will generate the necessary braking pressure to avoid a collision. If the driver does not brake at all, the system will automatically decelerate the vehicle. Automatic emergency braking function: If the driver does not respond to these warnings, targeted braking will be automatically activated.

8

3

Share

What are the length, width, and height of the Toyota Highlander?

The body dimensions of the Highlander are: 4795mm/1910mm/1730mm (length/width/height). Below is relevant information about the Highlander's engine: 1. In terms of power, the domestically produced new Highlander is equipped with a 2.0T and a 3.5L V6 engine, with maximum power outputs of 220 horsepower and 273 horsepower respectively, and maximum torques of 350N·m and 337N·m respectively. For the transmission, the 2.0T model still uses a 6AT transmission, while the 3.5L model is likely to adopt Toyota's latest 8AT transmission. 2. Engine oil level check: Park the vehicle on a level surface. Pull out the dipstick to check the oil level. If the oil level is between the (F) and (L) marks, it is within the normal range. If it is below the (L) mark, add the specified type of engine oil. The oil level after adding should not exceed the (F) mark.

17

5

Share

When can C1 be upgraded to B2?

To upgrade from a C1 driver's license to a B2, you must have held the C1 license for at least one year and meet the following conditions: Be between 20 and 60 years of age; Have a height of at least 155cm; No record of accumulating 12 penalty points in the current scoring cycle or the most recent scoring cycle before application; Visual acuity must reach 5.0 or above on the logarithmic visual acuity chart; No record of drunk driving or being primarily responsible for a traffic accident causing casualties while holding a C1 driver's license. Specific process for applying for a B2 driver's license: Apply to the vehicle management office to add the B2 license to your permitted vehicle types; Fill out the application form, submit your ID card and physical examination form, and provide the original copy of your current motor vehicle driver's license; Attend the theoretical and practical exams as scheduled; After passing the exams, the new-level driver's license will be issued by the applying vehicle management office within 7 working days.

19

3

Share

Fuel consumption of Qin Plus DMI?

The model equipped with DM-i super hybrid technology has a comprehensive fuel consumption of only 3.8L/100KM when running on battery depletion. Introduction to BYD Qin Plus: 1. Body dimensions: Length, width, and height are 4765mm, 1837mm, and 1495mm respectively, with a wheelbase of 2718mm. 2. Powertrain: It is equipped with a 1.5-liter naturally aspirated engine, which has a maximum power of 81kw, reaching its peak power at 6000 rpm, and a maximum torque of 135 Nm, peaking at 4500 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 3. Suspension: The front suspension uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension. The MacPherson suspension is a relatively simple independent suspension structure with only one L-shaped control arm.

12

4

Share

How to Change a Spare Tire?

Here are the steps to change a spare tire: 1. Use the lug wrench from the car toolkit to slightly loosen the tire bolts; otherwise, you won't be able to loosen them after lifting the car. 2. Use the jack to lift the side with the flat tire. You can jack up the hard area along the edge of the car's underbody—there is usually a designated spot for jacking, which is easy to identify. Lift until the tire is off the ground. 3. Use the wrench to remove the tire bolts and take off the tire. Some tires may stick to the wheel hub, making them tight. You can kick the edge of the tire a couple of times to loosen it before removing it. 4. Take out the spare tire, align it with the bolt holes, and install it. Make sure the holes are properly aligned; otherwise, the bolts won't fit. Then, hand-tighten all the bolts and use the wrench to tighten them slightly. 5. Lower the jack and use the wrench to fully tighten the tire bolts. Apply the same force as when loosening them to ensure all bolts are securely tightened.

4

0

Share

What is the standard tire pressure for the Fista?

Will the relay still conduct electricity if it's broken?

What is the front vehicle assist alert in Lavida Plus?

What are the length, width, and height of the Toyota Highlander?

When can C1 be upgraded to B2?

Fuel consumption of Qin Plus DMI?

How to Change a Spare Tire?

What are the differences between the 2015 and 2016 Passat models?

How to Deal with a Locked Steering Wheel in a Volkswagen?

Is it necessary to use Honda fuel additive for Civic?

What brand is the original audio system in the Audi S4?