What is the standard tire pressure for the Edge?

2 Answers
BlakelyFitz
07/29/25 5:02am
The standard tire pressure for the Ford Edge is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. To check the tire pressure on the Ford Edge: First, enter the main menu of the vehicle's computer, select "Driver Assist," then click on "Tire Pressure Monitoring" to view the tire pressure. The Edge is equipped with a tire pressure monitoring system. When it detects one or more tires significantly underinflated, a warning light will illuminate. If the low tire pressure warning light comes on, you should stop and check the tires as soon as possible and inflate them to the correct pressure. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no stamp on top and four small spikes at the bottom, containing an exclamation mark), there are generally three possible reasons: 1. Abnormal tire pressure. Typically, the system will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. 2. The tire pressure monitoring system has not been reset. After inflating the tires, if the tire pressure reset is not performed promptly, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply perform a tire pressure reset to resolve this. 3. The tire pressure sensor is damaged. The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving (e.g., by hitting a curb), it can also trigger the tire pressure warning light. For sensor damage issues, the only solution is to replace the sensor with a new one.
Was this review help?
10
0
Share
McAriel
08/12/25 8:40am
The standard tire pressure for the Edge is generally around 32 psi for the front tires and 32 psi for the rear tires, but this can vary depending on your model year and configuration. This information is usually indicated in the owner's manual or on the sticker on the driver's door frame. I personally enjoy checking it myself and recommend doing so every two weeks or when refueling. Use a tire pressure gauge to measure from cold tires to ensure accurate readings. Remember, too high tire pressure increases bumpiness, while too low pressure wastes fuel and increases the risk of a blowout. Always check before long trips. Many gas stations now offer free air pumps, making it convenient to adjust as needed. Paying attention to these details will keep your car running smoothly.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

What are the length, width, and height of the Fengxing CM7?

The length, width, and height of the Fengxing CM7 are: 5150mm, 1920mm, and 1925mm. Taking the 2018 Fengxing CM7 as an example, it is an MPV with a wheelbase of 3198mm, a fuel tank capacity of 80 liters, and a body weight of 2120kg. The 2018 Fengxing CM7 features a MacPherson independent front suspension and a five-link spiral spring non-independent rear suspension. It adopts a front-engine, rear-wheel-drive layout and is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190 PS, a maximum torque of 250 Nm, and a maximum power of 140 kW. It is paired with a 6-speed automatic transmission.
6
0
Share

Is Bugatti Owned by Volkswagen?

Bugatti is owned by Volkswagen. The models under Bugatti include: Bugatti Veyron, Bugatti Divo, Bugatti Chiron, Bugatti Galibier, Bugatti Atlantic, etc. Taking the 2008 Bugatti Veyron as an example, it is a sports car with the following dimensions: length 4462mm, width 1998mm, height 1204mm, wheelbase 2701mm, and a fuel tank capacity of 100l. The 2008 Bugatti Veyron is equipped with an 8.0T turbocharged engine, delivering a maximum horsepower of 1001PS, a maximum torque of 1250Nm, and a maximum power of 736kW.
4
0
Share

What are the solutions for a car that won't start?

Solutions for a car that won't start include: 1. Replenish the battery power in time; 2. Check the working condition of the ignition system; 3. Clean the carbon deposits in the engine; 4. Replace with high-quality fuel; 5. Inspect for faults in the water pump, air conditioning compressor, clutch, and generator; 6. Replace spark plugs promptly; 7. Perform periodic cleaning of the valves. The reasons why a car won't start are: 1. Insufficient battery power; 2. Blocked gasoline flow; 3. Poor working condition of the ignition system; 4. Valve sticking or carbon deposits; 5. Poor atomization of the air-fuel mixture inside the engine; 6. Engine carbon deposits; 7. Poor fuel quality.
4
1
Share

Where is the Tiguan's cabin air filter located?

The Tiguan's cabin air filter is located beneath the glove compartment on the passenger side. Simply remove the glove compartment to access it. Taking the 2017 Automatic Silk Road Trend Edition Tiguan as an example, it belongs to the compact SUV category with the following dimensions: length 4506mm, width 1809mm, height 1685mm, wheelbase 2684mm, fuel tank capacity 63l, and curb weight 1545kg. The 2017 Automatic Silk Road Trend Edition Tiguan features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.8T turbocharged engine delivering a maximum horsepower of 160PS, peak power of 118kW, and maximum torque of 250Nm, paired with a 6-speed automatic transmission.
10
3
Share

What is the operation method for starting and moving off with the Hongqi HS5?

The operation method for starting and moving off with the Hongqi HS5 is as follows: 1. Press the start button while keeping your right foot on the brake pedal; 2. Move the gear selector to the D (Drive) position for forward movement; 3. Release the parking brake lever; 4. Gradually release the brake pedal; 5. Move your right foot to the accelerator pedal and gently press it to move forward. Taking the 2019 Hongqi HS5 as an example, it is a mid-size SUV with the following dimensions: length 4760mm, width 1907mm, height 1700mm, wheelbase 2870mm, fuel tank capacity 64 liters, and curb weight 1755kg.
14
2
Share

What are the reasons for the handbrake light to illuminate?

The reasons for the handbrake light to illuminate are: 1. The handbrake is not fully released; 2. Insufficient brake fluid; 3. Worn brake pads or foreign objects lodged in the brake pads. The consequences of driving with the handbrake engaged are: 1. Accelerated wear of the brake disc and hardening of the brake pads due to overheating, leading to reduced braking performance; 2. Excessive wear of the handbrake's brake pads, potentially causing damage to the drive shaft; 3. Locking of the rear wheels, which may result in the handbrake cable snapping, leading to skidding or even a rollover. The function of the handbrake is to provide braking when parking on flat or inclined surfaces, preventing the vehicle from moving unintentionally when unattended. Its principle involves using a steel cable connected to the rear brake shoes to apply braking force to the vehicle.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.