What is the standard tire pressure for SUV vehicles?

What Causes the Brake Noise in a New Sagitar?

Reasons for brake noise in Volkswagen Sagitar: 1. If it's a sharp screeching sound, first check if the brake pads are nearly worn out (the warning indicator is making noise). If the pads are new, inspect for any foreign objects caught between the brake disc and pads. 2. If it's a dull sound, it's mostly an issue with the brake caliper, such as worn sliding pins or detached spring plates. 3. If it's a hissing sound, the problem could be more complex, involving the caliper, brake disc, or brake pads. 4. If the noise is continuous, first check for dragging brakes. Poor caliper retraction can cause prolonged friction between the disc and pads, leading to noise under certain conditions. Also, inspect for any foreign objects stuck between the pads and disc. If the pads are new, check if the brake disc has grooves, as localized friction can cause noise. If the disc is fine, consider whether the brake pads are too hard or if the noise-dampening shims are incorrectly installed.

5

0

Share

What is the difference between a U-turn and a turn?

The difference between a U-turn and a turn is that a U-turn requires the vehicle to rotate 180 degrees, while a turn only requires a 90-degree rotation. Below are the relevant introductions for vehicle U-turns and turns: 1. U-turn precautions: When performing a U-turn, the vehicle should ensure not to cross the stop line of the left-turn lane at the intersection. Avoid occupying or pressing on traffic markings such as solid lane dividers, pedestrian crossings, guide lines, and safety islands. Do not obstruct the normal passage of other vehicles and pedestrians. 2. Turn precautions: When turning, the vehicle speed should be slow, and the steering wheel should not be turned too sharply to prevent excessive centrifugal force causing the vehicle to skid. If the vehicle skids, immediately release the accelerator pedal and turn the steering wheel toward the side of the skidding rear wheel. Once the vehicle resumes straight driving, straighten the steering wheel and continue driving.

13

0

Share

Can the Wuling Hongguang Mini be charged when the battery is not fully depleted?

Wuling Hongguang Mini can be charged when the battery is not fully depleted. Below is some relevant information about the Wuling Hongguang Mini: 1. Introduction: The Hongguang MINIEV is the first four-seat new energy vehicle under the Wuling brand of SAIC-GM-Wuling, positioned as a people's commuter car. The Hongguang MINIEV is a product that comprehensively meets the diverse needs of users for commuting and travel, providing a new option for those who value practicality, safety, and economical convenience. 2. Exterior Design: The Hongguang MINIEV features a two-door design, creating a cute visual effect with vertical front and rear styling. The front face of the Hongguang MINIEV adopts a narrow grille, paired with a through-type air intake below and large headlight clusters on both sides, giving it a high level of recognition.

15

1

Share

What is the fuel consumption of the Pajero V93?

The official fuel consumption of the Mitsubishi Pajero as per the Ministry of Industry and Information Technology is 12.4L/100km. Here are the relevant details: 1. In actual driving conditions, road conditions and engine operating conditions are very complex, so the official fuel consumption will be lower than the real average fuel consumption of car owners. 2. The engine of the Mitsubishi Pajero is derived from the 6G71 engine by enlarging the cylinder, so its stroke is as short as that of the 6G71 engine, only 76mm. Although it is a 6-cylinder engine, to obtain greater power output, it is necessary to increase the engine speed, and higher RPM is required to gain torque and power, which is not ideal for off-road vehicles. 3. Fortunately, Mitsubishi has made a series of modifications to the later Pajero models, reducing the compression ratio, which greatly improved the overall durability of the engine, and optimized the torque curve, allowing for a larger torque of 225Nm at 2000-5600rpm.

14

0

Share

What Are the Reasons for Poor Cooling Effect of Car Air Conditioning?

Here are the reasons for the poor cooling effect of car air conditioning: 1. Clogged air filter: A clogged air filter results in reduced airflow. Although the air is cool enough, insufficient airflow makes it feel like the cooling is inadequate. Replacing the air filter can solve this issue. 2. Excessive dust in the evaporator box: It is generally recommended to replace the air filter twice a year—once in winter and once in summer. The air conditioning system should be cleaned once every one or two years, depending on usage frequency, preferably in summer. There is no need to clean the heating system in winter. 3. Dirty condenser: The condenser, located in front of the radiator, is used to dissipate heat from the refrigerant. It can often get clogged with debris such as lint, leading to poor heat dissipation and reduced cooling performance. 4. Insufficient refrigerant: If the refrigerant level in the air conditioning system is low, the pressure decreases, reducing the amount of heat removed and resulting in inadequate cooling. 5. Faulty components in the air conditioning system: Damaged compressor, expansion valve, etc., require inspection and repair at a 4S shop.

1

4

Share

What to Do When BMW RDC Tire Pressure Monitoring Fails?

The sensor or module may be malfunctioning, it is recommended to have it checked at a 4S shop; If the sensor or module is not malfunctioning and the program has not been flashed, then resetting it should be fine; Reset before going out, the car needs to be driven for a while, it will automatically check. BMW's tire pressure monitoring system RDC consists of a DSC module with RDC control function and 4 wheel sensors. In many European and American countries, it is a legal requirement for vehicles to be equipped with this system. When the vehicle speed reaches 20-30km/h, the RDC starts working, with the wheel sensors having a test cycle of 3 seconds, sending data to the DSC module every 30 seconds. If a loss of tire pressure is detected, the test and data transmission cycle is shortened to 1 second. The effective working temperature of the wheel sensors is between -40℃ and +125℃. The lithium-ion battery of the wheel sensors is designed for a service life of 10 years.

16

4

Share

What is the standard tire pressure for SUV vehicles?

What Causes the Brake Noise in a New Sagitar?

What is the difference between a U-turn and a turn?

Can the Wuling Hongguang Mini be charged when the battery is not fully depleted?

What is the fuel consumption of the Pajero V93?

What Are the Reasons for Poor Cooling Effect of Car Air Conditioning?

What to Do When BMW RDC Tire Pressure Monitoring Fails?

What Causes an Electronic Steering Lock Failure in Cars?

Where is the jump-starting point for the Mercedes-Benz B200?

How to Lift Up the Wiper of Changan CS35?

Is the Borgward BXi7 a two-wheel drive or four-wheel drive vehicle?