What is the standard tire pressure for cars in summer?

2 Answers
McArcher
07/28/25 2:16pm
In summer, the normal tire pressure generally ranges between 2.2-2.5 kilopascals (kPa). During spring when temperatures are around 20°C, the recommended tire pressure is usually maintained at 2.3-2.5 kPa. Below is relevant information about tire pressure: 1. Concept: Tire pressure, strictly speaking, refers to the air pressure inside the tires. In automotive maintenance, the engine is considered the heart of a car—its failure would mean the end of the vehicle's lifespan. Similarly, tire pressure acts as the blood pressure of a car, where its level plays a crucial role in the vehicle's performance and power. 2. Importance of tire pressure: The inflation pressure of tires is also related to seasonal changes. Moreover, tire pressure is closely linked to the car's performance, affecting aspects such as ride comfort and load capacity, as well as influencing the lifespan of the tires.
Was this review help?
2
4
Share
LaFinley
08/11/25 10:24pm
I usually enjoy delving into car maintenance, and tire pressure in summer is indeed a key topic for sedans. Generally speaking, the standard tire pressure for sedans when cold is around 2.2 to 2.5 bar, depending on your car model. You can find this information on the label by the door frame or in the owner's manual. In summer, with higher temperatures, the air inside the tires expands when heated, increasing the tire pressure by about 0.1 bar for every 10-degree rise in temperature. Checking the wrong pressure under direct sunlight can easily lead to trouble. If the tire pressure is too high, the center of the tire wears out faster, increasing the risk of a blowout; if it's too low, it wastes fuel and causes tire deformation. I recommend checking the pressure with a tire gauge in the morning before driving, keeping it at the recommended value for safety. Here's a little tip: if you're planning a long trip, adjust the tire pressure in advance to save some fuel. In short, don't overlook this detail—checking it once a month is the most reliable approach.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

How to Determine the Vehicle's Emission Standard Level?

Methods to identify a vehicle's emission standard level: You can check the car's manual, where it is usually annotated on the environmental green label and the vehicle parameters section of the vehicle certification. Vehicle emission standards refer to regulations on the content of harmful gases emitted from vehicle exhaust, such as CO (carbon monoxide), HC plus NOx (hydrocarbons and nitrogen oxides), and PM (particulates, soot). To curb the production of these harmful gases and encourage automobile manufacturers to improve their products to reduce the source of these emissions, both Europe and the United States have established relevant vehicle emission standards. The European standards are the ones China references for vehicle emission regulations. Currently, domestically produced new vehicles will indicate the European emission standard that the engine's exhaust meets.
19
3
Share

How to adjust the steering wheel up and down on the Emgrand GL?

Emgrand GL steering wheel up and down adjustment method: 1. Release the steering wheel lock, then turn the steering wheel to the forward straight driving position; 2. Fully release the steering wheel lock lever A; 3. Hold the steering wheel with both hands and adjust it up and down to the appropriate position; 4. After selecting the suitable driving position, fully pull up the steering wheel lock lever A to lock the steering wheel in the new position. The Emgrand GL is a compact car under Geely Auto, with body dimensions of 4725mm in length, 1802mm in width, 1478mm in height, and a wheelbase of 2700mm. It is equipped with 1.4L and 1.5L turbocharged engines.
13
3
Share

Does the Audi A7 have a coupe version?

Audi A7 does not have a coupe version, this car only has a four-door version. It is a mid-to-large-sized sedan under the Audi brand. This car uses a total of three engines, which are the low-power version 2.0-liter turbocharged engine, the high-power version 2.0-liter turbocharged engine, and the 3.0-liter turbocharged engine. The body structure of the Audi A7 is a 5-door 4-seat hatchback, with dimensions of 4976mm, 1908mm, 1405mm, and a wheelbase of 2928mm. It is equipped with a 4-cylinder 2.0T 190 horsepower turbocharged engine, and both the front and rear suspensions use multi-link independent suspensions.
3
3
Share

What kind of car is Aston Martin?

Aston Martin is a British ultra-luxury car manufacturer listed on the stock exchange, with its headquarters located in Gaydon, UK. Taking the Aston Martin DB11 as an example, it is positioned as a supercar. In terms of body dimensions, the car measures 4739mm in length, 1940mm in width, and 1279mm in height, with a wheelbase of 2805mm. Power-wise, the Aston Martin DB11 is equipped with a 5.2T twin-turbocharged V12 engine, delivering a maximum output power of around 600 horsepower. In terms of exterior design, the dynamic waistline and floating roof design of the Aston Martin DB11 significantly enhance its sporty appeal. The taillights feature LED lighting, and the overall design exudes a strong futuristic vibe.
17
4
Share

Is Slight Idle Shaking Normal for the Atenza?

Atenza experiencing slight idle shaking is not normal and requires timely diagnosis and resolution. Causes of slight idle shaking include: 1. Dirty throttle body or severe carbon buildup: Clean the throttle body and inspect the idle air control valve for carbon deposits that need cleaning; 2. Ignition system issues: Check spark plugs for excessive carbon buildup and replace if necessary; 3. Unstable fuel pressure: Inspect fuel pressure and replace components as needed; 4. Aging engine components: Replace worn-out parts. The Atenza is Mazda's new-generation flagship mid-to-high-end sports sedan, with body dimensions of 4870mm in length, 1840mm in width, and 1450mm in height, a wheelbase of 2830mm, and a top speed of 215 km/h.
4
4
Share

What is the main function of urea solution?

Urea solution is mainly used to reduce nitrogen oxides in vehicle exhaust, lower the pollution level of exhaust gases, and help vehicles meet the national emission standards. Through the intelligent control of the SCR system, the vehicle will not start if the urea solution in the storage tank is insufficient. To ensure normal operation of the vehicle, an adequate supply of urea solution should be maintained. Vehicle urea solution is an essential product for heavy-duty diesel vehicles to meet the National IV emission standards. It refers to an aqueous urea solution with a urea concentration of 32.5% and a solvent of ultra-pure water, made from urea crystals and ultra-pure water. For heavy-duty trucks, buses, and other diesel vehicles to achieve the National IV emission standards, an appropriate SCR system must be selected for exhaust treatment, and this system must use urea solution to treat nitrogen oxides in the exhaust gases.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.