What is the standard size of a motorcycle parking space?

1 Answers
DavidLee
07/28/25 3:25pm
The standard size of a motorcycle parking space is 1.93 meters in total length, 0.6 meters in total width, and 1.15 meters in total height. Precautions for choosing underground parking spaces: 1. Choose a location close to the elevator: When selecting an underground parking space, it is best to choose one that is close to the elevator. This is very convenient whether you are picking up your car in the morning or parking at night, especially for women who often return alone. The closer the parking space is to the elevator, the higher the safety. 2. Parking spaces with separate spaces: Parking spaces that are separated by existing buildings or facilities are better, such as parking spaces between two pillars. Generally, there is plenty of space, and it is also very convenient to open and close car doors and reverse on weekdays. You basically don’t need to consider whether it will affect the cars next to you, nor do you have to worry about accidentally bumping into other people’s cars. 3. Choose a parking space close to the pillar: If there is more than one parking space between two pillars in an underground parking lot, it is best to choose a parking space close to the pillar. This way, even if a car is parked on one side, the door on the other side can be opened freely without affecting others and is also convenient for your own use.
Was this review help?
9
2
Share
More Forum Discussions

How to Read the Gauge on an Air Conditioning Refrigerant Pressure Meter?

Depending on the ambient temperature, the low pressure of a refrigeration system during normal operation generally ranges between 3 to 6 bar, while the high pressure ranges between 10 to 25 bar. Below is relevant information about air conditioning refrigerant pressure meters: 1. Why does an air conditioner need Freon?: Freon is the medium that transfers heat in an air conditioning refrigeration system. Without it, heat cannot be effectively exchanged, and the air conditioner cannot cool or heat. Therefore, if the air conditioner lacks Freon, external symptoms may include poor cooling (or heating), no cooling (or heating), protective shutdown, water leakage from the indoor unit (sometimes spraying water), and ice formation on the indoor evaporator. There are also unseen issues—reduced lifespan of the air conditioner, wasted electricity, and damage to the air conditioner's compressor. Thus, to use an air conditioner normally, there must be sufficient Freon. 2. How much Freon should be added to an air conditioner?: During hot summer weather (when the ambient temperature is above 32°C), the pressure gauge needle should stabilize at 0.45 MPa. In spring and autumn, it should be 0.3 MPa. In winter, Freon addition is not entirely based on the pressure gauge reading (the reference pressure is 1.8 MPa), but rather relies on the technician's experience or observing the amplitude of the pressure gauge needle's swing.
14
3
Share

When will Beijing stop allowing registration of China 5 vehicles?

Beijing stopped allowing registration of China 5 emission standard vehicles on July 1, 2019. Vehicles sold before this date that meet the China 5 emission standards must complete registration before October 1. Late registrations will not be processed. Below is relevant information about China 6: 1. Phases: The country has divided the "China 6 standard" into two phases, "China 6a" and "China 6b," with nationwide implementation planned for 2020 and 2023, respectively. However, many regions have implemented the China 6 standard ahead of schedule. After July 1, China 5 vehicles cannot be registered. (Other provinces should follow local policies.) However, there is usually a transition period for standard implementation. For example, Henan Province has set a one-month transition period. Vehicles with purchase invoices issued before the standard implementation date can complete registration within one month after the standard takes effect. 2. Announcement: The China 6 standard was announced by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine on December 23, 2016, and June 22, 2018, respectively. The "Limits and Measurement Methods for Emissions from Heavy-Duty Diesel Vehicles (China VI)" came into effect on July 1, 2019. The implementation of the China 6 standard imposes stricter requirements on emissions such as carbon monoxide, nitrogen oxides, and hydrocarbons.
16
3
Share

What does Chevrolet mild hybrid mean?

It refers to adding a 48V mild hybrid system to the existing fuel-powered vehicle models. This system assists the vehicle during startup, thereby reducing fuel consumption. The greatest advantage of the 48V mild hybrid is that it can maintain the air conditioning cooling for a period of time even when the engine is turned off. Additionally, it provides a stronger sense of power during mid-to-low speed acceleration, and sufficient low-end torque at low speeds. Pros and cons of mild hybrid vehicles: 1. Advantages: The application of the 48V mild hybrid system enables the vehicle to support higher-power onboard systems, drive more powerful start-stop motors, and more easily rotate the engine crankshaft to wake up the engine, reducing system operation delays and jerky sensations. It also allows for more functionalities. Moreover, the 48V mild hybrid system can reduce energy consumption and emissions by approximately 15-20%. 2. Disadvantages: If the voltage is too high, issues such as high-voltage circuit protection, electromagnetic compatibility, and the stability of the onboard electrical system need to be considered, which can rapidly increase development costs. Fortunately, the 48V voltage is not excessively high, so system design under this framework is not overly complex. Most fuel-powered vehicles can retain their original powertrain architecture and overall layout. The 48V voltage is a good choice that balances cost, safety, and performance.
13
0
Share

How to Deal with the JMC DPF Warning Light?

JMC DPF warning light solutions are as follows: 1. Automatic Regeneration: When the DPF indicator is green, no manual intervention is needed. This usually occurs when the vehicle is driven at high speeds. Continue driving normally until the particulate matter is processed, and the DPF light will turn off automatically. 2. Manual Regeneration: The DPF yellow indicator light will flash, which typically happens when the vehicle is driven at speeds below 80km/h. In this case, promptly pull over away from roads, flammable, and explosive materials. Once the vehicle is stationary, shift to neutral, engage the parking brake, and press the DPF control button. The yellow light will stay on continuously, and the process takes about 15-30 minutes. Once the particulate matter is processed, the light will turn off automatically. 3. On-Demand Regeneration: This can be performed at any time and is suitable for users who mainly drive in urban areas. For example, after parking the car at home, press and hold the DPF button for 3-5 seconds to initiate a check. If the yellow light flashes, it indicates the need for manual regeneration. Press the DPF button again, and the yellow light will stay on. Wait for 15-30 minutes until the light turns off, indicating the particulate matter has been processed.
18
5
Share

Differences Between Inspire and Accord

There are 4 main differences between the Inspire and Accord: 1. Exterior: The primary distinction lies in the front fascia. Both the Accord and Inspire feature a sporty overall design with a fastback silhouette, exuding dynamism and modernity. The key differences are in the front grille, lower bumper design, and completely distinct headlight configurations. The Accord's front end presents a cool, aloof expression, while the Inspire appears to be gritting its teeth and glaring straight ahead. 2. Dimensions: The Inspire is slightly longer than the Accord: (1) Inspire: Length 4910mm, Width 1862mm, Height 1450mm, Wheelbase 2830mm; (2) Accord: Length 4893mm, Width 1862mm, Height 1449mm, Wheelbase 2830mm. 3. Interior: The Accord's cabin design is more distinctive. The 10th-generation Accord features premium interior styling, while the Inspire adopts the same design to reduce costs, resulting in less novelty. 4. Powertrain: The Accord offers an additional 1.5T low-power engine variant. Both models comply with China VI emission standards and are available with hybrid 2.0L and high-power 1.5T engine options. However, the Accord exclusively features a 1.5T low-power engine variant not available in the Inspire.
5
3
Share

What is the minimum ground clearance of the Nissan Qashqai?

The latest minimum ground clearance of the Nissan Qashqai is 199mm. Below is an introduction to the Nissan Qashqai: 1. As a true urban driving and control SUV, the Qashqai was designed from the outset with multifunctional integration in mind, incorporating the characteristics of both SUVs and sedans. It optimizes and balances aspects such as exterior design, interior, handling, and comfort, refining its core product strength. 2. The exterior adopts Nissan's new V-Motion design language, featuring a front face with a new-style 'V' grille complemented by chrome accents. The headlights on both sides have been redesigned, with a slender shape and added internal lenses. 3. In terms of interior configuration: the new Qashqai comes with a new-style steering wheel and a 9-inch high-definition capacitive touchscreen, equipped with the Connect Nissan Intelligent System. This system provides intelligent voice control, 24-hour entertainment, all-time navigation, and remote real-time monitoring, enabling over 200 scenarios of intelligent human-vehicle interaction. 4. For the powertrain: the new vehicle is equipped with a 2.0L inline four-cylinder naturally aspirated engine, with a maximum power increase of 3KW compared to the current model, and a fuel consumption of only 6.0L per 100 kilometers, which is 13% lower than the previous model. It also supports the China 6B emission standard.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.