What is the standard size for parallel parking spaces?

1 Answers
McMaggie
07/29/25 4:54pm
According to national regulations, the dimensions for parallel parking spaces are as follows: 1. Large vehicle parking space: The width is 4 meters, and the length ranges from 7 to 10 meters, depending on the vehicle type. 2. Small vehicle parking space: The width ranges from 2.2 to 2.5 meters, and the length is 5 meters. 3. Roadside parking space: Single-sided parking requires a width of 5 meters, double-sided 6 meters, and for large vehicles, 8 meters. The requirements for parallel parking are as follows: The driver must maneuver the vehicle into the right-side parking space (or garage) using a forward and backward method without touching or scraping the parking space poles, and without the wheels crossing the lane boundary lines or parking space boundary lines.
Was this review help?
19
5
Share
More Forum Discussions

Why is the car steering wheel particularly heavy?

Car steering wheel is particularly heavy due to: 1. Insufficient tire pressure; 2. Contaminated power steering fluid; 3. Internal failure of the power assist system; 4. Poor bearing lubrication. Solutions for a heavy car steering wheel: 1. Replenish hydraulic power steering fluid; 2. Replace circuit fuses; 3. Replace flat bearings and replenish kingpin grease; 4. Increase lubrication for the steering tie rod ball joints. The working principle of a car steering wheel is to transmit torque to the rack and pinion mechanism, thereby pushing the wheels to turn left or right. Steering wheels are categorized into: single-spoke, dual-spoke, three-spoke, and four-spoke steering wheels.
13
1
Share

What is the Normal Voltage of a 12V Car Battery?

Car 12V battery normal voltage is: no-load voltage is around 13V, load voltage should not be lower than 11V. Functions of the battery: 1. Supply power to the starting system, ignition system, and electronic fuel injection system when starting the engine; 2. Provide power to car electrical equipment when the engine is off or at low idle; 3. Participate in power supply when electrical demand exceeds the generator's supply capacity; 4. Stabilize voltage and protect electronic equipment in the car. Battery maintenance methods: 1. Clean the battery regularly; 2. Avoid using electrical equipment when the engine is off; 3. Replace the battery periodically; 4. Start the car regularly.
5
1
Share

How Often Should the Transmission Fluid of a Tiida Be Changed?

The transmission fluid of a Tiida should be changed every 2 years or 40,000 kilometers. The methods for changing the transmission fluid are: 1. Gravity drain: Loosen the tightening nut at the bottom of the oil pan, and the transmission fluid will automatically flow out from the drain hole; 2. Machine circulation: Connect the transmission and the circulation machine through pipeline interfaces to push out the old fluid with new fluid; 3. Remove the oil pan for fluid change. Taking the 2021 Tiida as an example, it is a compact car with body dimensions of length 4393mm, width 1766mm, height 1539mm, a wheelbase of 2700mm, and a curb weight of 1180kg. The 2021 Tiida is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, a maximum torque of 155Nm, and a maximum power of 96kW.
7
1
Share

What is the reason for tiny bubbles after tire repair?

Tiny bubbles appearing after tire repair are caused by: the inner liner not being promptly or properly repaired after a puncture, resulting in incomplete restoration of the inner liner. This allows air to leak from inside the tire through the damaged area of the inner liner. The functions of tires are: 1. To support the entire weight of the vehicle and bear the load of the car; 2. To transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface; 3. To mitigate and absorb vibrations and impact forces during driving, preventing severe vibrations and premature damage to vehicle components; 4. To adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring driving safety, handling stability, comfort, and fuel economy.
15
5
Share

Can a Bulging Tire Still Be Used?

A bulging tire cannot be used and needs to be replaced. The process of replacing a tire includes: 1. Loosening the screws; 2. Lifting the vehicle with a jack; 3. Removing the screws that secure the wheel, where counterclockwise loosens and clockwise tightens; 4. Taking off the old tire; 5. Installing the new wheel. The functions of a tire are: 1. Supporting the entire weight of the vehicle and bearing the vehicle's load; 2. Transmitting traction and braking torque, ensuring the adhesion between the wheel and the road surface; 3. Reducing and absorbing vibrations and impact forces during driving, preventing severe vibrations and premature damage to vehicle components; 4. Adapting to the vehicle's high-speed performance and reducing driving noise, ensuring safety, handling stability, comfort, and energy efficiency.
13
0
Share

Does the Corolla have a defogging function?

The Corolla has a defogging function. The method to activate the defogging function is as follows: 1. For manual air conditioning, turn the air direction adjustment knob to the defrost/defog mode; 2. Direct the air conditioning vents towards the glass, using cold air in summer and warm air in winter; 3. Adjust the fan speed and temperature as needed; 4. For automatic air conditioning, there is a dedicated defogging button—simply press it. Taking the 2021 Corolla as an example, it is a compact car with body dimensions of 4635mm in length, 1780mm in width, and 1455mm in height, a wheelbase of 2700mm, and a fuel tank capacity of 50 liters.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.