What is the standard size for a C1 parallel parking space?

1 Answers
StellaLynn
07/30/25 8:33am
C1 parallel parking space size standard is based on the test vehicle as a reference. The length of the parallel parking space is 1.5 times the length of the test vehicle plus an additional 1 meter, while the width is the width of the test vehicle plus 80 centimeters. The width of the entire lane is 1.5 times the width of the test vehicle plus 80 centimeters. A rectangle formed with these dimensions serves as the standard size diagram for parallel parking. During the test, crossing the lines is not allowed, and the vehicle body must not extend beyond the lines after parking. C1 driver's license test: The test includes four subjects: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge. Passing standards: Traffic regulations and related knowledge (Subject 1) – Written test, full score of 100, passing score is 90 or above. Field driving (Subject 2) – On-site, actual vehicle. Minimum passing score is 80, below 80 is a fail. Road driving (Subject 3) – Highway or simulated field, actual vehicle. Full score of 100, passing score is 90 or above. Safe and civilized driving knowledge – Written test, questions mainly in the form of cases, pictures, animations, etc., including true/false, single-choice, and multiple-choice questions, totaling 50 questions. Full score of 100, passing score is 90.
Was this review help?
1
5
Share
More Forum Discussions

How to Deal with Squeaking Sounds When Opening Car Doors?

Solutions for abnormal noises when opening and closing car doors: 1. Check for aging: Inspect whether the door seals are aged, and it is recommended to replace the seals; 2. Check for foreign objects: Examine the door gaps for any foreign objects, which need to be cleaned out; 3. Poorly fixed components: Abnormal noises caused by poorly fixed components between the door parts can be resolved by tightening the screws; 4. Insufficient body stiffness: Friction between steel plates due to insufficient body stiffness or welding detachment, and it is recommended to have it repaired at a maintenance shop. Design requirements for car doors: 1. Ensure convenience for passengers getting on and off, with the opening angle controlled at around 65 to 70 degrees; 2. No positional interference with other parts during the opening process; 3. Reliable locking when the door is closed, preventing it from opening on its own while driving; 4. Good sealing performance; 5. Large light-transmitting area to meet lateral visibility requirements; 6. Sufficient strength and stiffness to ensure reliable door operation, reduce door vibrations, enhance vehicle lateral collision safety, and prevent door sagging.
4
3
Share

How to Quickly Remove Odors Inside the Car?

Here are methods to quickly eliminate odors inside the car: 1. Ventilation and Sunlight Exposure: The first step is to ventilate the car. On sunny days, park the car in a dry, well-ventilated area to air it out. This method provides immediate results in removing odors. Avoid parking in damp areas for extended periods, as it can lead to musty smells and negatively impact the car's lifespan. 2. Orange or Grapefruit Peels: Placing orange or grapefruit peels inside the car can help eliminate odors and freshen the air. These fruit peels have strong odor-absorbing properties, not only releasing a pleasant fragrance but also effectively neutralizing unpleasant smells, creating a refreshing atmosphere. 3. Activated Charcoal Bags: Activated charcoal is highly effective in absorbing odors, including formaldehyde and other unpleasant smells. Placing activated charcoal bags inside the car is an excellent way to remove odors. 4. Vinegar: Acetic acid in vinegar can neutralize formaldehyde and other odors inside the car, helping to eliminate harmful substances. When the car is not in use, mix vinegar with water in a spray bottle. Spray it on seats and door interiors, then wipe with a cloth.
5
4
Share

Why Can't the Sunroof of BMW 5 Series Open?

There are many reasons why the sunroof of a BMW 5 Series car cannot open, with the most common being the following four: 1. Sunroof circuit malfunction; 2. Damage to the sunroof drive motor; 3. Severe lack of lubrication in the sunroof track, causing the sunroof seal to stick to the car body; 4. Presence of foreign objects in the sunroof slot. Here is some related information about the BMW 5 Series: 1. Vehicle positioning: The BMW 5 Series is a mid-size luxury sedan under BMW, and it is a C-class sedan. 2. Power aspects: The domestically produced BMW 5 Series uses two engines: one is a low-power version 2.0-liter turbocharged engine, and the other is a high-power version 2.0-liter turbocharged engine. 3. Suspension type: The BMW 5 Series uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
7
4
Share

Can a Mainland Driver's License Be Used in Taiwan?

Mainland driver's licenses cannot be used in Taiwan. Here are the specific reasons: 1. Mutual Non-Recognition of Each Other's Driver's Licenses: Primarily because Mainland China is not a signatory to the Geneva Convention, and both sides do not recognize each other's driver's licenses. Therefore, a Mainland driver's license is not valid in Taiwan. Many so-called international driver's permits are merely translations of the Mainland China driver's license, and Taiwan does not recognize these translated versions either. 2. Taiwan's Regulations: According to current regulations in Taiwan, even if a Mainland driver's license is converted into a so-called international driver's permit, driving with it is considered unlicensed and subject to fines. In cases of drunk driving or accidents, not only will there be no insurance compensation, but the driver will also face legal liabilities. This could even affect the emergency contact's future entry to Taiwan. The only way to rent or drive a car in Taiwan is to first obtain a driver's license from a third region (such as Hong Kong, the United States, or many other countries and regions worldwide) and then obtain an international driver's permit issued by that third region (e.g., the United States).
18
0
Share

What are the methods to remove ice from car windows after they freeze?

Here are the solutions for dealing with frozen car windows in winter: 1. Turning on the heater: There are two types of air conditioning systems, manual and automatic: For manual air conditioning, first turn the temperature knob to the lowest position in the red zone and set the heater to the hottest setting. Then, rotate the air distribution mode button to the windshield defrost position. Next, turn off the recirculation button and set the fan speed to 4 or higher—the higher the speed, the faster the ice will melt. For automatic air conditioning, simply select the front window defrost button on the center console, and the system will automatically adjust to the highest temperature and maximum fan speed. 2. Ice removal tools: If you live in a particularly cold area where the windshield freezes every morning, consider purchasing ice removal tools such as an ice scraper. These tools can be quicker and more effective. 3. De-icer: Car window de-icer is a specialized antifreeze concentrate designed to thaw frozen windows and wipers without damaging the car's surface. It can effectively prevent window freezing even without using the car's heater. If ice has already formed, simply spray the de-icer onto the inner surface of the car window and wipe it clean.
10
0
Share

How to Charge a Motorcycle When the Battery is Dead?

When a motorcycle's battery is dead, you can remove the battery from the vehicle and charge it using a dedicated charger. If you don't have a charger, you can take it to a professional motorcycle repair shop for charging. Before charging, first remove the battery from the motorcycle and inspect it. If there is obvious sulfation, deposits accumulated below the electrodes, or cracks and leakage on the battery's surface, the battery should be replaced. If your motorcycle battery is dead, you can use the following methods to charge it: 1. Self-charging while riding: By pushing the motorcycle or using other methods to start the engine, the motorcycle's magneto can generate electricity and automatically charge the battery. The motorcycle magneto, also known as the motorcycle generator, is a small alternator that uses permanent magnets to create a magnetic field. The generated current is then rectified through a rectifier circuit to power the motorcycle's lights, battery, etc. 2. Using a charger: Standard 12V DC chargers cannot charge a motorcycle battery because their output current is too low. Nowadays, there are many smart dedicated chargers on the market that can automatically identify 12V and 24V batteries and come with multiple protection features, making them suitable for charging motorcycle and car batteries. You can use such chargers to replenish the power of your motorcycle battery.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.