What is the standard amount of refrigerant to add to a car?

1 Answers
LeSamantha
07/30/25 6:02am
Generally, adding 3 to 4 cans is sufficient, depending on the compressor's displacement and the length of the air conditioning pipes. Here are the details: 1. Standard range: Typically, small cars require between 450g to 600g, while some SUVs may need between 600g to 1000g. It's essential to monitor the gauge when adding refrigerant; adding more won't help if it's not cooling. Usually, about three cans will provide adequate cooling, but the decision to add more should be based on pressure readings. 2. Introduction to refrigerant: Refrigerant, commonly known as 'snow seed' in some southern regions, is the working substance that continuously circulates within the refrigeration system and achieves cooling through its own state changes. The refrigerant absorbs heat from the cooled medium (such as water or air) and vaporizes in the evaporator, then releases heat to the surrounding air or water and condenses in the condenser.
Was this review help?
4
3
Share
More Forum Discussions

Should You Fill Up a New Car's Tank Completely?

Because the temperature of fuel varies when the vehicle is parked versus when it is in motion, the seasonal and environmental conditions under which the vehicle operates differ. If the fuel tank is overfilled, gasoline may expand due to heat and overflow from the tank opening, which is unsafe. Typically, the fuel tank should have a 5~7% expansion space reserved to ensure driving safety. If the tank is too full, there will be no space left at the top of the tank, especially in summer when gasoline vaporizes. This can lead to a lack of space for the vapor, potentially causing fuel choking. If the vehicle's fuel tank is overfilled (visible fuel at the tank opening), the tank's vent will be submerged in gasoline, forcing liquid fuel into the carbon canister and causing damage to it.
9
3
Share

Can You Modify the Car Emblem?

It is not allowed to arbitrarily change the car emblem. According to the "Motor Vehicle Management Regulations," a fine of 500 yuan will be imposed, the vehicle's driving license will be confiscated, and the driver will be ordered to restore the original emblem. For repair shops that illegally modify or assemble motor vehicles, they will be ordered to make corrections, and any illegal income will be confiscated. Relevant information about car emblems is as follows: Introduction: The car emblem, short for automobile logo, refers to the symbols of various car brands, which often become the representatives of automobile companies. The car emblem includes: the car's trademark or factory logo, product label, engine model and serial number, vehicle model and serial number, and vehicle identification code, etc. Do Not Arbitrarily Change the Car Emblem: Arbitrarily changing the car emblem violates the "Motor Vehicle Management Regulations": The car emblem must match the model of the vehicle, and misappropriation is not allowed. Once discovered, it will be dealt with according to the national regulations on the safety technical conditions for motor vehicle operation.
12
5
Share

How to Replace the Key Battery for Mercedes-Benz Vito?

Method for replacing the key battery of Mercedes-Benz Vito: 1. There is a button on the back of the key. Press this button and push the back cover of the key forward to open it; 2. The battery is located in the adjacent slot. Remove the old battery by prying open the slot and replace it with a new one. Most Mercedes-Benz key batteries use the model 3V CR2025; 3. After replacing the battery, reattach the back cover of the key. Taking the 2020 Elite Edition 8-seater Mercedes-Benz Vito as an example, it is an MPV with body dimensions of 5370mm in length, 1928mm in width, 1880mm in height, and a wheelbase of 3430mm, equipped with a 2.0T turbocharged engine.
19
2
Share

Which Gear is the Forward Gear in an Automatic Transmission?

In an automatic transmission, the D (Drive) gear is the forward gear. During normal driving, place the gear selector in the D position. The car will automatically shift between forward gears, allowing you to drive simply by engaging the D gear. The driver only needs to operate the accelerator and brake pedals. The P (Park) gear is the parking gear; engaging P after stopping the vehicle with the brake will lock the wheels, preventing the car from moving. The R (Reverse) gear is for reversing, while the N (Neutral) gear is typically used when waiting at a red light. The S (Sport) mode keeps the engine running at high speeds, enhancing the car's power. The L (Low) gear is for low-speed driving, usually employed when descending long slopes to maintain the car in the lowest gear. The M (Manual) gear is only available in automatic transmissions with a manual mode, allowing the driver to switch to manual gear shifting by engaging M and then adjusting the gears manually.
8
3
Share

How to Adjust the Time on the Lavida Car Display Screen?

Method to adjust the time on the Lavida car display screen: 1. Insert the key and turn the ignition switch to the ON position to illuminate the instrument panel; 2. There are two buttons on the instrument panel, the left one is the time symbol, and the right one is the SET button; 3. Locate the SET button on the instrument panel to start adjusting the time. Select the hour value, then use the volume adjustment button on the steering wheel to adjust the value to the correct hour; 4. Next, adjust the minute value to one minute ahead of the correct time. Watch your phone and press OK when it jumps to the next minute. The Lavida is a compact sedan launched by SAIC Volkswagen, with dimensions of 4605mm in length, 1765mm in width, and 1460mm in height, and a wheelbase of 2610mm. It is equipped with a 1.4L turbocharged engine and a 1.5L naturally aspirated engine.
11
1
Share

What is the RX5?

RX5 is the Roewe RX5 under SAIC Motor. Taking the 2020 Roewe RX5 as an example, it is a compact SUV with body dimensions of 4556mm in length, 1855mm in width, and 1719mm in height, and a wheelbase of 2700mm. The Roewe RX5 is equipped with a 1.5T in-cylinder direct injection turbocharged engine, with a maximum power of 124kw and a maximum torque of 250nm, featuring an aluminum alloy cylinder head and block, paired with a 6-speed manual transmission (MT). This vehicle adopts a front-engine, front-wheel-drive layout, with a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.