What is the standard amount of engine oil for Toyota Yaris?
1 Answers
Toyota Yaris requires 3.3 liters of engine oil as the standard amount. Below are the specific steps for oil change: 1. Start the vehicle and let it reach normal operating temperature, then turn off the engine. The purpose of warming up the engine before oil change is to allow the oil to flow fully and carry out impurities. Then use a jack to lift the vehicle and engage the handbrake. 2. Use the onboard tools to loosen the drain plug at the bottom of the oil pan to drain the oil. Note that the used oil should be collected in a container to avoid environmental pollution. After the oil is completely drained, reinstall the drain plug, being careful not to overtighten it to prevent damage to the oil pan. 3. Use an oil filter wrench to loosen the oil filter. Apply new oil to the oil seal of the new filter, then manually install the new oil filter and tighten it with a tool. 4. Pour the new oil into the oil filler port, using a funnel if necessary. 5. After adding the oil, check for any leaks. If there are no abnormalities, remove the jack and lower the vehicle. Use the dipstick to confirm the oil level, then restart the vehicle to check if any warning lights are illuminated.