What is the Spirit of Chery People?

Must the ETC be registered under the vehicle owner's name?

ETC can also be applied for by non-owners. According to the "Implementation Plan for Accelerating the Application of Electronic Non-stop Toll Collection on Highways" issued by the Ministry of Transport, the original valid ID card of the vehicle owner, the original and a copy of the vehicle registration certificate (the page with the most recent annual inspection stamp) are required. If applying on behalf of someone else, the original valid ID card of the agent is also needed. If applying for ETC through major bank branches, a corresponding debit or credit card from the bank is required. Some banks only support ETC binding with credit cards, while others may require freezing a portion of the amount as a security deposit when binding with a debit card. Online application is also available: Since various banks have their own online services and sections, they have launched online ETC application services to facilitate vehicle owners, allowing applications to be made without leaving home. ETC charging principle: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane of the toll station, and using computer networking technology for backend settlement with banks, the purpose of paying tolls without stopping at the toll station is achieved. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Save time: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Reduce wear and tear: Saves costs, decreases the frequency of vehicle starts and brakes, lowering wear and fuel consumption; Improve efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times or more, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key urban clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased," and explicitly set the goal in the "13th Five-Year" comprehensive transportation development indicators that "by 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, the future will also promote the use of ETC for trucks, explore the deep integration of the ETC system with vehicle-to-vehicle communication, vehicle-road coordination, and other smart transportation development directions, providing vehicle owners with comprehensive travel services. This means that more application scenarios will support ETC applications.

1

3

Share

Can a driver's license be inspected in a different location?

Driver's licenses can be inspected in a different location. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the annual inspection of a driver's license should be conducted at the vehicle management office of the issuing location or a vehicle management office outside the issuing location. For Class C driver's licenses, the inspection can be conducted at any city's vehicle management office within 90 days before the expiration date. For Class A and B driver's licenses, the inspection should be conducted within 30 days after the end of the scoring cycle. Class C driver's license: Class C driver's licenses do not require an annual inspection, only an inspection when renewing the license. During the inspection, the "Motor Vehicle Driver's License Application Form" needs to be filled out, and relevant materials must be submitted. Once the materials and application form are reviewed by the staff, the inspection can be completed. Proceed to the designated window to pay the processing fee, and after a short wait, the new driver's license can be collected. Class A and B driver's licenses: Class A and B driver's licenses only require an inspection if there are demerit points recorded within one scoring cycle. Submit the materials at the vehicle management office service window and undergo the inspection. During the inspection, it is necessary to participate in at least three hours of study on road traffic safety laws and regulations, safe and civilized driving, emergency response, and other knowledge, as well as receive case-based warning education on traffic accidents.

15

2

Share

What does ETC lane mean?

ETC lanes are dedicated express toll collection lanes for vehicles equipped with ETC (Electronic Toll Collection) systems. Only vehicles with ETC can use these lanes. When an ETC-equipped vehicle passes through, the toll station automatically detects the vehicle's ETC device and opens the ramp barrier simultaneously. Vehicles with ETC can achieve non-stop fast passage on ETC lanes, which is particularly noticeable when there is heavy traffic on highways. ETC charging method: It utilizes specialized short-range microwave communication between the vehicle-mounted RFID tag installed on the windshield and the microwave antenna on the ETC lane at the toll station. Through networked software technology, it connects with banks for back-end settlement processing, thereby achieving the purpose of paying tolls without stopping at bridge and road toll stations. Banks install this type of ETC express card with a 'pass first, pay later' approach. ETC application conditions are as follows: Provide the original and photocopies of the vehicle owner's valid ID card and vehicle registration certificate. The photocopy of the driver's license should include the page with the most recent annual inspection stamp. Postal credit card application form. This credit card is used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS slip to a designated postal outlet to receive and install the ETC onboard device for free, with no additional charges. Applicants must be between 18 and 60 years old. Own a vehicle registered under the applicant's name. Here are some precautions for installing ETC: Do not obstruct the view. It is best to install it behind the rearview mirror: Many car models have steeply angled windshields, which can reduce the driver's field of vision. If ETC installation does not consider this, it may increase blind spots. Installing it on the right side behind the rearview mirror can avoid obstructing the view. Avoid affecting charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas on the windshield and positions that might block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield presses the anti-removal lever in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable, requiring a visit to an ETC service point for unlocking. This is designed to prevent multiple vehicles from sharing one device. Notes for using ETC: The ETC transaction sensing range is 8 meters. To prevent issues caused by the vehicle in front's ETC device malfunctioning, maintain a distance of more than 10 meters to avoid automatic payment for the vehicle ahead. The ETC lane recognition speed is 20 km/h; excessive speed may lead to failure in reading the vehicle's device information and result in failed charges. When using a debit card to bind ETC, insufficient balance may also cause charging failures.

18

5

Share

What Are the Benefits of Applying for a Fuel Card?

Fuel cards are used to store money for refueling vehicles, similar to bank cards, but they can only be used for purchasing fuel. The benefits of applying for a fuel card are as follows: Fast Refueling: Fuel cards allow for self-service refueling, eliminating the need for staff assistance and long queues. They are also networked across gas stations nationwide, enabling universal usage with a single card. Convenient Usage: Simply insert the card for refueling, and the payment is automatically settled without cash transactions or the hassle of change. This eliminates the inconvenience of carrying cash and improves refueling efficiency. Secure Transactions: One card per vehicle, dedicated for fuel use only. The card can be reported if lost, and transactions require a password, enhancing fund security. This avoids losses from counterfeit money and reduces the risk of carrying large amounts of cash. Discounts and Promotions: Some fuel cards offer discounts, such as a 5% discount with China Merchants Bank cards or free gifts like Giant bicycles with Bank of Communications cards. Additionally, some local self-service gas stations may offer slightly lower prices. Reward Points: Many fuel cards are registered cards that provide reward points for refueling. Accumulated points can be redeemed for gifts and various value-added services.

16

0

Share

Can Modified Wheels Pass the Annual Inspection?

As long as the modifications comply with traffic regulations, modified wheels can pass the annual inspection. The size and specifications of the new wheels must match those of the original factory wheels, but the style can be changed. For example, if the original wheel specifications are 16 inches with a J-value of 5.5, the new wheels must also have the same specifications. Additionally, after the modification, you should register the changes with the vehicle management office within 10 days. Failure to do so may result in penalties from traffic police. Once the vehicle management office staff have inspected the modifications, you can obtain a new vehicle registration certificate and use the vehicle normally. Vehicles with any of the following conditions must undergo the necessary procedures before they can be inspected: Vehicles whose condition does not match the details on the registration certificate or in the records; vehicles with damaged, incomplete, or illegible license plates or registration certificates, or those with self-made license plates; vehicles with modifications, alterations, or technical transformations that have not undergone approval and change procedures; vehicles that have not been marked with the required unit name and enlarged license plate characters; vehicles that do not have alarms or indicator lights installed as required; vehicles that have not paid the required road maintenance fees or insurance.

18

5

Share

Where is the light switch on the Borgward?

Borgward BX7 light switch is located on the control lever under the steering wheel. The lever on the right side of the steering wheel turns on the headlights. Pushing the lever forward activates the high beams, pulling it back to the original position switches to low beams, and pulling it backward and releasing flashes the high beams as a warning. The hazard lights are sometimes located on the steering wheel or just below the front of the steering wheel, usually in a noticeable red color. Below is a detailed introduction to the specific locations of the lights on the Borgward BX7: Hazard lights (emergency flashers): Usually located near the center console, it is the only red button. Pressing it downward activates the emergency flashers. Fog lights: Usually located on the headlight control lever with a fog light symbol. Rotating it forward turns on the front fog lights, and rotating it backward turns on the rear fog lights. High beams and low beams: Some are located at the turn signal lever, while others are on the control panel. Switching between high and low beams is done by flipping the lever up and down (turning is done by flipping left and right, while high/low beams are controlled by flipping up and down). The hazard lights are on the instrument panel, marked with two overlapping triangles.

13

5

Share

What is the Spirit of Chery People?

Must the ETC be registered under the vehicle owner's name?

Can a driver's license be inspected in a different location?

What does ETC lane mean?

What Are the Benefits of Applying for a Fuel Card?

Can Modified Wheels Pass the Annual Inspection?

Where is the light switch on the Borgward?

How Large Must Hailstones Be to Damage a Car?

Are Turbocharged Cars Suitable for High-Speed Driving?

How to Steer in the Curve Driving Test for Subject 2?

Is it suitable for a new car to run on the highway?