What is the speed requirement for straight-line driving in Subject 3?

2 Answers
Diane
07/24/25 5:54am
The speed for straight-line driving in Subject 3 should not be lower than 40 km/h. Here are some details about the Subject 3 test: 1. Key points to note: The speed for straight-line driving must not be lower than 40 km/h, and the steering wheel movement should not exceed 3 degrees. The straight-line driving must be completed within the specified distance. If there are many vehicles ahead, you can stop briefly, wait for the vehicles ahead to move a bit, and then start again. However, stopping on a pedestrian crossing is strictly prohibited, as it will result in an immediate failure. 2. Brief introduction: Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed.
Was this review help?
16
2
Share
McMaverick
08/11/25 1:39am
I remember when I was taking my driving test, the instructor repeatedly emphasized that during the straight-line driving section of the third test, maintaining a steady speed was crucial, typically between 30 to 40 kilometers per hour. This speed range ensures the car doesn't drift or veer off course if too fast, or stall and lose momentum if too slow. The key points were to gently press the accelerator without sudden acceleration or deceleration, and to make slight steering adjustments with minimal wheel movement—no more than a degree or two, otherwise you'd fail. It's important to focus your gaze about 100 meters ahead rather than fixating on the dashboard, as that can distract you and lead to unstable steering. During practice, I always chose wide, flat roads to run through the drill multiple times, getting familiar with the car's idle speed and handling, which made passing the test on the first try easier. Mastering this speed control is fundamental for driving skills later on. Accumulating experience through regular practice ensures you won't panic during the test. Consistency in speed is the main focus; keeping deviations within a reasonable range guarantees a smooth pass.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

What engine does the Porsche 918 use?

The Porsche 918 is equipped with a 4.6-liter V8 naturally aspirated engine, combined with a dual-motor hybrid system, and paired with a 7-speed dual-clutch transmission. This engine delivers a maximum power output of 447 kW and a peak torque of 500 Nm. It features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. The Porsche 918 has a body length of 4643 mm, width of 1940 mm, and height of 1167 mm, with a wheelbase of 2730 mm. It employs a mid-engine four-wheel-drive layout, with a double-wishbone independent front suspension and a multi-link independent rear suspension.
18
1
Share

What do H and L on car air conditioning pipes mean?

H and L on car air conditioning pipes refer to the distinction between the high-pressure pipe and the low-pressure pipe of the air conditioning system. H stands for the high-pressure pipe interface, while L stands for the low-pressure pipe interface. These interfaces on car air conditioning pipes are used to distinguish the pipes during air conditioning maintenance. Normally, they are tightly screwed to prevent dust from entering or adhering. The functions of the car air conditioning system include: 1. Controlling the temperature inside the car to provide a comfortable environment for drivers and passengers; 2. Drawing in fresh air for ventilation; 3. Removing moisture from the car to achieve air circulation between the inside and outside of the vehicle; 4. Filtering dust and impurities from the air to purify the car's interior environment.
9
3
Share

How to set the automatic locking for the Leiling car?

The automatic locking of the Leiling car cannot be set independently; it is preset by the manufacturer. When the speed reaches 10 to 20 km/h, the vehicle's automatic locking function activates. The automatic locking while driving, also known as speed-sensing automatic locking, is an electronic device that automatically presses the door lock button when the vehicle reaches the speed set by the computer, preventing accidental opening of the door. The Leiling has a length, width, and height of 4640mm, 1780mm, and 1455mm respectively, with a wheelbase of 2700mm. It is equipped with a 1.2T turbocharged engine paired with a CVT continuously variable transmission. This engine delivers a maximum power of 85kW and a maximum torque of 185Nm.
6
3
Share

What does ECU mean in a car?

ECU in a car refers to the onboard computer. The ECU (Electronic Control Unit), also known as the vehicle computer or onboard computer, is essentially a specialized microcomputer controller for automobiles. Like a regular computer, it consists of a microprocessor, memory, input/output interfaces, analog-to-digital converters, as well as shaping and driving circuits, all made up of large-scale integrated circuits. The ECU typically operates within a voltage range of 6.5 to 16V, a working current of 0.015 to 0.1A, and a temperature range of -40 to 80 degrees Celsius. It can withstand vibrations below 1000Hz, making the probability of ECU failure very low. Within the ECU, the CPU is the core component, responsible for computation and control functions. When the engine is running, the ECU collects signals from various sensors, performs calculations, and converts the results into control signals to manage the operation of controlled components.
15
0
Share

How to Confirm Car Locking with Keyless Entry?

Methods to confirm car locking with keyless entry: 1. When the locking sound is heard, the turn signal will flash once. For models with automatic folding mirrors, the mirrors will fold automatically; 2. The lock warning light on the door will flash; 3. Currently, most cars have keyless entry sensing areas only on the two front doors and the trunk, so you can pull the rear door to confirm. Functions of the car remote key: 1. Some red buttons may have a horn symbol or the word "Panic" printed on them. This is the car-finding button, which makes the vehicle emit a sound and flash lights to help the owner locate the car quickly; 2. The car key has a trunk opening button. Simply press the trunk unlock button, and the trunk will pop open automatically.
6
0
Share

How to Adjust the Rearview Mirror of a Volkswagen Car?

Method for adjusting the rearview mirror of a Volkswagen car: First, turn the knob to position L to adjust the left exterior rearview mirror. When adjusting the left exterior rearview mirror, the right exterior rearview mirror will adjust simultaneously. If needed, turn the knob to position R to correct the position of the right exterior rearview mirror. Finally, adjust the interior rearview mirror. Key adjustment points: place the distant horizontal line in the center of the interior rearview mirror, then move it left or right so that the image of your right ear is just at the left edge of the mirror. Volkswagen models include the Lavida, Tayron, Magotan, T-Roc, and Sagitar. Among them, the Volkswagen Lavida has a body length, width, and height of 4670mm, 1806mm, and 1474mm respectively, with a wheelbase of 2688mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission. The maximum power of this engine is 110kW, and the maximum torque is 250Nm.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.