···
Log in / Register

What is the speed rating marked on the tire?

4 Answers
SimonFitz
08/26/25 4:01am

Different tires will have English letters on the sidewall to indicate the speed rating of the tire. It represents the certified speed rating of the tire from 4.8 km/h to 300 km/h. The following is an introduction to relevant knowledge about tires: 1. Definition: The tire speed rating refers to the maximum speed at which the tire can carry the specified load under specified conditions. Generally, different tires will have English letters on the sidewall to indicate the speed rating. 2. Tire selection: Many internationally renowned car brands use American Goodyear tires, the advantage being excellent tire grip, but the disadvantage is that the tires are not wear-resistant and are expensive. For Chinese road conditions, French Michelin tires are quite good, with soft rubber texture, making them very noise-resistant, but the disadvantage is that the tires are not wear-resistant and may not withstand bumpy roads.

Was this review help?
20
5
Share
Jeanette
09/08/25 5:01am

The speed rating marked on tires is actually quite important. As an experienced driver with over a decade behind the wheel, those letters on the tire sidewall indicate the maximum safe speed. For example, H represents 210 km/h, while V stands for 240 km/h. Common models vary - compact cars mostly use H or V, while sports cars may go up to W or Y. I remember once driving at 220 km/h on the highway with V-rated tires, and it felt rock-solid. If I had used lower-rated tires, it could have been dangerous. My advice is to always check your vehicle's original standard code when selecting tires and avoid downgrading to lower speed ratings. Exceeding speed limits on highways with underrated tires increases the risk of blowouts, and skidding could be disastrous. Also, regularly inspect your tires for wear and aging to ensure these speed rating letters remain clearly visible.

Was this review help?
20
3
Share
Expand All
OJesse
10/22/25 5:05am

The speed rating is indicated by those capital letters on the sidewall of the tire, such as S representing 180 km/h, T for 190, H for 210, and V for 240. As an ordinary car owner, I always pay attention to this when getting new tires because the speed rating set by the manufacturer matches the vehicle's performance. When checking it myself, I squat down to look at the tire edge, find a string of alphanumeric characters, and the location is easy to spot. If the letter is V or higher, it means safer high-speed driving; but if the tire is aged or the rating is too low, like buying cheap tires marked only with an S rating, driving too fast can cause the tire to overheat and burst. So I suggest not going for the cheapest option when buying tires, but choosing the standard matching rating. For daily driving, 180 km/h is sufficient—safety first.

Was this review help?
7
1
Share
Expand All
OCorey
12/05/25 5:28am

Tire speed ratings are indicated by letters, such as H-rated for 210 km/h. Exceeding this limit is dangerous. From a driver's safety perspective: lower-rated tires significantly increase the risk of blowouts at high speeds, potentially leading to loss of control and accidents. When selecting tires, check the letter rating to ensure compatibility with your vehicle's speed capabilities.

Was this review help?
1
5
Share
Expand All
More Forum Discussions

Where should the ETC be installed?

The ETC is generally installed on the upper middle part of the front windshield for regular vehicles, while for large vehicles like trucks and buses, it is installed on the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with anti-explosion film or those that have been retrofitted with anti-explosion film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave sunroof strip. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, the vehicle owner needs to provide original and photocopies of their valid ID card and vehicle license. If the application is handled by someone other than the owner, the agent's valid ID card is also required. The photocopy of the vehicle license should include the page with the most recent annual inspection stamp. A bank card for deducting highway tolls is also needed, and the vehicle must be registered under the name of an individual aged between 18 and 60. For company vehicles, the required documents include: An introduction letter from the vehicle owner (with official seal); photocopy of the organization code certificate or business license (with official seal); original ID card of the agent; original vehicle license; and the vehicle that needs to have ETC installed. Here are some precautions for installing ETC: Do not obstruct the view. It is best to install it behind the rearview mirror: Many car models have windshields with a large rearward tilt angle, which reduces the driver's field of vision. If this is not considered during ETC installation, it can increase the driver's blind spots. Installing it behind the rearview mirror on the right side can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Once installed, do not remove it casually: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed, the windshield will press the anti-removal lever in. If the tag is removed casually, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing area is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic toll deduction for the wrong vehicle. The ETC lane recognition speed is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information, leading to toll deduction failure. When using a debit card linked to ETC, insufficient balance may also cause toll deduction failure.
1
1
Share

Is the Touareg imported or domestically produced?

The Touareg is a domestically produced SUV, a mid-size SUV jointly manufactured by Volkswagen and SAIC. In terms of exterior design, the SAIC Volkswagen Touareg draws heavily from the CrossBlue concept car, giving it a very imposing overall appearance. For details, the new vehicle features a double-bar chrome-plated horizontal grille that extends directly into the headlights. In terms of dimensions, the new vehicle measures 5039mm in length, 1989mm in width, and 1773mm in height, with a wheelbase of 2980mm. For the interior, the SAIC Volkswagen Touareg utilizes very straight-line design elements, also inspired by the CrossBlue concept car.
15
2
Share

What causes car shaking when pressing the accelerator deeply?

The reasons for car shaking when pressing the accelerator deeply are: 1. Ignition system: Spark plug issues, which could be due to expired lifespan or excessive carbon buildup. The solution is to replace the spark plugs; 2. Intake system: A dirty throttle body or oxygen sensor, which can lead to an improper air-fuel mixture ratio, naturally causing shaking. The solution is to clean the dirty parts; 3. Fuel system: Common causes include injector failure, fuel pump issues, or clogged fuel filters. The accelerator, also known as the 'throttle' or 'gas pedal', is the control device that regulates engine power (thrust). In piston aircraft engines, the throttle controls the carburetor's throttle opening to adjust cylinder filling, thereby determining the engine's output power.
13
4
Share

What is the normal RPM for an automatic transmission?

Automatic transmission normally operates at around 1800 to 2000 RPM. The prerequisite for upshifting is acceleration, while the prerequisite for downshifting is deceleration. Higher gears are more fuel-efficient, but this doesn't necessarily mean higher speeds. Lower gears can also operate at high speeds, providing strong power for climbing hills, though they consume more fuel. Whenever road conditions permit, it's advisable to use higher gears. An automatic transmission typically refers to a car's automatic gear-shifting mechanism, where the transmission control system automatically selects the appropriate gear based on engine speed and load, replacing the driver's subjective judgment and manual shifting operations. Most automatic transmission cars have six gear positions, arranged from top to bottom as: P, R, N, D, S, L.
9
5
Share

What does the BYD Qin EV function restriction mean?

BYD Qin EV function restriction generally indicates damage to the vehicle's high-voltage system. Below are the relevant details: 1. Handling EV function restriction: When the car displays an EV function restriction, it is essential to promptly take it to a repair shop or 4S dealership for professional maintenance to avoid unnecessary issues during vehicle use. 2. Detailed introduction to EV: EV is the English abbreviation for electric vehicles. On hybrid vehicles, the full name of EV is HEV, which stands for hybrid electric vehicle. Hybrid power means the car uses both gasoline and electric power as driving methods. The advantage is that when the vehicle starts or stops, it relies solely on the generator. The engine does not work until a certain speed is reached. Therefore, the engine can always maintain optimal working conditions, with good power performance and very low emissions. Moreover, the source of electrical energy is the engine.
18
0
Share

Which gear to start with?

1st gear start. Generally, cars have five forward gears and one reverse gear, which are 1st gear, 2nd gear, 3rd gear, 4th gear, and 5th gear. Starting is usually done in 1st gear. Unlike automatic transmissions, manual transmissions require stepping on the clutch when shifting gears. 1. Walk around the car once before getting in, check the tire pressure, and look under the car for small animals. Check the surroundings of the vehicle. 2. After getting in the car, fasten the seat belt, adjust the seat, and adjust the left and right mirrors and rearview mirror. 3. Make sure the gear is in the neutral position, the handbrake is engaged, and press the clutch and brake with both feet. (If the clutch and brake are not pressed and the gear is not in neutral, the car will either lurch forward or stall immediately when starting the engine.)
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.