···
Log in / Register

What is the speed limit when visibility is less than 50 meters in foggy conditions?

4 Answers
VonAshlyn
07/28/25 2:15pm
200 meters. Visibility is an indicator that reflects atmospheric transparency, defined in the aviation industry as the maximum distance at which a person with normal vision can clearly discern the outline of a target under current weather conditions. Visibility is closely related to the prevailing weather conditions. Below is additional information: Safe following distance: Safe following distance refers to the necessary gap that a following vehicle maintains with the vehicle ahead to avoid accidental collisions while driving. There is no absolute numerical concept for a safe distance; it depends on the specific situation. Generally speaking, the faster the speed and the heavier the vehicle, the longer the required safe following distance.
Was this review help?
11
0
Share
KyleMarie
08/11/25 6:46pm
When driving in fog with visibility dropping below 50 meters, I always reduce my speed to under 20 km/h. After all, with everything so hazy and unclear, reaction time is shortened, and driving too fast makes rear-end collisions or loss of control especially likely. The first thing I do is turn on the fog lights and hazard lights to alert vehicles behind me. On the highway, I stick to the far-right lane and creep along slowly, always ready to stop. I often remind my novice driver friends that it's best to avoid going out in such weather, but if absolutely necessary, drive at low speeds—safety first is the golden rule. Remember to maintain a following distance of at least 50 meters; with blurred vision in foggy conditions, braking early is crucial. Don't take risks just to save time. Drive steadily—preserving your life is what matters most.
Was this review help?
7
0
Share
Expand All
DeIker
09/29/25 3:17am
As a seasoned driver with over a decade of experience, I'm extra cautious when driving in foggy conditions. Once visibility drops below 50 meters, I immediately reduce my speed to 20 km/h or lower, avoiding overtaking and sudden acceleration. I turn on fog lights and hazard lights, keep to the right lane on highways, focus my eyes on the road ahead, and stay alert to sounds. Driving in fog is like walking blindfolded – speeding can lead to accidents in minutes. I've seen too many crashes caused by speeding, so I stick to slow driving, remain vigilant, and avoid phone use or distractions. I ensure the brake system is checked to prevent skidding, maintain a safe distance of at least two car lengths, and guarantee a stable stop in emergencies.
Was this review help?
14
1
Share
Expand All
AustinLynn
11/12/25 5:13am
Driving in fog requires pragmatism. Having driven through countless fog seasons, when visibility drops below 50 meters, I reduce speed to around 20 km/h. There's good reason for this legal requirement – low speed gives you sufficient time to react to emergencies. With headlights and hazard lights on, avoid lane changes or overtaking when visibility is poor; stick close to the roadside. Maintain a following distance of at least 50 meters – don't assume proximity is safe, as nothing is certain in fog. Stay calm while driving; some soothing music can help relieve stress, but maintaining focus is paramount.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

Can You Turn Right on a Red Light?

You cannot turn right on a red light. For more details, please see below: Cases where you can turn right: At circular traffic lights, you can turn right directly on a red, green, or yellow light, but you need to observe the road conditions. When the red light is on, right-turning vehicles can proceed if they do not hinder the passage of released vehicles or pedestrians. If caught by an electronic eye for not yielding to pedestrians, you will be penalized with 3 points. Therefore, to avoid penalties, you must yield to pedestrians when turning right. Cases where you cannot turn right: When all lanes on the road are straight lanes, you cannot turn right. Otherwise, it will be considered as not driving in the designated lane or violating the no-turn markings, with specific penalties determined by local traffic police. At intersections marked with 'No Right Turn on Red' or when the arrow light is red, you cannot turn right. If there is a 'No Right Turn' sign on the road, turning right is also prohibited and constitutes a violation of the no-turn sign or markings.
20
3
Share

What is the matching method for the 2006 Polo electric power steering?

Polo electric power steering requires a computer for matching. It is recommended to visit an authorized car 4S store and use specialized equipment for matching. Generally, professional technicians can complete the process in about ten minutes. Below is an introduction to the Electric Power Steering (EPS) system: 1. Introduction: The Electric Power Steering (EPS) system is a power steering system that directly relies on an electric motor to provide auxiliary torque. Compared with traditional Hydraulic Power Steering (HPS) systems, the EPS system has many advantages. The EPS mainly consists of a torque sensor, vehicle speed sensor, electric motor, reduction mechanism, and Electronic Control Unit (ECU). 2. Operation: When the driver turns the steering wheel, the torque sensor detects the steering direction and torque magnitude, sending voltage signals to the ECU. Based on the torque voltage signals, steering direction, and vehicle speed signals detected by the torque sensor, the ECU sends commands to the motor controller, enabling the motor to output steering assist torque of corresponding magnitude and direction, thereby generating auxiliary power. When the vehicle is not steering, the ECU does not send commands to the motor controller, and the motor remains inactive.
18
4
Share

What Causes a Car to Stall Suddenly After Starting?

There are several reasons why a car may stall shortly after starting, including severe engine carbon buildup, issues with the car's anti-theft system, ignition switch failure, or low fuel system pressure. Here are the details: 1. Severe engine carbon buildup: When there is excessive carbon buildup in the engine, fuel cannot burn effectively in the cylinders, leading to stalling after starting. In this case, the engine carbon needs to be cleaned promptly. 2. Activation of the anti-theft system: If the car's anti-theft system is triggered, the engine may start but fail to operate normally, causing the car to stall after starting. This issue commonly occurs after replacing the car key or its battery, so it's essential to reprogram the key after such changes. 3. Ignition switch failure: A faulty ignition switch can cause the car to stall after starting and trigger the malfunction indicator light. This is a complex issue that requires professional inspection and repair at a car service center or 4S shop. 4. Low fuel system pressure: Insufficient fuel system pressure prevents effective fuel combustion, necessitating a thorough inspection of the fuel system.
18
0
Share

What to Do When the Outside of the Windshield Has Fog That Won't Wipe Off?

If the fog on the outside of the windshield cannot be removed, you can use a defroster or open the window to expel the moisture. Below is an introduction to car windshields: 1. Introduction: The development of modern car exteriors is closely related to advancements in glass technology. Over 40 years ago, car windshields began using single-piece curved glass, gradually replacing flat windshields. 2. Function: Laminated glass involves bonding a transparent adhesive plastic film between two or three layers of glass, combining the toughness of plastic with the hardness of glass to enhance the glass's resistance to breakage. Tempered glass is made by quenching ordinary glass to create internal stresses, thereby strengthening the glass. When impacted, it breaks into small, blunt-edged pieces, reducing the risk of injury to passengers. Zone-tempered glass is a new variety of tempered glass that undergoes special treatment to maintain some clarity when cracked upon impact, ensuring the driver's field of vision remains unaffected. Currently, car windshields primarily use laminated tempered glass and laminated zone-tempered glass, which can withstand strong impacts.
20
3
Share

Why does the brake pedal automatically rebound when pressed all the way down?

The reason the brake pedal automatically rebounds when pressed all the way down is due to the ABS system functioning as a safeguard. Here are the specific details: ABS functioning as a safeguard: When you press the brake pedal hard and it rebounds or pulsates, it indicates that the ABS is working as a safeguard during emergency braking. Origin of the ABS anti-lock braking system: In emergency situations, drivers may slam on the brakes to control speed and prevent danger. However, when the braking system suddenly locks the wheels, it can cause the vehicle to lose lateral control. Moreover, continuously locking the brakes is not the most effective way to quickly reduce speed. Hence, the anti-lock braking system was developed. Specific function of the ABS anti-lock braking system: When the driver presses the brake pedal hard, the sensing device will repeatedly open and close the brake fluid circuit to prevent wheel lock-up and the resulting lateral deviation. At the same time, this enhances the most effective and safe stopping within a short distance. Therefore, the pulsation of the brake pedal is caused by the rapid opening and closing of the brake fluid circuit, which is a normal phenomenon.
16
0
Share

What materials should be brought for the first car maintenance?

The items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle license; vehicle registration book; vehicle purchase invoice. Bring these to the designated first maintenance facility for the vehicle. Important note: Make an appointment with the 4S store in advance. The first maintenance refers to the initial service after a new car has been driven. The specific time varies by vehicle, typically after driving 5,000 kilometers or 6 months. It is essential to attend the first maintenance promptly, neither early nor delayed. The completion of the first maintenance marks the end of the car's break-in period, allowing it to be driven under standard load and normal speed as required by the vehicle. The timing of the first maintenance is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever indicator is met first will be the standard. The first maintenance items include: changing the engine oil and oil filter, cleaning the air filter, checking various fluid levels, inspecting the generator belt and wiper blades for damage, checking tire pressure and for any damage or bulges. Time required: Completing all tasks takes approximately 2 hours. The most critical aspect of the first maintenance for a new car is changing the engine oil and oil filter. When changing the oil, the oil filter must also be replaced. The choice of oil must refer to the "Vehicle User Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car body with water: Many people clean their cars during holidays, using water to rinse the exterior and wiping with a cloth. It is important to note that the interior of the car body should not be directly rinsed with water. If the floor mats are dirty, use a vacuum cleaner or remove them to clean with a brush and detergent, then dry before replacing. The rubber mats on the floor of the cabin have many drainage holes underneath. If water enters, it will not dry but flow through these holes to components like the gearbox, causing erosion and corrosion. The best practice is to use a vacuum cleaner for cleaning, followed by wiping with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: If the car's antifreeze is low, it is recommended to drain the existing antifreeze and refill it with the same brand. Different brands of antifreeze have varying chemical properties and use different corrosion inhibitors. Mixing them may lead to unnecessary issues. Do not lubricate tire bolts and nuts: When bolts on a car become rusty, some may apply oil to make them functional again. However, lubricating the bolts and nuts on wheels can pose safety risks. At high speeds, the bolts and nuts may loosen or even fall off, leading to driving hazards.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.