What is the speed limit when visibility is less than 100 meters?

2 Answers
OGrace
07/29/25 8:08am
When visibility is less than 100 meters, the vehicle speed must not exceed 40 kilometers per hour, and a distance of more than 50 meters should be maintained from the vehicle ahead. Turn on the fog lights, low beam lights, position lights, and front and rear position lights. When motor vehicles are driving on the road and encounter low-visibility weather conditions such as fog, rain, snow, dust, or hail, the road management department should issue speed limits, safe distance reminders, and other information through displays. A safe distance refers to the necessary gap that a following vehicle maintains from the vehicle ahead to avoid accidental collisions. When driving on the road under low-visibility weather conditions such as fog, rain, snow, dust, or hail, the following regulations must be observed: When visibility is less than 500 meters but greater than 200 meters, the low beam lights, width indicator lights, and rear fog lights must be turned on; the speed must not exceed 80 km/h; maintain a driving distance of more than 150 meters. When visibility is less than 100 meters, turn on the fog lights, low beam lights, position lights, front and rear position lights, and hazard warning flashers. The speed must not exceed 40 kilometers per hour, and a distance of more than 50 meters should be maintained from the vehicle ahead in the same lane. When visibility is less than 50 meters, turn on the fog lights, low beam lights, position lights, front and rear position lights, and hazard warning flashers. The speed must not exceed 20 kilometers per hour. If on a highway, exit at the nearest exit as soon as possible. Precautions for driving in foggy conditions: Make good use of lights. When driving in foggy conditions with low visibility, fog lights and position lights must be turned on, and high beams are prohibited. High beams shine upward, and the light is diffusely reflected by the fog, creating a white haze in front of the car, which affects driving. Fog lights have high light penetration, and turning them on makes the vehicle clearly visible to others. Maintain a safe distance from the vehicle ahead. Do not follow too closely, and avoid unnecessary overtaking. This prevents insufficient reaction time in case of an accident, which could lead to rear-end collisions. Frequently use the horn to indicate your position.
Was this review help?
12
3
Share
LaRichard
08/12/25 11:20am
I remember the first time I drove in thick fog, visibility was less than 100 meters, and the road was completely white, making it impossible to see distant vehicles clearly. At that time, the speed had to be kept under 40 kilometers per hour, which is a basic safety rule. Under such conditions, the range of vision is short, and reaction time is extremely limited. Once, I wasn’t paying attention and drove a bit faster, almost rear-ending the car in front—fortunately, I braked in time. Since then, I always remind myself to slow down below 40 in foggy conditions, not just for my own safety but also to avoid causing trouble for others. It’s best to turn on the fog lights, maintain a safe distance, and not take risks just to save time. These experiences have made me appreciate safe driving habits even more, and developing a routine of regular vehicle checks can reduce the risk of accidents. In bad weather, patience is the greatest safeguard—don’t let impulsiveness affect your judgment.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What is the speed limit for 92v tires?

92v tires have a maximum speed limit of 240km/h. Meaning of 92v: 92 is the load index, and v is the speed rating. The load index indicates the maximum weight the tire can bear; specifically, 92 means the tire can bear a maximum weight of 630 kilograms. Generally, the higher the speed rating of a tire, the stronger its grip, but it also tends to wear out more easily. Typically, v-rated tires wear out faster than h-rated tires. Introduction to tires: Tires are a crucial component of a car, affecting both driving stability and safety. There is a lot of important information on the sidewall of a tire, such as the load index, speed rating, production date, recommended tire pressure, size specifications, etc. During regular use, it's important to frequently check the tire pressure and inspect the tire surface for any signs of damage.
1
1
Share

How to Attach the Compulsory Insurance Sticker?

Compulsory insurance stickers should be affixed as follows: According to relevant regulations, the compulsory traffic insurance sticker must be attached to the upper right corner of the front windshield. Relevant information about compulsory insurance is as follows: 1. Introduction: The full name of compulsory insurance is "Compulsory Motor Vehicle Traffic Accident Liability Insurance." It is a mandatory liability insurance where the insurance company compensates for personal injuries, deaths, and property losses (excluding the vehicle's occupants and the insured) caused by road traffic accidents involving the insured vehicle, within the liability limits. 2. Necessity: Compulsory insurance ensures compensation for victims of motor vehicle traffic accidents and promotes road traffic safety. It provides timely and basic protection for traffic accident victims.
18
3
Share

Where is the VIN located on the new Cayenne?

The VIN of the new Cayenne can be found on the engine hood, specifically in the lower left corner inside the windshield. VIN structure: There are mainly two formats for Vehicle Identification Numbers. The first is the ISO3779 standard adopted by the European Union, while the second standard is primarily used in North America, which is more stringent than the first but remains compatible with it. VIN plate location: The plate should be fixed on the door hinge pillar, door lock pillar, or one of the door edge pillars connected to the door lock pillar, near the driver's seat. If such a location is not available, it should be fixed on the left side of the dashboard. If that is also not possible, it should be fixed on the inner side of the door near the driver's seat. If none of the above locations can be used, a written application must be submitted to NHTSA.
8
0
Share

What are the components of a braking system?

Braking systems primarily consist of four parts: the energy supply device, control device, transmission device, and brake. Functions of the braking system: The main functions of the braking system are to decelerate or even stop a moving vehicle, maintain a stable speed for a vehicle going downhill, and keep a stationary vehicle from moving. It is a series of specialized devices designed to forcibly reduce the vehicle's speed. Structure of a typical braking system: It mainly consists of wheel brakes and hydraulic or pneumatic transmission mechanisms. The wheel brake is primarily composed of rotating parts, fixed parts, and an adjustment mechanism. The rotating part is the brake drum; the fixed parts include the brake shoe and brake backing plate; the adjustment mechanism consists of an eccentric support pin and an adjustment cam used to adjust the shoe-to-drum clearance. The hydraulic brake transmission mechanism mainly includes the brake pedal, push rod, master cylinder, wheel cylinder, and piping. The pneumatic brake transmission mechanism mainly consists of the brake pedal, push rod, brake valve, air dryer, four-circuit protection valve, brake chamber, and piping.
2
2
Share

Is the Volkswagen Car Key Waterproof?

Volkswagen car keys are designed with daily water resistance but are not waterproof for diving. Although the exterior of car remote keys is generally made of waterproof materials, there are gaps between the keys and circuit boards inside. Therefore, the key should not be submerged in water as this could damage the internal components. Here are some methods to handle a wet car key: 1. Do not press any buttons immediately after the key gets wet, as this may allow moisture to penetrate deeper. 2. Dry the surface of the key, open the casing, remove the battery, and use highly absorbent paper towels to wipe the internal components. 3. Use a hair dryer on the cool setting to dry the key; avoid using hot air as the circuit board inside should not be overheated. 4. Gently wipe the internal button contacts and other parts with high-concentration alcohol, let it dry, and then reinstall the battery.
1
1
Share

What Causes the Squeaking Sound When a Corolla Turns?

There are several reasons why a Corolla may produce a squeaking sound when turning: Foreign Object Accumulation: Excessive accumulation of foreign objects on the fender liners or sound insulation pads of the front wheels. When the car turns, the tires interfere with these objects, resulting in abnormal noises. Cleaning the fender liners will eliminate the tire noise. Loose Screws: Screws securing the fender liners or sound insulation pads may come loose, causing the liners or pads to lift. During turns, the front wheels interfere with them, creating friction and noise. It is necessary to inspect the fastening condition of the fender liners and sound insulation pads and address any looseness or lifting issues. Unauthorized Modifications: Unauthorized modifications to the car tires, such as replacing them with non-original size tires (e.g., widening the tires or increasing their diameter). When the car turns, the tires may interfere with the body at certain positions, producing noise. This poses a significant safety hazard, and the tires should be replaced with original-size ones.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.