What is the speed limit when visibility is 50 meters in rainy and foggy weather?

What is the actual fuel consumption of the Auman GTL460 automatic transmission?

The actual fuel consumption of the Auman GTL460 automatic transmission is around 32 liters per 100 kilometers. Here are specific methods to reduce fuel consumption: 1. The vehicle consumes the most fuel during low-speed acceleration, so gently pressing the accelerator pedal during startup and avoiding excessively high RPM can effectively reduce fuel consumption. 2. Avoid unnecessary high RPM as much as possible, as fluctuating engine speeds can significantly increase fuel consumption. 3. Perform regular maintenance, including oil changes and carbon deposit cleaning. 4. Try to avoid emergency braking. Anticipating road conditions in advance not only improves driving safety but also saves fuel, such as gradually slowing down before traffic lights and utilizing inertia to coast.

17

0

Share

Why is the reversing radar of Besturn X80 not beeping?

The reasons why the reversing radar of Besturn X80 is not beeping are as follows: 1. The reversing radar switch is turned off: There is usually a switch controlling the reversing radar on the central control panel inside the car. If it is turned off, the reversing radar will not work. Turn on the reversing radar switch; check if the two wires under the reversing switch have normal power supply. 2. Faulty reversing radar circuit: When the reversing radar circuit is aged or broken, the reversing radar will not function properly. 3. Damaged reversing radar: If the above issues are all ruled out, it is highly likely that components such as the reversing radar, controller, or alarm are damaged.

11

4

Share

Can a Car Be Locked Without Turning Off the Engine?

When the vehicle is not turned off, it cannot be locked. Even if some car models can lock the doors without turning off the engine, they will automatically shut down after locking. The reasons why a vehicle cannot be locked without turning off the engine are as follows: 1. This is for safety considerations. After parking, if the vehicle remains in one position for a long time, the accumulation of exhaust gases may enter the car through the air intake (since the vehicle is not completely sealed, even with the internal circulation turned on, it is unavoidable). 2. If someone is locked inside the car, inhaling the exhaust gases may lead to carbon monoxide poisoning.

18

0

Share

How to Release the Parking Brake?

Under the premise of fastening the seat belt and closing the car door, simply press the "AUTOHOLD" button or the button with "A" when needed, and step on the brake when parking to activate the parking brake. When starting off, shift gears, release the clutch while stepping on the accelerator, and the auto-hold function will be automatically released. In principle, for short waiting periods, the auto-hold function is controlled by the ESP unit to apply braking. More details are as follows: 1. The parking brake, commonly known as the handbrake, provides resistance to the car when parked to prevent it from rolling. 2. The parking brake, also referred to as the handbrake or the parking gear in automatic transmissions, locks the drive shaft or rear wheels. The force of the parking brake is much less than that of the service brake, just enough to prevent the car from rolling on a slope.

13

4

Share

What Are the Causes of Chassis Abnormal Noises?

Abnormal noises can be caused by worn brake pads, loose chassis components, aging rubber parts in the chassis, or lower arm failures, among other reasons. Here is more information about the chassis: 1. A car is a product of mechanical structure, and the chassis is one of the parts that directly contact the ground. It also serves as a structural component that isolates and transforms vibrations between the occupants and the road surface. 2. There are numerous parts in the vehicle chassis, and their quality and coordination directly affect the chassis's ability to absorb vibrations. As for abnormal noises, they are related to the aging performance of the rubber bushings in the vehicle chassis. The rubber bushings in a car are used in the moving parts of the chassis and serve as the final barrier for vibration isolation between these parts and the rigid body of the car.

8

0

Share

Where is the door drain outlet of BYD Song Pro?

The door drain outlets of BYD Song Pro are generally located in areas such as the fuel tank cap, engine compartment, under the door panels, and sunroof. More details about BYD Song Pro are as follows: 1. BYD Song Pro is a "Global Intelligent Large Five-Seat SUV" under BYD, available in three different drive forms: fuel-powered (Song Pro Fuel), plug-in hybrid (Song Pro-DM), and pure electric (Song Pro-EV). 2. The wheelbase of Song Pro Fuel reaches 2712mm, with body dimensions of 4650mm × 1860mm × 1700mm. 3. The fuel version of Song Pro is equipped with a 1.5TI engine + 6-speed automatic transmission, with maximum power increased to 118kW and maximum torque increased to 245N·m.

2

Share

What is the speed limit when visibility is 50 meters in rainy and foggy weather?

What is the actual fuel consumption of the Auman GTL460 automatic transmission?

Why is the reversing radar of Besturn X80 not beeping?

Can a Car Be Locked Without Turning Off the Engine?

How to Release the Parking Brake?

What Are the Causes of Chassis Abnormal Noises?

Where is the door drain outlet of BYD Song Pro?

What to Do When a Car Stalls After Driving Through Water

How to Switch Between the Three Driving Modes of the Camry?

How to turn on the air conditioning cold air in Changan CS35?

How to Repair Peeling Steering Wheel?