What is the speed limit when passing through traffic lights?

1 Answers
Gomez
07/29/25 2:43pm
New traffic regulations do not explicitly specify the maximum speed when passing through intersections. When crossing traffic lights, the speed should not exceed the speed limit of that road section. Here are some precautions for crossing traffic lights: Follow traffic signals: Drive according to the green and red light signals, do not run red lights, and avoid violating traffic rules. Look both ways: Even when driving according to the signals, always look left and right to prevent collisions with illegally moving vehicles and avoid traffic accidents. Wait in order: During a red light, wait in the designated waiting area and avoid vehicle turning lanes. Pay attention to vehicles ahead: Be mindful of the vehicles in front, and proceed orderly through the traffic lights after the leading vehicle starts moving to prevent congestion and traffic jams.
Was this review help?
15
3
Share
More Forum Discussions

Is the Beijing-Harbin Expressway from Changchun to Harbin Open?

Yes, the Beijing-Harbin Expressway from Changchun to Harbin is open. The Beijing-Harbin Expressway began construction in September 1996 and was fully completed on September 15, 2000. The expressway passes through cities such as Beijing, Tangshan, Qinhuangdao, Huludao, Jinzhou, Panjin, Anshan, Shenyang, Tieling, Siping, Changchun, and Harbin. The Beijing-Harbin Expressway is a national expressway with the network number G1, connecting China's capital Beijing to Harbin in Heilongjiang Province, with a total length of 1,200.6 kilometers. The Beijing-Harbin National Expressway consists of the Beijing-Shenyang Expressway and the Shenyang-Harbin Expressway.
4
0
Share

What Are the Reasons for Difficulty in Shifting Gears in Automatic Transmission Cars?

Automatic transmission cars may experience difficulty in shifting gears due to the following reasons: 1. Operational factors: Incorrect timing or method of shifting; 2. Clutch factors: The clutch pedal is not fully depressed, failing to disengage the transmission gears; 3. Transmission factors: Insufficient transmission oil, leading to reduced lubrication effectiveness. The steps to start an automatic transmission car are: 1. Insert the key and turn it to the second ignition position (power mode), then wait for the system self-check to complete; 2. Shift the gear lever from P (Park) to N (Neutral); 3. Release the brake and start the car's engine; 4. Press the brake pedal with your foot, shift the gear lever from N to D (Drive), release the brake, and press the accelerator to start moving. Automatic transmission gears include P (Park), R (Reverse), N (Neutral), D (Drive), L (Low), and S (Sport). Characteristics of automatic transmission cars include: 1. Easy to operate, simple to learn, and easy to master driving techniques; 2. High driving comfort with relatively smooth gear shifting; 3. High safety factor, reducing driver fatigue.
2
3
Share

Can Toothpaste Repair Car Scratches the Next Day?

Using toothpaste to remove car scratches the next day cannot repair the scratches. Toothpaste can help eliminate minor scratches to some extent because it contains abrasives, which give it a function similar to car wax, reducing the appearance of scratches. Drawbacks of Using Toothpaste for Scratches: Additionally, toothpaste can act as a simple barrier, preventing rust in the short term, especially for cars with white paint, where the effect is more noticeable. However, using toothpaste to remove scratches on car paint is not a long-term solution. For example, during heavy rain, the toothpaste will naturally wash away. Moreover, this method is more suitable for light-colored car paint; using it on dark-colored paint may cause the treated area to turn white, producing the opposite effect. Methods to Remove Scratches: To remove scratches, you can use a touch-up pen or a car paint scratch repair agent. However, for deep scratches—meaning the scratch area is large and has damaged the primer—it is recommended to visit a professional auto repair shop for restoration.
17
1
Share

What are the reasons for unstable idle speed fluctuating between high and low?

The reasons for unstable idle speed fluctuating between high and low are: 1. Excessive carbon buildup in the throttle body; 2. Leakage in the intake manifold or various valves; 3. Engine misfire (cylinder not firing); 4. Fuel system malfunctions, including clogged fuel injectors, clogged fuel filter, clogged fuel pump screen, faulty fuel pressure regulator, and clogged fuel return line; 5. Ignition system failures, including faulty ignition module, incorrect spark plug gap, eroded or damaged spark plug electrodes, and excessive resistance in high-voltage wires. If a car exhibits unstable idle speed fluctuating between high and low, it should be addressed promptly; otherwise, both fuel economy and environmental performance will deteriorate.
7
4
Share

How to Check the National Emission Standard on the Vehicle License?

Methods to check the national emission standard on the vehicle license: 1. Look at the vehicle's environmental protection label, which has a clear mark on the back; 2. For new vehicles, you can check the vehicle's factory certificate or the vehicle conformity certificate; 3. You can log in to the public inquiry platform of the Motor Vehicle Environmental Protection Website, enter the vehicle's VIN number and the last 6 digits of the engine number to query the vehicle information. If the vehicle meets the National V emission standard, the implementation of the National VI standard will not affect its normal use on the road, as vehicles already sold are subject to the emission standards at the time of sale. Therefore, as long as the National V vehicle is in good condition, it can continue to be driven.
8
0
Share

What does it mean to violate the prohibition line instruction?

Violating the prohibition line instruction refers to driving against the prohibited traffic markings, which include solid yellow lines (indicating no crossing of the central divider) and yellow crosses (indicating no parking). Driving over these markings constitutes a violation. Examples include changing lanes over solid lines, making U-turns in no-U-turn zones, or turning left in no-left-turn sections—all of which are considered violations of prohibition line instructions. According to the Road Traffic Safety Law, driving past the stop line during a red light and continuing to proceed is classified as running a red light. If a vehicle crosses the stop line during a red light but stops within the stop line or intersection, it is categorized as stopping beyond the stop line at a signalized intersection (over-line stopping).
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.