What is the speed limit when crossing an intersection?

3 Answers
DelHarrison
07/28/25 3:24pm
When passing through an unsignalized intersection without speed limit signs, the maximum driving speed should not exceed 30 kilometers per hour, with tractors, electric vehicles, and wheeled special machinery vehicles not exceeding 15 kilometers per hour. It is advisable to slow down and yield to pedestrians. This approach ensures greater safety when encountering intersections. Content introduction: Content 1: When approaching an intersection, you should slow down in advance, observe the road, and then pass through at a relatively low speed. Content 2: When crossing an intersection at night, remember to switch from high beams to low beams. Content 3: Pay attention to the movements of pedestrians and anticipate their actions in advance. Content 4: When turning at an intersection, if there are heavy vehicles such as dump trucks or trucks on the outer side, smaller vehicles on the inner side should be cautious and yield, as heavy vehicles have more blind spots.
Was this review help?
13
2
Share
VonElliana
08/11/25 7:47pm
I believe the speed when crossing intersections should be controlled between 20 to 40 kilometers per hour, especially in areas with heavy pedestrian and vehicle traffic. Intersections are the most accident-prone zones because pedestrians and vehicles may suddenly emerge. During rainy days or at night when visibility is poor, I further reduce speed below 20 km/h to ensure a safety buffer. Remember, speeding through intersections significantly shortens braking distance. For example, the reaction time at 40 km/h is about 2 seconds, but at 50 km/h it takes over 3 seconds - a small miscalculation could lead to tragedy. Traffic regulations typically require speed reduction at intersections, such as common urban 30 km/h zones. Develop the habit of easing off the accelerator early, frequently checking mirrors and both sides to ensure safety before proceeding. This not only protects yourself but also gives others adequate reaction time.
Was this review help?
17
1
Share
Expand All
DelAubree
09/29/25 5:17am
I drive to and from work every day, passing countless intersections, with speed entirely dependent on the situation. When the light is green and the road is clear, I might pass through at 40 to 50 kilometers per hour, but in heavy traffic or during rush hour, I slow down to around 30 kilometers per hour. The key is to anticipate signal changes in advance and gradually reduce speed. Once at a busy intersection in Beijing, I maintained a steady 25 kilometers per hour when an electric scooter suddenly ran a red light, allowing me to stop in time and avoid a collision. Driving too slowly, like below 20 kilometers per hour, can easily cause traffic congestion; going too fast, such as 60 kilometers per hour, is risky, especially at intersections, curves, or school zones. I recommend adjusting flexibly based on weather and road conditions, rather than blindly following the aggressive driving of experienced drivers.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

Why is the Magotan 380 rarely purchased?

380 version is rarely bought because it is too expensive. Here are some explanations about the 380 version: 1. Introduction: The new Magotan still adopts Volkswagen's latest family-style design, and sales have proven that the current model very much meets the aesthetic requirements of its target audience, so there are not many changes in the exterior design. The body dimensions are 4866/1832/1464mm in length, width, and height, with a wheelbase of 2871mm. 2. Powertrain: The official 0-100km/h acceleration times for the Magotan 280, 330, and 380 are 9.1 seconds, 8.1 seconds, and 7.2 seconds respectively. The 7.2-second acceleration of the 380 model is considered upper-middle level for a mid-size sedan, and even the 2.0L Teana cannot easily outpace the Magotan 380.
6
2
Share

Can I still take the driver's license test if my ID card is demagnetized?

A demagnetized ID card cannot be used to apply for a driver's license, but you can apply for a temporary ID card. First of all, the ID card itself does not have magnetism. If the ID card cannot be swiped, it means the internal chip is damaged, and the stored information cannot be correctly read by the card reader. It cannot be remagnetized or repaired, and you must go to the police station to apply for a new one. Secondly, if the identity information cannot be read, you cannot register for the driver's license test. To reissue an ID card, you need to bring your household registration booklet. The police will verify the information in the household registration booklet, the applicant, and the computer's household registration records, then proceed with information collection and document processing. First, facial information is collected, which involves taking a photo for the ID. After the information is collected, the applicant signs a confirmation form, and the new ID can be collected from the public security authority after one month. The documents required for local household registration applicants to take the driver's license test are the household registration booklet and a valid ID card. For non-local household registration applicants, an ID card and a temporary residence permit are required. Note: The household registration booklet copy should include the page with the address and the applicant's personal page. If there are changes to the ID number or address on the personal page, an updated copy is also required.
4
1
Share

Why does the Magotan wireless charging display show foreign objects?

Foreign objects mainly refer to ferromagnetic metals. Here are some explanations about the display of foreign objects: 1. Eddy current effect: Ferromagnetic metals themselves form a closed loop. When a ferromagnetic metal is placed in a changing magnetic field, the magnetic flux passing through this closed loop changes, thereby generating an electric current inside the metal. The flow of this current within the metal causes energy loss, resulting in the metal heating up. This is known as the eddy current effect. 2. Foreign object detection principle: During normal operation of wireless charging, there is a changing magnetic field between the transmitter and receiver. When a metal foreign object is placed in this magnetic field, the metal heats up. If the temperature rises to a certain level, it can damage the wireless charging receiver and transmitter. Foreign object detection is designed to identify any metal foreign objects on the wireless charging pad to prevent them from overheating during the charging process and causing unnecessary damage.
10
5
Share

How to Cancel the Maintenance Reminder?

To cancel the maintenance reminder, follow these steps: Open the "Settings" on the dashboard, then select "Vehicle Settings," followed by "Maintenance Mileage," and finally choose "Clear." Below are the detailed items for car maintenance: 1. Replace: Engine oil and oil filter. 2. Check and Refill: Check the level of the auxiliary water tank and refill if necessary, check the windshield washer fluid tank and refill, check the tire pressure of all four wheels and adjust. 3. Clean: Perform an engine cleaning. Below is extended information about car maintenance intervals and main tasks: 1. 5,000 km: Replace engine oil and oil filter. 2. 10,000 km: Replace engine oil, oil filter, air filter, and fuel filter. 3. 15,000 km: Replace engine oil, oil filter, and cabin air filter. 4. 20,000 km: Replace engine oil, oil filter, air filter, and fuel filter. 5. 25,000 km: Replace engine oil and oil filter.
13
1
Share

What is the working principle of a one-way clutch?

The working principle of a one-way clutch is: when the inner race is fixed, the outer race can rotate freely in the clockwise direction without the wedge locking it. Below is a related introduction about the clutch: 1. Function: The clutch is part of the car's transmission system, installed between the engine and the transmission. Its role is to connect or disconnect the engine from the transmission. When the driver presses the clutch pedal, the clutch disconnects; when the pedal is released, the clutch connects. 2. Components: The clutch pressure plate is fixed to the engine flywheel, with the clutch disc located between the flywheel and the pressure plate. The clutch disc has a spline in the middle that can secure a drive shaft, which is the power input shaft of the transmission. The clutch disc is a wear part that needs regular replacement. As the vehicle's mileage increases, the clutch disc will gradually wear out. 3. Replacement: To replace the clutch disc, the connection between the engine and the transmission must be disconnected, and then the entire transmission must be removed from the vehicle. Only in this way can the clutch disc be replaced.
11
3
Share

What to Do When Facing a Vehicle Recall?

If your vehicle is recalled, simply take it to a 4S dealership for handling. Below is relevant information about vehicle recalls: 1. Process: The vehicle recall process includes the manufacturer effectively notifying relevant parties such as dealers, repair shops, and vehicle owners about the specific details of the defect and the methods to eliminate it. The manufacturer then organizes dealers and repair shops to implement specific measures such as repairs, replacements, or returns to eliminate the defects in their vehicle products. 2. Recall Materials: Mainly include: recall plan filing application form, recall plan, recall announcement, recall press release, recall notice, recall repair operation methods, recall cost statistics form, recall progress report, and recall summary report.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.