What is the speed limit on the Shangnan Expressway?

2 Answers
DelAlana
09/03/25 4:33am
The speed limit on the Shangnan Expressway is 120 km/h. The Shangnan Expressway project starts from the Ningluo Expressway, connecting to the Shangqiu-Zhoukou section of the Shangnan Expressway, and runs southwest through Shangcai, Suiping, Xiping, Wugang, and Fangcheng, ending at Sheqi where it connects with the Lannan Expressway. It links the four cities of Zhoukou, Zhumadian, Pingdingshan, and Nanyang, with a total route length of 190 kilometers, built according to the standard of a four-lane expressway in both directions. Expressway speed limit values: The speed limit on expressways must not exceed 120 km/h, and the speed limit value should be a multiple of 10 km/h. The difference in speed limit values between two adjacent speed limit sections should not exceed 20 km/h. The speed limit signs set on the mainline of highway interchanges, deceleration lanes, and exit ramps should not differ by more than 30 km/h. Speed limit sign design: The design of speed limit signs should be more concise, clear, and aesthetically pleasing. Speed limit signs should be placed at the starting point of the speed limit section and must not be obscured by roadside trees, structures along the route, or other traffic signs. They should be repeated as necessary.
Was this review help?
1
3
Share
AdalineDella
09/15/25 6:08am
I'm a seasoned driver who frequently travels on the Shangnan Expressway. The speed limit on this highway is generally 120 km/h, but it may vary in different sections, such as dropping to 100 or even 80 in mountainous and curved areas. I remember once driving through a curve where a sign clearly indicated a speed limit of 100, so it's crucial to pay attention to flashing lights as a reminder. Using a mobile navigation app while driving is quite helpful, as it provides real-time updates on speed limit changes, helping to avoid speeding tickets and ensuring safety. Don't rely too much on habit—always keep an eye on roadside signs, as some sections have lower speed limits at night to prevent accidents. Also, slow down in bad weather, as driving too fast on the expressway can easily lead to loss of control. Safety always comes first.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

How to Deal with Cheating in Driving Tests?

Here are the penalties for cheating in the driver's license test: 1. For applicants: If an applicant engages in bribery or cheating during the test, their qualification for the test will be canceled, and any other subjects they have already passed will be deemed invalid. The applicant will not be allowed to apply for a motor vehicle driver's license again within one year. If cheating is discovered or detected after the license has been issued, the motor vehicle driver's license will be confiscated in accordance with relevant regulations, and the applicant will not be allowed to apply for a motor vehicle driver's license again within three years. 2. For those who provide assistance: Those who illegally sell or provide test questions or answers for the purpose of cheating in the test will be punished in accordance with the relevant regulations. Anyone who takes the test on behalf of another person or allows another person to take the test on their behalf will be subject to detention or control, and may also be fined.
14
1
Share

What are the precautions for the Subject 3 driving test?

Here are the precautions for the Subject 3 driving test: 1. Lane changing: When the student hears "Please change lanes," they must turn on the turn signal and wait for 3 seconds before turning the steering wheel. If the driver is on a single-lane road, lane changing is not allowed at this time. 2. Straight-line driving: Once straight-line driving begins, the steering wheel cannot be turned randomly, nor can the solid lane line be crossed. The student should focus their vision on the distance ahead and make minor adjustments to the steering wheel to maintain straight-line driving, rather than keeping the steering wheel completely still. 3. Deceleration: When passing through crosswalks, school zones, bus stops, or straight intersections, the student should lightly press the brake pedal to slow down. 4. Light simulation: During light operations, both hands must not leave the steering wheel, otherwise it will result in immediate failure. If one hand needs to leave to operate the lights, the other hand must firmly hold the steering wheel.
13
1
Share

Why does the left front wheel cross the line during right reverse parking?

The reason for the left side crossing the line during right reverse parking is: the vehicle body is not straightened before entering the garage, and the steering wheel is returned too late; the reference point is observed too late when entering the garage, causing the car to be off-center. Types of reverse parking: Reverse parking into a garage is divided into two types: left reverse parking and right reverse parking. Content assessed in reverse parking: When reversing into the garage, observe the rearview mirror at the garage entrance. In the rearview mirror, compare the distance between the rear of the car and the garage corner at the control line of the garage entrance. Generally, a foot's length is just right to turn the steering wheel back. Reverse parking involves maneuvering the vehicle correctly into the garage from both sides while moving. It is a mandatory test item for obtaining a small car driver's license after 2013, mainly assessing the driver's ability to operate the car in a confined space.
9
2
Share

What are the reasons for air leakage in a rotary cylinder?

Air leakage in a rotary cylinder is caused by leakage between the cylinder head and the cylinder, severe wear between the piston ring and the cylinder, or a stuck piston ring leading to air leakage, among other reasons. Leakage between the cylinder head and the cylinder: Turn the engine by foot and carefully observe the joint surface between the cylinder head and the cylinder for any oil foam. If oil foam is present, it indicates air leakage at the cylinder head gasket. At this point, check whether the tightening nuts on the cylinder head are properly tightened; the bolts need to be tightened. Severe wear between the piston ring and the cylinder or a stuck piston ring causing air leakage: Replace the affected components. Damaged spark plug gasket or surface contamination: Forgetting to install the spark plug gasket can cause air leakage between the spark plug gasket and the cylinder head. Replace the gasket to resolve the issue.
1
1
Share

What to Do When Volkswagen Car Keys Are Locked Inside the Car?

Here are specific solutions for when car keys are locked inside the vehicle: 1. Use the spare key to open the door: Vehicles usually come with at least two original keys, one as the primary key and the other commonly referred to as the spare key. If the primary key is locked inside the car, try to retrieve the spare key. 2. Contact a locksmith: If you are far from home or traveling, retrieving the key might not be practical. In such cases, hiring a locksmith is a viable option. To engage a locksmith, you will need valid identification documents such as an ID card, passport, or household registration booklet, as well as proof of vehicle ownership like the vehicle registration certificate. If the registration certificate is also locked inside the car, you can verify it with the locksmith after unlocking. Without the registration certificate, you may need to file a report at the nearest police station. 3. Break the window: If retrieving the key or waiting for a locksmith is not feasible, breaking the window might be the only remaining option.
4
4
Share

What Can Cause a Purge Pump to Fail?

Here are the reasons that can cause a purge pump to fail: 1. Charcoal canister failure: The technician lifts the vehicle with a hoist, removes the charcoal canister, and uses an air gun to blow through the canister to check for blockages, thus confirming the issue. If the charcoal canister fails, it cannot absorb fuel tank vapors, causing the purge pump to malfunction. 2. Purge pump wiring failure: The technician opens the engine hood and inspects the purge pump wiring for any damage or breaks to confirm the issue. If the purge pump wiring fails, it cannot supply power to the purge pump, leading to its malfunction. 3. Purge pump failure: The technician uses a diagnostic tool to read the purge pump's data stream and analyze its operational status. If abnormal, the technician can measure the purge pump's resistance with a multimeter. If the resistance is outside the normal range, the failure is confirmed.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.