···
Log in / Register

What is the speed limit on the Rongwei Expressway?

5 Answers
LeKira
07/29/2025, 09:18 PM

The maximum speed shall not exceed 120 kilometers per hour, and the minimum speed shall not be less than 60 kilometers per hour. Expressway speed limit values: The speed limit on expressways shall not exceed 120km/h, and the limit value should be an integer multiple of 10km/h. The difference in speed limits between two adjacent sections should not exceed 20km/h. For highway interchanges, the speed limit signs on the mainline, deceleration lanes, and exit ramps should not differ by more than 30km/h. Speed limit sign design: Speed limit signs should be designed to be more concise, clear, and aesthetically pleasing. They should be placed at the starting point of the speed-limited section and must not be obscured by roadside trees, structures, or other traffic signs. Additional signs should be installed as needed.

Was this review help?
19
3
Share
LunaLynn
08/15/2025, 02:55 AM

I've been driving for over a decade and frequently travel on the Rongwei Expressway, where the speed limit is generally 120 km/h, which is quite common for expressways nationwide. But to be honest, it depends on the specific section—mountainous areas or tunnels might have limits reduced to 100 or 80 km/h, mainly due to more curves and safety being the priority. Last month, I drove through that mountainous section, and the navigation kept reminding me to slow down, or else it's easy to get fined for speeding. In rainy or foggy weather, you should slow down even more—120 km/h feels too fast. Last year, I witnessed a rear-end collision in the rain, which was truly terrifying. Obeying speed limits not only saves money but also ensures you get home safely—that's what I've learned from experience. On the expressway, don’t rush; just set the cruise control and maintain a steady pace.

Was this review help?
12
2
Share
Expand All
VanLorenzo
10/20/2025, 02:21 AM

As a parent with children at home, I pay special attention to speed limits on highways. The Rongwei Expressway usually has a speed limit of 120 km/h, but I never exceed the speed limit when traveling with my kids—safety comes first. Speed limits can vary in different sections with numerous cameras, and may drop to around 100 km/h near entrances and exits. I prefer using mobile navigation to monitor my speed in real-time—it's even more accurate than the car's built-in system. Remember, a speeding ticket plus penalty points could cost you several family dinners. Driving at night requires brighter headlights, and you should be extra cautious and slow down when visibility is poor. Treat your car as a moving home—safe travels are what truly matter.

Was this review help?
9
1
Share
Expand All
TannerFitz
12/03/2025, 01:52 AM

From an engineering perspective, highway speed limits are based on safety design standards. The mainline speed limit of the Rongwei Expressway is 120 kilometers per hour, but certain sections such as tunnels and bridge areas may be adjusted to 80 kilometers per hour, taking into account braking distance and curve risks. Weather factors like rain and fog require additional speed reduction. The use of auxiliary equipment such as ADAS systems can provide real-time speed limit change prompts, ensuring safe and efficient travel while avoiding unexpected breakdowns.

Was this review help?
18
0
Share
Expand All
Penelope
01/23/2026, 03:16 AM

I'm a car enthusiast and often go for drives on the Rongwei Expressway on weekends. The speed limit is only 120 km/h, to be honest, it's too slow! But there are so many cameras that you have to behave. Fortunately, you can let loose a bit on some open stretches, but you have to watch the road conditions. Installing a dash cam with a map app to remind you of the current speed limit is a real lifesaver. Have fun, but don't risk your life—speeding is dangerous and hard on the car. Tires wear out faster, and fuel costs skyrocket. Drive steadily and enjoy the scenery—that's the way to go.

Was this review help?
11
0
Share
Expand All
More Forum Discussions

What are the precautions for starter motor repair?

Start motor repair precautions are: 1. Disassembly or decomposition of all parts should be carried out after the starter motor has cooled down, otherwise it may cause burns; 2. Before performing maintenance operations, disconnect the negative terminal of the battery. If the battery cables are not removed, touching the starter terminal B may produce sparks, leading to damage to electrical components. The reasons for the starter motor not turning are: 1. Insufficient battery power or loose connections of various wires, dirty terminals causing poor contact; 2. Open circuit in the starter solenoid switch coil or poor contact of the contact disc; 3. Burned contacts of the starter relay, open circuit or burnout of the relay magnetic coil; 4. Bent armature shaft inside the starter motor or overly tight bearings, dirty or burned commutator, excessively worn brushes, too soft springs preventing contact, short circuit, open circuit, or grounding in the armature coil or field coil; 5. Fault in the anti-theft system.
14
1
Share

Is the fuel consumption of Dongfeng Tianlong Flagship 600 horsepower high?

Dongfeng Tianlong 600 horsepower has low fuel consumption, even very fuel-efficient. Additional information as follows: 1. The Dongfeng-style cab is strong and elegant. 2. The robust styling with streamlined dynamism not only reflects the rugged momentum of European and American trucks but also aligns with Eastern aesthetic standards. 3. The three-dimensional Dongfeng emblem, resembling two swords combined, exudes a regal demeanor, giving drivers and passengers a sense of success. 4. The full-steel double-layer bumper fully demonstrates Dongfeng's care for customers, and its appearance is aesthetically pleasing. 5. A pair of bright crystal headlights, shaped like tiger teeth, add the finishing touch, enhancing the kingly dominance. 6. Dongfeng Tianlong has a wide power range, from 230 to 420 horsepower. 7. Dongfeng's new-generation 13-ton single and double-stage heavy-duty axles, incorporating international technology, boast qualities of 'anti-tooth breakage, high load-bearing capacity, high torque, and long lifespan'.
5
5
Share

How long does it usually take for the DMV to restore internet connection?

System upgrades and auxiliary website failures have varying repair times depending on the severity of the issue. Generally, the larger the scope of the upgrade or failure, the longer the repair time will take. For payment system failures, repairs are usually completed within half a day at most. Server room failures or fiber optic cable cuts are less common and typically take about 1-2 working days to fix. Common causes of internet outages: 1. System updates: Like games, traffic management systems require updates, which can temporarily disable the internal network—a relatively common occurrence. 2. Auxiliary website failures: Some services rely on external auxiliary websites, and if these websites experience network issues, certain services may be unable to process approvals. 3. Payment system failures: Network transmission problems can disrupt payment systems, preventing the driver management system from printing tasks. 4. Server room failures: If the server room of a higher-level or provincial department fails, driver management services may be temporarily unavailable. 5. Fiber optic cable failures: Frequent urban construction activities sometimes lead to accidental cuts in signal fiber optic cables.
18
0
Share

Where is the electric seat control module located in the Tiguan?

Under the driver's seat, the seat needs to be removed. Below is relevant information about electric seats: 1. Working principle: Electric seat adjustment can be understood as completing adjustment actions through motors controlled by buttons and other methods. The directional adjustment of the seat is based on three adjustment mechanisms: the seat recliner, seat rail, and seat lift mechanism. Each mechanism can provide adjustments in two or more directions. The more adjustment directions a seat has, the better the driver can find a suitable driving posture and reduce driving fatigue. 2. Function: To provide the driver and passengers with an easy-to-operate, comfortable, and safe driving position.
15
5
Share

What are the reasons why the Xuan Yi one-button start brake cannot be pressed and fails to start?

Here are the reasons why the Xuan Yi one-button start brake cannot be pressed and fails to start: 1. No fuel in the car: Basic common sense, the car will definitely not start if there is no fuel. 2. Battery failure: If the car battery is dead or faulty, it will naturally fail to start. 3. Spark plug issue: The spark plug is a key component in the car's ignition system, so whether the spark plug can function properly affects the vehicle's performance and efficiency. 4. Excessive carbon buildup: Too much carbon buildup in the vehicle can also prevent it from starting, requiring regular cleaning of carbon deposits at the service center.
15
3
Share

What Causes the Brake Pedal to Be Hard to Press in New Energy Vehicles?

Here are the possible reasons why the brake pedal in new energy vehicles is hard to press: 1. Vacuum booster issue: The vacuum booster pump may be leaking or malfunctioning. It's important to note that the force applied to the brake pedal is amplified by the brake booster pump. If it fails, the brake loses its power assistance, making it difficult to press. 2. Brake booster pump problem: Pressing the brake pedal after the engine is turned off is also related to the brake booster pump. The brake booster pump continuously generates vacuum only when the engine is running. When the engine is off, it relies on the residual vacuum stored earlier, which typically depletes after a few presses. However, this condition is restored after the engine is started and is not considered a malfunction.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.