What is the speed limit on the Beijing-Tibet Expressway?

4 Answers
VonAlexis
07/29/25 5:40pm
On the Beijing-Tibet Expressway, the speed limit is 80 to 100 kilometers per hour in hilly or valley sections, and 120 kilometers per hour in plain areas. Here are the relevant details: 1. Beijing-Tibet Expressway: The Beijing-Tibet Expressway, also known as the Beijing to Lhasa Expressway, abbreviated as G6, has a planned length of 3,718 kilometers and an operational length of 1,830 kilometers. 2. Precautions: Due to the high altitude in Tibet, it is advisable to carry oxygen bottles and some medical equipment when driving through the Beijing-Tibet Expressway into the Tibetan region to prevent altitude sickness.
Was this review help?
7
3
Share
VonAmelia
08/14/25 9:04am
I've driven my private car on the Beijing-Tibet Expressway many times. The speed limits vary significantly along this long route from Beijing to Lhasa. Generally, the speed limit is 120 km/h on flat sections, but it drops to 80 or 100 km/h in mountainous areas like the Inner Mongolia Plateau and Gansu. Extra caution is needed in tunnels and curves, where the speed limit can be as low as 70 km/h. Using navigation apps like Gaode can display real-time speed limits to avoid speeding tickets. Safe driving is paramount—reduce speed to below 60 km/h in rain or snow. The entire expressway has speed cameras, so it's advisable to plan your trip in advance and bring enough supplies for a comfortable long-distance drive.
Was this review help?
18
4
Share
Expand All
LucyRose
10/13/25 8:22am
From my experience, the speed limits on the Beijing-Tibet Expressway vary by section. Passenger cars are typically limited to 120 km/h, but special areas like tunnels have an 80 km/h limit, while bridges are reduced to 70 km/h. For large vehicles, the restrictions are even stricter, with speed limits around 90 km/h. On the Qinghai section's high-altitude roads, the limit drops to 100 km/h for safety. Safety tip: Use apps to check real-time data or watch for updated road signs. Speeding not only incurs fines but also poses high risks, so maintain a steady speed and enjoy your journey.
Was this review help?
12
5
Share
Expand All
LaLuna
10/13/25 8:24am
I recently drove on the Beijing-Tibet Expressway, and even as a novice driver, I was worried about speeding. Most sections have a speed limit of 120 km/h, but it slows down to 80 km/h on steep slopes or near towns. It's recommended to install a navigation app for real-time speed limit alerts. In rainy or foggy weather, slow down to 60 km/h for safety first—don't rush too much.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

What are the differences between Land Cruiser and Prado?

The differences between Land Cruiser and Prado are in body dimensions, fuel tank capacity, and vehicle positioning. Below are the specific explanations for these differences: Body dimensions differ: The Prado has body dimensions of 5010mm in length, 1885mm in width, and 1890mm in height, with a wheelbase of 2790mm. The Land Cruiser measures 5170mm in length, 1975mm in width, and 1930mm in height, with a wheelbase of 2850mm. Fuel tank capacity differs: The Prado has a fuel tank capacity of 87 liters, while the Land Cruiser has a fuel tank capacity of 138 liters. Vehicle positioning differs: The Prado leans more towards being an urban SUV, whereas the Land Cruiser is similar to a Hummer, capable of performing at its true level in military or more extreme environments.
3
2
Share

How many seats does the new Lincoln SUV Nautilus have?

The new Lincoln SUV Nautilus is a 5-seater. Below is an introduction to the relevant details of the new Lincoln SUV Nautilus: Body dimensions: This vehicle is a mid-to-large-sized car with body dimensions of 4849mm in length, 1936mm in width, and 1691mm in height, with a wheelbase of 2849mm. The front track is 1653mm, the rear track is 1663mm, and the fuel tank capacity is 70 liters. Powertrain: The new Lincoln SUV Nautilus is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 165kW and a maximum torque of 368Nm. It features front-wheel drive, with a front suspension using MacPherson struts and a rear suspension using a multi-link independent suspension.
15
5
Share

Can a 60-year-old person still obtain a driver's license?

A 60-year-old can obtain a driver's license. According to the "Regulations on the Application and Use of Driver's Licenses," motor vehicle drivers aged 60 or above must undergo an annual physical examination. Within fifteen days after the end of the scoring cycle, they must bring their driver's license and physical examination form to the vehicle management office to submit the "Motor Vehicle Driver's Physical Condition Certificate." If the driver's license is an A or B class, it must be replaced with a C class license at the age of 60, which is intended for the safety of elderly drivers. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," there are age restrictions for applying for a driver's license: the age requirement for applying for a small car (C class) or light motorcycle license is between 18 and 70 years old, while other A or B class licenses require applicants to be under 50 years old. Based on this regulation, if the applicant is under 50, they can apply for any type of driver's license. For those aged 50 to 70, only a C class license can be applied for. China has a comprehensive driver's license management system, categorizing vehicles into 16 levels of licenses. Some licenses are excluded due to their specific purposes, including: the C5 license for disabled individuals, the M license for wheeled self-propelled machinery, the N license for trolleybuses, and the P license for trams. The age requirements for the remaining 12 licenses for popular vehicle types are as follows: C1 license: Permits driving small cars and can also cover C2, C3, and C4 license types. The minimum age for application is 18 years old. C2 license: Permits driving small automatic transmission cars but cannot cover other license types. The minimum age for application is 18 years old. C3 license: Permits driving low-speed trucks and can also cover C4 license types. The age range for application is 18 to 60 years old. C4 license: Permits driving three-wheeled cars but cannot cover other license types. The age range for application is 18 to 60 years old. D license: Permits driving ordinary three-wheeled motorcycles and can also cover E and F license types. The age range for application is 18 to 60 years old. E license: Permits driving ordinary two-wheeled motorcycles and can also cover F license types. The age range for application is 18 to 60 years old. F license: Permits driving light motorcycles but cannot cover other license types. The minimum age for application is 18 years old. A1 license: Permits driving large passenger vehicles and can also cover A3, B1, B2, C1, C2, C3, C4, and M license types. The age range for application is 22 to 60 years old. A2 license: Permits driving heavy and medium-sized full trailers and semi-trailers and can also cover B1, B2, C1, C2, C3, C4, and M license types. The age range for application is 22 to 60 years old. A3, B1, B2 licenses: Respectively permit driving buses with more than 10 passengers, medium-sized passenger vehicles, and heavy or medium-sized trucks. They can also cover C1, C2, C3, and C4 license types. The minimum age for application is 20 years old, and the maximum age is 50 years old.
17
3
Share

Can an Automatic Transmission License Be Upgraded to a Manual Transmission License?

An automatic transmission license can be upgraded to a manual transmission license. However, an automatic transmission license (C2) does not automatically upgrade to a manual transmission license (C1). To upgrade from a C2 to a C1 license, the holder must apply for an additional license. The applicant must re-enroll and pass the C1 license examination to obtain the upgrade. The formal term for this process is "additional licensing," and the procedure is the same as applying for an initial driver's license—simply register at a driving school. The only difference is that the applicant must present their current driver's license during the application process, and after passing Subject 4, the original license must be surrendered. Conditions for upgrading from C2 to C1: 1. Pass a medical examination meeting the requirements for the driver's license test. 2. Hold the C2 license for at least one year, meaning the probationary period must be completed. 3. No record of accumulating 12 penalty points (full demerit points) in the current scoring cycle. If all three conditions are met, the applicant can reapply for the C1 license. After passing Subjects 2 and 3, they can exchange their C2 license for a C1 license. Required documents: - Proof of identity. - Original and photocopy of the applicant's current driver's license. - Medical certificate issued by a county-level or above medical institution. - Recent one-inch bareheaded white-background photo. Differences between manual and automatic transmission licenses: 1. Permitted vehicle types differ. The manual transmission license (C1) allows driving "small cars," while the automatic transmission license (C2) permits "small automatic transmission cars." 2. License codes differ. The manual transmission license code is "C1," while the automatic transmission license code is "C2." 3. Vehicles allowed differ. The manual transmission license permits: "small and micro passenger vehicles, light and micro cargo vehicles, and light and micro specialized operation vehicles." The automatic transmission license permits: "small and micro automatic transmission passenger vehicles and light and micro automatic transmission cargo vehicles." Other permitted vehicle types differ. The manual transmission license (C1) also allows driving: "small automatic transmission cars (code C2), low-speed cargo vehicles (code C3), and three-wheeled vehicles (code C4)."
13
3
Share

What is the normal tire pressure for high-speed driving?

The normal tire pressure for high-speed driving is between 2.3 and 2.5 bar. The following are the hazards of excessive and insufficient tire pressure: Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance, causing steering wheel vibration and deviation, reducing driving comfort, accelerating wear on the central tread pattern, making the tire prone to bulging and trapping stones, overstretching and deforming the tire cords, reducing tire elasticity, increasing impact and noise during driving, and making the tire more susceptible to punctures from sharp objects like nails and glass, leading to internal cracks and blowouts. Hazards of insufficient tire pressure: The friction coefficient with the road surface increases, leading to higher fuel consumption. The friction between the tire and the ground multiplies, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength, which can result in blowouts during high-speed driving. Insufficient tire pressure increases tire deformation, making the sidewalls prone to cracks and generating flexing movements, leading to excessive heat, accelerating rubber aging, fatigue of the cord layer, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear, making the steering wheel heavier, causing deviation, reducing handling performance, and increasing tire noise.
20
5
Share

How Long Does a Major Car Service Take?

Major car service typically takes between 2 to 5 hours. Below is relevant information about major car service: Major car service includes: Replacement of engine oil and oil filter, spark plugs, air filter, cabin air filter, transmission fluid, brake fluid, coolant, throttle body cleaning, engine carbon deposit removal, and a comprehensive inspection of vehicle components. This includes checking for oil leaks, the condition of rubber components such as tires and bushings for aging and wear. Importance of car maintenance: Replacing the fuel filter can filter out impurities and moisture from gasoline, providing clean fuel for the engine and enabling it to perform at its best. During engine operation, various frictions occur, and the resulting debris mixes with the engine oil. Without regular oil filtration, this directly affects the engine's lubrication.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.