···
Log in / Register

What is the speed limit on the Beijing-Hong Kong-Macao Expressway?

4 Answers
LeSawyer
07/23/25 3:32pm
Speed limit regulations for the Beijing-Hong Kong-Macao Expressway: 1. Speed: On the three-lane expressway in the same direction, vehicles in the right lane must not drive below 60 km/h. The leftmost lane (Lane 1) has a speed limit of 120-100 km/h for passenger cars; the middle lane (Lane 2) has a speed limit of 100-80 km/h for mixed traffic; the rightmost lane (Lane 3) has a speed limit of 100-60 km/h for trucks. 2. Maximum speed limit indicated by expressway signs: no more than 120 km/h for three-lane sections, no more than 100 km/h for two-lane sections, generally 80 km/h for bridges and mountainous areas, and 60 km/h for tunnels.
Was this review help?
19
0
Share
McCayden
08/10/25 11:25am
Most sections of the Jinggang'ao Expressway have a speed limit of 120 kilometers per hour, a standard designed to balance traffic efficiency and safety. Having driven it several times, I find this speed setting quite reasonable—it allows for quick travel without excessively high risk of losing control. However, it's important to note that in certain specific sections, such as mountainous curves or near urban entry/exit points, the speed limit drops to 100 or 80 kilometers per hour, especially during rainy or foggy weather when extra caution is needed. I remember one night driving on the expressway with poor visibility, I failed to notice the speed limit change and nearly had an accident. Since then, I’ve made it a habit to check real-time navigation alerts. Safety comes first—adhering to speed limits not only avoids fines and penalty points but also protects yourself and your family.
Was this review help?
1
4
Share
Expand All
OEmma
09/22/25 5:18am
I often drive long distances on highways, and the speed limit on the Beijing-Hong Kong-Macao Expressway is generally 120 kilometers per hour, which remains consistent on standard sections. However, based on my experience, there are some areas where speed limit signs are unclear or temporarily changed, such as tunnels limited to 100 km/h and bridge sections reduced to around 110 km/h. Driving too fast can easily get you caught by speed cameras—I’ve been fined twice myself, 200 yuan each time plus 3 penalty points, which is quite a loss. I recommend drivers pay more attention to roadside signs or use in-car GPS warning systems. When driving on highways, don’t just focus on making good time; slowing down a bit can reduce the risk of sudden braking or tire skidding.
Was this review help?
20
3
Share
Expand All
LillianaLee
11/05/25 8:38am
Traffic regulations stipulate that the speed limit on the main section of the Jinggang'ao Expressway is 120 kilometers per hour, based on national highway safety standards. I understand this setting takes into account traffic density and accident prevention factors; non-compliance results in speeding penalties starting from a 200 yuan fine, with severe cases leading to license revocation. In actual driving, I've noticed speed limits are frequently adjusted, such as automatically reduced to 80 kilometers in bad weather. Ensuring your vehicle's speedometer is accurately calibrated is crucial to avoid misjudgment. Adhering to speed limits not only avoids penalties but also significantly reduces issues caused by fatigued driving.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

Where is the Corolla's rearview mirror folding switch located?

The Corolla's rearview mirror folding switch is located on the control panel to the left of the steering wheel. When the vehicle is stationary, pressing the rearview mirror folding button will fold them to prevent pedestrians and other vehicles from hitting them. For Corolla models not equipped with automatic rearview mirror folding, the mirrors need to be folded manually. The Corolla is a compact sedan under Toyota, equipped with two engines: one is a 1.2T turbocharged engine, and the other is a 1.8L naturally aspirated engine. The 1.2T turbocharged four-cylinder engine has a maximum power output of 85kW and a maximum torque of 185Nm, while the 1.8L naturally aspirated engine delivers a maximum power of 72kW and a maximum torque of 142Nm.
5
2
Share

Where is the engine number of the Tiggo 5 located?

The engine number of the Tiggo 5 is located on the engine block, while the chassis number is stamped on the right side of the front compartment drainage channel and on the instrument panel near the windshield. Taking the 2017 Tiggo 5 as an example, it is a compact SUV with body dimensions of 4506mm in length, 1841mm in width, and 1740mm in height, a wheelbase of 2610mm, and a curb weight of 1498kg. The 2017 Tiggo 5 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 152PS, a maximum torque of 205Nm, and a maximum power of 112kW, paired with a 5-speed manual transmission.
1
2
Share

What is the lifespan of the 1.4T turbocharger in the Sagitar?

The lifespan of the 1.4T turbocharger in the Sagitar is approximately 200,000 to 300,000 kilometers. The lifespan of the turbocharger is equivalent to that of the engine. Taking the 2021 Sagitar 1.4T as an example, it belongs to the compact car category with the following dimensions: length 4753mm, width 1800mm, height 1462mm, wheelbase 2731mm, fuel tank capacity 50 liters, and curb weight 1410kg. The 2021 Sagitar 1.4T features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.4L turbocharged engine delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
1
2
Share

What are the reasons for high RPM in a three-cylinder turbocharged engine?

The reasons for high RPM in a three-cylinder turbocharged engine are: 1. Stuck idle control valve; 2. Faulty engine coolant temperature sensor; 3. Engine computer malfunction; 4. Improper idle adjustment; 5. Throttle malfunction; 6. Intake pipe leakage. The solutions for high RPM in a three-cylinder turbocharged engine are: 1. Adjust the throttle opening; 2. Replace the fuel injector, air conditioning clutch, intake system, and engine. The maintenance methods for the engine are: 1. Use qualified engine oil; 2. Use qualified coolant and antifreeze; 3. Regularly clean the radiator scale; 4. Regularly remove engine carbon deposits; 5. Regularly replace the three filters of the car; 6. Maintain a reasonable RPM.
10
2
Share

Should You Shift Gear or Engage the Handbrake First When Getting in the Car?

When getting in the car, you should shift gear first and then engage the handbrake. This is to prevent the car from rolling back when starting on an uphill slope. The correct method to engage the handbrake is: 1. Press the handbrake button before pulling it up; 2. Apply gentle force when pulling the handbrake; 3. The handbrake should be engaged to about 70% of its full capacity, as pulling it all the way to the top will shorten the lifespan of the handbrake cable. The dangers of forgetting to engage the handbrake while driving include: 1. The brake pump cannot provide sufficient braking force, causing the engine to stall; 2. Accelerated wear of the brake disc and hardening of the brake pads due to friction heat; 3. Stretching of the handbrake cable; 4. Leakage of brake caliper fluid, leading to brake failure.
7
3
Share

What are the advantages of double-wishbone independent suspension?

The advantages of double-wishbone independent suspension are as follows: 1. Absorbs more vibrations, improving the chassis's vibration filtering performance. 2. Helps suppress body roll, keeping the wheels more firmly planted on the ground. 3. The shock absorbers bear no lateral load, and the upper end height is lower, which helps reduce the height of the front end and improves the vehicle's styling. Here is a related introduction: Double-wishbone suspension refers to a suspension system with two wishbones. Depending on whether the upper and lower wishbones are of equal length, it can be further classified into equal-length double-wishbone and unequal-length double-wishbone suspension. For unequal-length double-wishbone suspension, by appropriately selecting and optimizing the lengths of the upper and lower wishbones and arranging them reasonably, the changes in wheel track and front-wheel alignment parameters can be kept within acceptable limits, ensuring the vehicle has excellent driving stability.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.