What is the speed limit on Shan-Zhan Expressway?

1 Answers
DeCorey
07/24/25 10:59am
Shan-Zhan Expressway has a speed limit of 120 km/h. Below is relevant information about expressways: Definition of expressway: Expressway, also known as a highway, refers to a road specifically designed for high-speed vehicle travel. Advantages of expressways: Increase driving speed, save travel time; enhance traffic efficiency; reduce transportation costs; decrease traffic accidents; save land resources (single lane). Disadvantages of expressways: High construction costs, ranging from tens of millions to hundreds of millions per kilometer; environmental impact; longer construction periods as expressway construction requirements are much higher than ordinary roads; in case of traffic accidents, they are usually more severe, and traffic congestion is harder to disperse.
Was this review help?
8
4
Share
More Forum Discussions

What is the penalty for driving at 65 km/h in a 50 km/h urban speed limit zone?

Driving at 65 km/h in a 50 km/h urban speed limit zone will result in a fine and 6 demerit points. Motor vehicles must not exceed the speed indicated by traffic signs or markings on the road. Demerit point standards for speeding violations: Speeding within 10% of the speed limit: Warning issued. Fine and 3 demerit points: Speeding between 10%-20% above the limit: Fine and 3 demerit points. Fine and 6 demerit points: Speeding between 20%-50% above the limit: Fine and 6 demerit points. Speeding over 50% above limit: Exceeding speed limit by more than 50% may result in license suspension and fine. Demerit point standards for wrong-way driving: 12 demerit points for any of the following violations: Reversing, driving against traffic flow, or making U-turns across median dividers on expressways. 3 demerit points for any of the following violations: Improper overtaking, failure to yield, or driving against traffic flow. Penalties for wrong-way driving under Article 90 of the Road Traffic Safety Law: Warnings or fines for violating road traffic regulations.
7
1
Share

Can Pearl White Car Paint Be Repaired Without Color Difference?

Pearl white car paint cannot be repaired without color difference. Because pearl white is a metallic paint, the paint quality is relatively good, and later touch-ups are prone to color differences. Reasons why pearl white paint cannot be repaired without color difference: The process of touch-up paint is different from the original factory paint. In fact, for pearl white car paint, local touch-ups can be done, and since the proportion of raw materials used is fixed, color matching is relatively easier. However, whether the color difference after touch-up is obvious depends on the color matching skills and painting techniques of the repair technician. Precautions for car painting: Choose a good auto repair shop: When performing body shaping and painting for your car, choose an auto repair shop with a good reputation and skilled technicians. It doesn’t necessarily have to be a 4S shop; some experienced repair technicians’ own shops are also good. Negotiate the price in advance: If you are not repairing the car at a 4S shop, negotiate the price in advance when going elsewhere for body shaping and painting to avoid various disputes after the repair. Ensure proper shaping: Car body shaping is crucial. Poor shaping can make the car surface look uneven, greatly affecting its appearance. When the repair technician is shaping, watch closely to ensure the shaping is smooth and even.
1
4
Share

Where is the first aid kit located in the Buick Verano?

The Buick Verano does not come with a first aid kit. If owners wish to have one, they need to purchase it separately and place it in the trunk. Typically, first aid kits are equipped in luxury models and serve the primary purpose of quickly stopping bleeding. If a car is equipped with a first aid kit, it is important to replace it periodically. The Buick Verano is a compact sedan under the Buick brand, with dimensions of 4723mm in length, 1802mm in width, and 1466mm in height, and a wheelbase of 2700mm. The car features a 4-door, 5-seat sedan body style, a 6-speed automatic transmission, front-wheel drive, and is powered by two engine options: a 1.0L turbocharged engine and a 1.3L turbocharged engine.
16
4
Share

What to Do When the Car Pulls to One Side?

The solution to a car pulling to one side is to perform a four-wheel alignment. During driving, the car may inevitably experience impacts, which can cause deviations in the wheel alignment after the tires are hit. The supporting components of the car's chassis may also undergo slight deformation due to bumps or vibrations. The four-wheel alignment primarily adjusts the relative position between the wheels and the chassis. For the front wheels, this includes caster angle, kingpin inclination, camber, and toe; for the rear wheels, it includes camber and toe. Situations that require a four-wheel alignment include: 1. The vehicle's driving performance is affected; 2. Damage to the chassis and suspension due to an accident; 3. Abnormal tire wear; 4. Components of the axle or suspension have been removed.
3
0
Share

What Are the Reasons for Strong Exhaust Smell Inside the Car?

There are several main reasons for a strong exhaust smell inside the car: 1. The car hasn't warmed up yet, and the smell will dissipate after warming up; 2. Incomplete combustion due to improper air-fuel mixture; 3. Carbon buildup or erosion on the spark plugs; 4. Leakage in the ignition wires; 5. Malfunctioning oxygen sensor, insufficient intake system pressure, or inadequate air intake. Methods to address the strong exhaust smell inside the car: 1. First, clean the carbon deposits. If the smell persists after cleaning, the vehicle should be inspected and repaired; 2. Open the car doors to eliminate odors inside the car. Regularly open the windows and doors to facilitate air exchange between the interior and exterior, allowing harmful gases inside the car to evaporate as quickly as possible.
13
5
Share

How to Check Tire Pressure on the Tire?

To check the tire pressure on the tire, you can use a tire pressure gauge or an air pressure gauge. First, ensure that the center line of the gauge's measuring port forms an angle of 90 to 180 degrees with the axis of the gauge body. When observing, align the pointer with the mirrored pointer; the value indicated by the pointer at this point is the pressure reading, accurate to one decimal place. When the measuring end of the pressure gauge is pressed firmly against the tire's valve stem, the gauge's pointer will deflect, and the indicated value is the tire's inflation pressure. The greater the internal pressure, the more the pointer deflects. Nowadays, more and more cars are equipped with tire pressure monitoring systems, which can display the tire pressure directly on the dashboard.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.