What is the speed limit in tunnels?

1 Answers
DelAdelyn
07/25/25 12:25pm
Highway tunnel speed limits range between 60km/h to 80km/h, while urban road tunnel speed limits are between 40km/h to 60km/h. Highway tunnel speed limits range between 60km/h to 80km/h. Lane changing and overtaking are prohibited in tunnels due to limited space and poor lighting conditions, which can easily disrupt normal traffic flow. Additionally, most tunnels are now equipped with comprehensive camera surveillance systems, and illegal lane changes may result in a 3-point penalty and a fine. Urban road tunnel speed limits are between 40km/h to 60km/h. The maximum speed for vehicles passing through tunnels is determined by the management unit based on actual road conditions. When approaching a tunnel, speed limit signs will be prominently displayed at the entrance, and there will also be speed limit reminders inside the tunnel. Traffic police departments enforce management according to the speed limits set by the competent authorities. Considering that the design speed and actual operating speed may sometimes be inconsistent, drivers may appropriately increase their speed below 60km/h to improve traffic efficiency, provided that safety is not compromised. However, the speed must not exceed 50% of the posted limit, and violations will be penalized according to the law. Before entering a tunnel, drivers must adjust their speed according to the speed limit signs on both sides of the road. Headlights should be turned on before entering the tunnel and turned off after completely exiting. Due to the limited space and poor lighting conditions in tunnels, illegal lane changes are prohibited. Modern tunnels are equipped with advanced camera systems that can clearly capture and upload evidence of any violations.
Was this review help?
11
0
Share
More Forum Discussions

Where is the Iveco engine number located?

The Iveco engine number is located on the left side of the engine, above the diesel pump, near the driver's side. In addition to the above method, the engine number can also be checked in the following 4 ways: The vehicle license shows the engine number, usually located in the second-to-last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. Please note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, and each engine can only use one engine number, with each engine's number being unique. The engine number consists of four parts, each with different meanings. The first part includes the product series code, replacement symbol, and regional or enterprise code, which the manufacturer selects as needed with corresponding letters, but must be approved and filed by the industry standard regulatory body; the middle part consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter; the rear part consists of symbols for structural features and usage features; the tail part is a distinguishing symbol, used to differentiate products within the same series due to improvements or other reasons, as selected by the manufacturer.
10
1
Share

What does 'trip' on the dashboard mean?

The 'trip' on the car dashboard represents the trip mileage, which can be used to record the distance traveled for each trip. Here is a related introduction to the car odometer: 1. The tachometer is usually located inside the instrument panel, placed symmetrically with the speedometer. The tachometer operates based on magnetic principles, receiving pulse signals generated when the primary current in the ignition coil is interrupted. The car odometer includes two LCD digital display windows connected to the same signal source, which respectively accumulate the current trip mileage and the total mileage. The current trip mileage typically has four digits for short-term counting and can be reset. The total mileage has six digits and cannot be reset. The accumulated mileage numbers in an electronic odometer are stored in non-volatile memory, preserving the data even when there is no power. 2. The car odometer is usually located directly in front of the driver's position. A typical mechanical odometer is connected to a flexible shaft containing a steel cable. The other end of the flexible shaft is connected to a gear in the transmission. The rotation of the gear drives the steel cable to rotate, which in turn drives a magnet inside the odometer's housing to rotate. The housing is connected to the pointer and, through a hairspring, positions the pointer at zero. The speed of the magnet's rotation causes changes in the size of the magnetic lines of force, disrupting the balance and thereby moving the pointer.
1
0
Share

What car has five vertical bars?

In China, the new energy vehicle brand WM Motor is the car brand that uses a logo with five vertical bars. Here is the relevant information: 1. WM Motor's logo consists of five vertical lines, representing cloud services, platform, people, cars, and multi-channel. These five elements embody WM Motor's production and sales philosophy, with the five lines continuously interacting. WM Motor adopts a global layout, with R&D centers in Germany, Shanghai, Beijing, Chengdu, and Wenzhou. 2. The five vertical bar logo was also used by Fiat in the mid-1980s. During the 1980s, Fiat's best-selling models included the Panda, Uno, and Croma. By the mid-1980s, these models required a redesign, leading to the creation of the five vertical bar logo.
19
2
Share

How to Open the Fuel Tank Cap on a BMW?

BMW fuel tank cap opening method is as follows: There should be a button to open the fuel tank cap on the left side of the driver's position. Simply press it to open. The fuel tank cap refers to the container on the car used to store gasoline. Below is some related information about the fuel tank cap: 1. The fuel tank cap is square-shaped, made of stainless steel, and has excellent sealing. It only has a small circular opening, about the size of a bottle cap, for easy storage. It is usually located at the rear of the car. Modern cars often allow the trunk and fuel tank cap to be operated remotely from inside the cabin, providing great convenience to the owner. 2. If the fuel tank cap cannot be opened, you can start from the trunk. First, remove the liner covering the fuel tank in the trunk. The liner is usually secured by some plastic clips and can be easily pried open with a screwdriver. After removing the liner, you can see the locking mechanism of the fuel tank cap and the cable used for remote operation. Just pull the cable to open the fuel tank cap.
10
4
Share

What are the reasons for the lack of elasticity in airbag seats?

The main reasons for the lack of elasticity in airbag seats are the following two points: 1. The airbag has no air; 2. The airbag is leaking or blocked. The usage methods of airbag seats are: 1. Shock absorption limit wrench: In cases of poor road conditions and severe bumps, the limit wrench can be pulled to secure the hook to protect the shock absorption system; 2. Slide adjustment handle: Lifting it upwards can release the limit, allowing the seat cushion to move back and forth; 3. Front lifting handle: Lifting it upwards can raise the front of the seat cushion, adjusting the angle and height of the seat cushion; 4. Rear lifting handle: Lifting it upwards can raise the rear end of the seat cushion; 5. Angle adjuster handle: Lifting it upwards releases the limit, allowing the backrest angle to be adjusted.
5
4
Share

How to Set Auto Lock for Ford Kuga?

Ford Kuga auto lock setting method introduction: First, the Ford Kuga needs to be shifted into P gear, turn the key to the ON position, keep all four doors closed, then press and hold the lock button until the indicator light on the dashboard flashes twice to complete the setup. Below is relevant information about auto lock: 1. Driving auto lock, also known as speed-sensing auto lock, is an electronic device that automatically presses the door lock button when the vehicle reaches a computer-set speed to prevent accidental opening of the door. That is, when the speed reaches a set value, the car lock automatically engages. The set value is generally factory-set, mostly between 10-20 km/h. 2. The purpose of the auto lock function is theft prevention. It allows the doors to lock quickly after driving starts, preventing door-pulling robberies during traffic jams or at red lights, providing a certain level of security. Its advantages include: protecting child passengers inside the car, preventing young children from opening the door handle while the car is in motion.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.