What is the speed limit for the middle lane on the highway?

1 Answers
ORiley
07/30/25 9:45am
The speed limit for the middle lane on the highway is 90-110 kilometers per hour. Here is a detailed introduction about vehicle speed: 1. Overview: Vehicle speed refers to the distance a vehicle travels per unit of time, abbreviated as speed, commonly measured in kilometers per hour or meters per second. Vehicle speed is one of the three parameters used to describe traffic flow and holds significant importance in traffic flow theory research. 2. Others: Vehicle speed can also generally refer to motor vehicle speed. To suit different purposes, vehicle speed is mainly categorized into spot speed, section speed, and design speed. Spot speed is the instantaneous speed of a vehicle passing a specific point on the road. Design speed is the speed set to determine the design indicators of various geometric elements of the road and to ensure their coordination.
Was this review help?
13
3
Share
More Forum Discussions

What is the normal pressure value of a car air conditioning system?

The normal pressure value of a car air conditioning system is 1.3-1.7 MPa. Here is some extended information about the normal pressure value of a car air conditioning system: 1. Car air conditioning refrigerant pressure: When the compressor is running at 1500-2000 rpm, the high-pressure exhaust pressure is around 1.5-2.0 MPa. 2. Normal operation of the air conditioning system: The low pressure should be between 1.0-2.5 bar, and the high pressure should be between 15-18 bar. 3. The normal range for detecting car air conditioning pressure: The high pressure should not exceed 1.7 MPa and should not be lower than 1.3 MPa.
18
3
Share

What is the suitable RPM for CVT starting?

The suitable RPM for CVT starting is as follows: 1. General situation: The engine can often reach 1200-1500 RPM at the moment of starting. 2. After the water temperature rises: It can maintain 2000-2500 RPM, which is the most suitable. Relevant information about CVT is as follows: 1. CVT: Usually refers to a type of automotive transmission, also known as a continuously variable transmission. 2. Transmission system: Traditional gears are replaced by a pair of pulleys and a steel belt. Each pulley is actually a V-shaped structure composed of two conical discs. The engine shaft is connected to the small pulley, which drives the large pulley through the steel belt. The conical discs can be tightened or expanded under the thrust of hydraulic pressure, squeezing the steel chain to adjust the width of the V-shaped groove.
5
3
Share

Can out-of-town vehicles undergo annual inspection outside their registered location?

Yes. The procedure for entrusting an annual inspection in a different location requires the vehicle owner to first apply to the original registration location before proceeding with the annual inspection. Moreover, an application must be submitted annually to the vehicle management office of the original registration location. If there are any unresolved traffic violations in the location where the vehicle is used, they must be dealt with in advance. Below are the relevant details: 1. Material requirements: To apply for an entrusted out-of-town annual inspection, you need to submit the vehicle's driving license and the original copy of the valid compulsory traffic insurance policy. If the application is handled by an agent, the agent's identity proof must also be provided. 2. Relevant regulations: Starting from September 1, 2018, cross-province annual inspections for small cars, trucks, and medium-sized buses have been fully implemented.
17
2
Share

What are the steps for engine start-stop parking?

The steps for engine start-stop parking are to press the brake—shift to neutral after coming to a complete stop—engage the handbrake (for electronic handbrakes, simply press the button). Below is an introduction to engine start-stop technology: 1. Concept: Engine start-stop technology automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light). When it's time to move forward again, the system automatically restarts the engine. 2. Working Principle: When the traffic light turns green, the driver presses the clutch, which activates the 'start-stop system' and quickly restarts the engine. The driver shifts gears, presses the accelerator, and the vehicle starts moving quickly. Supported by efficient battery technology and corresponding engine management programs, the start-stop system can function effectively even at lower temperatures, requiring only a brief warm-up process to activate.
19
5
Share

How to Turn Off the Auto Mode in a Car?

Auto stands for automatic air conditioning mode. Locate the AUTO mode button on the car's air conditioning control panel and press it lightly to turn off the "AUTO" air conditioning mode. AUTO in a car means automatic, and this button is typically used in the car's air conditioning system, referring to the automatic air conditioning mode, as opposed to the manual mode. When AUTO is pressed to turn on the air conditioning, it uses sensors inside the car to control the temperature of the air being blown out—hot air in winter and cold air in summer. It maintains a comfortable temperature inside the car. If the temperature becomes too high or too low, the air conditioning will automatically adjust the temperature and speed of the air coming out of the vents to regulate the interior temperature. In automatic air conditioning mode, the system will automatically adjust to the appropriate temperature and air speed inside the car.
12
4
Share

How Many Liters of Engine Oil Does the Volkswagen Passat Require?

The total engine oil capacity for the Volkswagen Passat is 4.5 liters. When adding oil, it should be done based on actual conditions, adding small amounts multiple times to avoid overfilling, which could damage the engine. Below is an introduction to automotive engine oil: Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. Additional information: 1. In engine oil labeled 5W40, the '5' indicates the oil's low-temperature fluidity—the smaller the number, the lower the ambient temperature it can be used in, and the better it protects the engine during cold starts. 2. The viscosity of lubricating oil is often indicated using SAE grade classifications. Oil grades are represented by a combination of two letters.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.