What is the speed limit for the left lane on the highway?

What to Do When the Edge of a Car Engine Belt Becomes Frayed?

Belt fraying may not seem like a big issue, but if the belt shows signs of cracking, it should be replaced immediately. It is recommended to visit a 4S shop to check which part is causing the belt to fray or wear out. Below is relevant information: 1. Specific cause: Friction. This is often due to an unbalanced pulley, so the verticality and balance of the pulley should be recalibrated. 2. Engine: An engine (Engine) is a machine that converts other forms of energy into mechanical energy, including internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines, steam engines), and electric motors. For example, an internal combustion engine typically converts chemical energy into mechanical energy.

10

2

Share

What is a Flood-Damaged Car?

Flood-damaged cars refer to vehicles that have been submerged in water. Based on the severity of the damage, they are categorized into the following three types: 1. Water depth exceeds the wheels and enters the interior. 2. Water depth exceeds the dashboard. 3. Water submerges the roof. Among these three categories, the first type is the most common and poses significantly less harm compared to the latter two. After repairs, the impact on daily use is minimal. However, for the latter two types—where water depth exceeds the center console or completely submerges the vehicle—even after repairs, serious hidden dangers remain. The hazards of flood-damaged cars are substantial, as they can easily lead to rusting of body components, shortened lifespan, and reduced safety performance. For example, water damage can cause corrosion and rusting of the vehicle's wiring, leading to sudden engine shutdowns or spontaneous combustion due to short circuits while driving.

18

5

Share

Why does the tire pressure warning light still come on after repairing a tire?

Tire pressure returns to normal, but a tire pressure reset is required afterward. Generally, after repairing the tire and inflating it to the correct pressure, long-pressing the tire pressure reset button will clear the warning light on the dashboard. If the reset fails, it usually indicates that there is still a tire with insufficient pressure. If all tires have adequate pressure, a diagnostic tool should be used to read the fault codes. Tire pressure, strictly speaking, refers to the air pressure inside the tire. In terms of car maintenance, the engine is the heart of the car—its failure means the end of the car's life—while tire pressure is like the car's blood pressure. The level of tire pressure plays a crucial role in the car's performance and power. Air pressure is the lifeblood of a tire. Both excessive and insufficient pressure will shorten the tire's lifespan. Insufficient pressure increases tire deformation, leading to cracks on the sidewalls and causing flexing movements, which generate excessive heat, accelerate rubber aging, fatigue the cord layers, and break the cords. It also increases the tire's contact area, speeding up wear on the tire shoulders. Excessive pressure overstretches the tire cords, reducing the tire's elasticity and increasing the load on the car while driving. In case of impact, it may cause internal cracks or blowouts. Additionally, high pressure accelerates tread wear and reduces puncture resistance.

5

1

Share

Where is the key sensing area for Cadillac?

When unlocking the car door with a mechanical key for this vehicle, you need to first pull the handle to the open position, then pry open the shell with the mechanical key to reveal the keyhole. Insert the key into the keyhole to unlock the door. If the keyhole is not visible on the driver's side door, it must be located beneath the decorative cover. The decorative cover installed over the keyhole serves both an aesthetic purpose and protects the keyhole from rust. Below is relevant information about Cadillac: 1. Model: The Cadillac ATSL is a sporty mid-size car, boasting 279 horsepower in its stock configuration without modifications, and features rear-wheel drive, making it a favorite among many consumers. 2. Handling: The Cadillac ATSL offers excellent handling and strong power. Additionally, the car achieves a 50:50 front-to-rear weight distribution, which helps prevent oversteer and understeer during cornering.

2

Share

How many times a year is the vehicle inspection required after 10 years?

The vehicle inspection standards after 10 years are as follows: Different vehicles have different annual inspection requirements. For commercial and cargo vehicles over 10 years old, the inspection is required twice a year; for small and micro non-commercial passenger vehicles over 10 years old, the inspection is required once a year, and for those over 15 years old, twice a year. Additional information: 1. Meaning of vehicle inspection: Vehicle inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates, equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety." 2. Exemption policy: Non-commercial small private passenger vehicles with 7 seats or fewer (including 7 seats) are exempt from on-site inspection for the first 6 years, but the owner still needs to pass the exhaust emission test within the specified period (usually 2 years) and apply for the inspection compliance mark at the vehicle management office, motor vehicle registration service station, or traffic police squadron, which must be displayed on the upper right corner of the vehicle's front windshield.

16

0

Share

Why does the Corolla have high RPM but can't pick up speed?

If the engine RPM is high but the speed does not increase, it must be a problem with the clutch or transmission, as the power generated by the engine is not being transmitted to the wheels. The engine's power is first transmitted to the clutch. If the clutch disc is severely worn or the clutch pressure plate spring is damaged, it can result in incomplete power output, causing a discrepancy between the power generated by the engine and the power output. If the transmission is not engaged in the correct gear, this issue can also occur. Below are specific details about the Corolla: 1. Powertrain: The Toyota Corolla is equipped with a 1.2T CVT powertrain, which aligns with the current trend in automotive powertrains—small-displacement turbocharged engines paired with CVT continuously variable transmissions, making it an excellent choice for daily commuting. The small-displacement turbocharged engine can deliver performance comparable to a 1.8L engine, though the 1.2T engine exhibits slight turbo lag. 2. Manual Transmission: If a manual transmission is used, the primary cause of this issue lies with the clutch or transmission. The clutch acts as an intermediary for power transfer between the engine and transmission. If the clutch friction disc is slipping, it can lead to power loss. Manual transmissions have high transmission efficiency, so if the clutch is not the issue, potential faults could be related to the output shaft or the engagement gears of the transmission.

17

1

Share

What is the speed limit for the left lane on the highway?

What to Do When the Edge of a Car Engine Belt Becomes Frayed?

What is a Flood-Damaged Car?

Why does the tire pressure warning light still come on after repairing a tire?

Where is the key sensing area for Cadillac?

How many times a year is the vehicle inspection required after 10 years?

Why does the Corolla have high RPM but can't pick up speed?

What is an automotive ECM

What is an Automotive Solenoid Valve?

What are the dimensions of the Ora Good Cat?

What to Do When a Car Won't Start Due to Insufficient Cylinder Pressure?