···
Log in / Register

What is the speed limit for the left lane in two same-direction lanes?

3 Answers
StLucille
09/05/25 5:50am
On highways with two lanes, the speed limits are 90-100 and 100-120 km/h. For three-lane highways, the limits are 60-90, 90-110, and 110-120 km/h. For four-lane highways, the limits are 60-90, 90-110, 90-110, and 110-120 km/h. Expressways are classified as high-grade roads. An expressway refers to a road designed to accommodate an annual average daily traffic volume of over 25,000 passenger cars, exclusively for high-speed separated lane driving with full access control. Here are supplementary essential conditions for expressways: 1. Designed only for high-speed motor vehicle traffic. 2. Equipped with multiple lanes and a central divider to completely separate opposing traffic flows. 3. Features grade-separated interchanges. 4. Fully enclosed with controlled access, allowing vehicles to enter/exit only at designated interchanges.
Was this review help?
2
4
Share
DeCarlos
09/17/25 6:14am
On a same-direction two-lane highway, the speed in the left lane generally ranges from 110 to 120 kilometers per hour, primarily serving as an overtaking lane. In my decades of driving experience, I've noticed that if you drive too slowly and block the left lane, not only will you be honked at and cursed, but you also risk causing rear-end collisions. After overtaking, you should promptly move back to the right lane to avoid delaying others. Urban roads have lower speed limits, such as 60 or 80 kilometers per hour, depending on road signs. During rainy or foggy conditions, you should reduce your speed by 20% due to poor visibility, which increases the risk of accidents. Safety comes first—speeding is one of the main causes of highway accidents. I always remind my friends to obey speed limits and not risk saving a few minutes.
Was this review help?
10
2
Share
Expand All
VanAbel
10/31/25 6:45am
When driving, it is essential to strictly control your speed. The speed in the left lane should not be lower than that in the right lane, but must never exceed the speed limit. On highways, the general speed limit is 120 kilometers per hour, so I maintain around 100 km/h when overtaking—safe and reliable. As a female driver who prefers steady driving, I often emphasize left-lane speed management: driving too slowly can block traffic, while driving too fast may lead to loss of control. When traveling with family, I pay attention to maintaining a safe distance, especially during high-speed changes. Smooth acceleration when overtaking from the left lane ensures rear-seat passengers remain comfortable. Remember to check navigation app alerts for speed limits and reduce speed by 20% in rainy conditions to prevent skidding. Regularly check tire pressure and brake systems to ensure smooth driving.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

How much can the insurance company compensate for a water-damaged car?

The specific compensation amount depends on the policy coverage and the assessment results of the vehicle damage. Below is relevant information about auto insurance: Introduction: Auto insurance, also known as motor vehicle insurance or car insurance, covers personal injury or property damage caused by natural disasters or accidents involving motor vehicles. Types of Auto Insurance: Auto insurance generally includes compulsory traffic insurance and commercial insurance. Commercial insurance consists of basic coverage and additional coverage. Basic coverage is divided into vehicle damage insurance, third-party liability insurance, comprehensive theft insurance (theft insurance), and passenger liability insurance (driver liability insurance and passenger liability insurance).
17
2
Share

How to Deal with Small Yellow Spots on White Car Paint?

Here are the methods to deal with small yellow spots on white car paint: 1. First, prepare an automotive paint iron remover. Clean the car surface thoroughly and dry it with a towel. Then, spray the iron remover evenly on the paint surface. Wait for 3-5 minutes; the remover will react chemically with the yellow rust spots on the paint, turning them purple. At this point, it's best to wipe the surface with a sponge. 2. After wiping with the sponge, rinse the car body with clean water. If any yellow rust spots remain, repeat the above steps once. 3. If yellow rust spots still persist, use the "magic tool"—clay bar (also known as detailing clay). When using the clay bar, make sure to soak it in water to soften it. Keep the car body wet, and never rub it dry. You can use car wash soap for additional lubrication, wiping while spraying water on the car body with a spray bottle. Generally, stains will come off after a few wipes.
19
0
Share

How to Repair Car Window Film?

Generally, it is not easy to repair damaged car window film, and it is recommended to replace it with a new one. During daily use, proper maintenance of the car window film is necessary to avoid damage that could affect the vehicle's aesthetics. Below are the acceptance criteria for car window film installation: 1. After installation, the owner should first verify whether the correct film material has been used. If any discrepancies are found, address them promptly to avoid further issues. 2. Inspect the windshield: there should be no more than one crease on the front windshield and no more than one on the rear windshield. Sit in the driver's seat and check the film's transparency. The view through the front windshield should not appear blurry or have color distortion. 3. Check for water bubbles in the film. Any residual water should be promptly removed. To inspect for bubbles, observe from both sides of the glass for better clarity. 4. There should be no noticeable scratches on the filmed glass, as they can affect the car's appearance. Additionally, no new scratches should be present on the side window seals. 5. If the glass cracks during or within 24 hours after the film installation, report the issue immediately to the car detailing shop or 4S store for timely resolution.
13
3
Share

What problems might occur after a flooded car is repaired?

Interior moisture can easily lead to mold and odors; wiring harnesses and computers are prone to corrosion, which may cause malfunctions later. Here is relevant information: Severity: The severity of a flooded car depends on the height of water submersion and whether the vehicle was started in water. Below the seats: If the water only reached below the seats, this height does not affect the vehicle's air intake, fuse box, or dashboard. After thorough cleaning, the impact on the vehicle is relatively minor. Cleaning: During cleaning, it is necessary to replace the transmission fluid, engine oil, and brake fluid, as well as clean and maintain the vehicle's brake system, exhaust pipe, and catalytic converter to further reduce the impact of flooding on the vehicle's subsequent use.
4
4
Share

What are the effects of a car being exposed to rain all night?

The effects of a car being exposed to rain all night are as follows: The car paint may be corroded: In some heavily polluted areas, the rain is mostly acid rain, so exposure to rain is equivalent to exposing the car paint directly to acid rain, which can corrode the paint, leading to rain marks, oxidation, and even cracking. Moisture and mold: Compared to sunny days, the interior of the car is more prone to moisture and mold after rain. At the same time, rainwater can seep into the seams of the car body, causing iron parts to rust and corrode easily. Therefore, after the rain stops, accumulated moisture should be removed as soon as possible to prevent mold growth. Bacterial growth: The more humid the environment, the faster bacteria multiply, especially during the rainy season. Places that are usually dry can be ventilated to maintain air circulation, but during the rainy season, avoid opening windows for ventilation, as this can lead to a rapid multiplication of bacteria inside the car. Rainwater entering the headlights: Water entering the headlights can affect their brightness, and excessive water may damage the headlights. It can also alter the direction of light refraction, posing a safety hazard while driving.
1
1
Share

Does driving through water affect the car?

Driving through water does affect the car. Headlights: Water can easily enter the headlights when driving through water, forming condensation inside the lights and affecting the light's transmission. Vehicle chassis: The chassis can be washed by dirty water, causing debris to accumulate in the gaps under the chassis or body. If not cleaned promptly, this debris can lead to rust on the chassis. Additionally, dead branches, leaves, and discarded plastic bags may wrap around the bearings and suspension, creating safety hazards. Brake pads: After driving through water, it's essential to remove moisture from the brake pads, especially for cars with drum brakes. Otherwise, the vehicle may lose braking ability after driving through water, leading to serious dangers or accidents.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.