What is the speed limit for motor vehicles within the factory premises?
4 Answers
Here are the general speed limit regulations for factories: 1. When motor vehicles are driving on the main roads within the factory premises without speed limit signs, the speed should not exceed 30km/h, and on other roads, it should not exceed 20km/h. 2. The speed limit requirements for motor vehicles driving in the following locations, sections, or encountering special circumstances should comply with: (1) At crossings, intersections, loading and unloading operations, densely populated pedestrian areas, downhill slopes, places with warning signs, or when turning or making a U-turn, the maximum speed for trucks carrying flammable, explosive, or other dangerous goods should not exceed 15km/h. (2) On roads covered with ice, snow, or water; when visibility is less than 30m in bad weather, the maximum speed should not exceed 10km/h. (3) When entering or exiting factory buildings, warehouses, workshop gates, parking lots, gas stations, weighing scales, hazardous areas, production sites, reversing, or towing damaged vehicles, the maximum speed should not exceed 5km/h. 3. When visibility is less than 5m or less than 10m with a maximum road gradient of more than 6% in bad weather, driving should be stopped. 4. Fire trucks, engineering rescue vehicles, and ambulances on duty are not subject to the prescribed speed limits.
When driving within factory premises, the speed limit is generally controlled between 10 to 20 kilometers per hour, depending on the specific site environment and safety regulations. From my years of experience, driving faster can easily lead to accidents because factory areas often have workers moving around, equipment stacked, and narrow turns. Once, while driving inside, I saw someone hurriedly carrying items, and fortunately, I was maintaining a low speed, which helped avoid a collision. Remember, driving faster not only increases the risk of accidents but can also damage goods or machinery. Safety always comes first, so get into the habit of taking it slow when entering factory areas, observing road conditions, and being extra cautious during rainy days or at night when visibility is poor. Don’t forget to turn off the lights and engine when parking—these good habits make driving smoother.
Speed limits for vehicles within the factory premises must not be exceeded, typically capped at just 15 kilometers per hour—I learned this through firsthand experience. Every time I enter the factory zone, road signs clearly indicate the speed limit; just follow them and never rush. The roads are often slippery due to oil spills or uneven surfaces, making it easy to skid if not careful. Additionally, with forklifts and pedestrians frequently appearing, speeding leaves no time to react. I make it a point to slow down and remind myself to frequently check blind spots using the rearview mirrors. New drivers should take time to familiarize themselves with the routes instead of just hurrying—safe driving isn’t just a rule, it’s basic courtesy that protects everyone. Always inspect tires and brakes before driving to ensure the vehicle is in good condition and prevent accidents.
There are strict speed limits within the factory premises, with most areas capped at 15 kilometers per hour, as per safety operation regulations. I strictly adhere to these limits to avoid fines or warnings. In practice, it's essential to constantly monitor the speedometer and warning signs near factory gates. Driving too fast may trigger automatic recording by the surveillance system and negatively impact work evaluations. Slowing down is the safer approach, especially when yielding to pedestrians or machinery at turns. Weather conditions must also be considered, with speeds reduced below 10 km/h during rain or snow. Developing such habits can reduce accident probabilities by 80%, ensuring operational efficiency.
