···
Log in / Register

What is the speed limit for large buses on highways?

4 Answers
DeJohnny
07/30/25 2:22am

Highways generally have a speed limit of 120 km/h, so the speed of large buses is usually between 100-110 km/h. Lane speed limits: Highways should indicate the speed limits for each lane, with the maximum speed not exceeding 120 km/h and the minimum speed not lower than 60 km/h. Vehicle speed limits: On highways, the maximum speed for small passenger vehicles should not exceed 120 km/h, while other motor vehicles should not exceed 100 km/h, and motorcycles should not exceed 80 km/h. If the speed limit indicated by road signs differs from the above lane speed regulations, drivers should follow the speed limit indicated by the road signs.

Was this review help?
16
4
Share
EmeryMarie
08/15/25 8:29am

The speed limit for large buses on highways is generally 100 kilometers per hour, which is a common regulation. I always strictly adhere to it when driving because buses carry many passengers, and higher speeds increase the risk of accidents. For example, on the highway, if you exceed the speed limit, the braking distance becomes longer. If a car suddenly stops ahead, there's simply no time to react. Additionally, buses have a high center of gravity, making them more prone to rollovers on curves or during windy conditions. Speed limits may vary in different sections, such as mountainous areas or during rainy weather, where it might drop to around 80 km/h, so it's important to pay attention to road signs. In terms of fuel efficiency, maintaining a speed within 100 km/h results in lower fuel consumption, saving some money. I recommend that drivers regularly check tires and brakes to ensure safe driving within the speed limit. Passenger safety is the top priority, so don't risk speeding just to save time.

Was this review help?
15
1
Share
Expand All
MacMaci
10/21/25 5:56am

The speed limit for large buses on highways is typically 100 kilometers per hour, primarily based on safety considerations. Buses are heavy with strong inertia, and their stability decreases at high speeds, increasing the likelihood of accidents. Having driven buses for many years, I've found that maintaining speeds within 100 km/h keeps the vehicle more stable and enhances passenger comfort. In adverse weather conditions like rain or fog, the speed limit may be reduced to 90 or 80 km/h, requiring timely adjustments. Additionally, speeding can result in fines and demerit points, with severe cases leading to license suspension. Regular vehicle maintenance, such as checking the braking system and tire wear, ensures reliable operation within the speed limit. Safe driving is not only a responsibility but also helps avoid unnecessary troubles.

Was this review help?
10
0
Share
Expand All
ArielLynn
12/04/25 6:22am

When driving a large bus on the highway, I know the speed limit is 100 km/h. At this speed, the ride is smooth, and passengers are less likely to get carsick. I remember once when I was in a hurry and exceeded the speed a bit, the bus shook violently, and an aunt in the back seat even vomited. Since then, I've strictly kept the speed under 100. On highways with heavy traffic, lower speed limits for buses are safer, especially at night or on long downhill sections. It also saves fuel—moderate speeds lead to lower fuel consumption. Regular maintenance ensures the brakes are responsive, and never overlook minor issues.

Was this review help?
9
3
Share
Expand All
More Forum Discussions

Can the Electronic Parking Brake Be Used for Emergency Braking When the Car's Brakes Fail?

When the car's brakes fail, the electronic parking brake cannot be used for emergency braking. Relying solely on the electronic parking brake for braking is relatively inefficient. It is recommended to use manual mode to downshift and utilize the engine's resistance for cooperative braking. The mechanical parking brake operates on the lever principle, controlling the cable to press the rear brake pads for parking. However, due to the limited force of the cable, it cannot effectively brake in emergency situations. Unlike the mechanical parking brake, the electronic parking brake involves a two-step process during braking. At higher speeds, it controls the ABS through the car's EPC system, applying intermittent electronic braking with a force slightly less than emergency braking. Therefore, when using the electronic parking brake for emergency braking, you may hear a clicking sound. Generally, braking with the electronic parking brake requires a longer distance, and it should not be used as an emergency brake.
20
4
Share

How to Disinfect Germs in the Car?

Methods for disinfecting germs in the car: 1. Keep the car floor, inner walls, steering wheel, door handles, seats, and other areas clean. Wipe these surfaces with a disinfectant containing effective bromine once a day; 2. Change and wash seat covers frequently. Soak them in a disinfectant containing effective bromine for 30 minutes weekly, then rinse with clean water, dry, and reuse; 3. If an infectious patient is found in the car, disinfect immediately after the patient leaves using the above methods; 4. During an epidemic, spray the disinfectant on surfaces several times a day during breaks between rides; 5. In seasons when air conditioning is not needed, open windows for ventilation, especially for taxis that require air conditioning. Try to open windows for ventilation when there are no passengers.
4
0
Share

What are the body dimensions of the Cavalier?

The body dimensions of the Cavalier are 4474mm in length, 1730mm in width, and 1471mm in height, with a wheelbase of 2600mm. The Cavalier is a compact sedan under SAIC-GM Chevrolet, equipped with an Ecotec 1.0T dual-injection turbocharged engine and a 6-speed wet dual-clutch intelligent start-stop transmission. In terms of exterior design, the Cavalier features Chevrolet's signature dual-layer front grille with a "Gale" gradient texture inside, adding a touch of dynamism compared to current Chevrolet models. The headlight assembly is adorned with chrome trim and an innovative double L-shaped LED daytime running light strip, which comes as standard across all models.
17
2
Share

What are the symptoms of a faulty oxygen sensor in a motorcycle?

Symptoms of a faulty oxygen sensor in a motorcycle: The engine experiences decreased power and increased fuel consumption. The oxygen sensor is a very important component that detects the oxygen content in the exhaust and feeds the signal back to the ECU, allowing the ECU to adjust the air-fuel ratio. Low-end motorcycles do not have oxygen sensors; only some motorcycles equipped with fuel-injected engines are fitted with oxygen sensors. The oxygen sensor is installed in front of and behind the three-way catalytic converter. The oxygen sensor in front is called the front oxygen sensor, while the one behind is called the rear oxygen sensor. The main function of the rear oxygen sensor is to detect whether the three-way catalytic converter has failed.
20
1
Share

How should pure electric vehicles be maintained?

Maintenance methods for pure electric vehicles: mainly involve daily care for the battery pack and motor, and keeping them clean. First, perform an exterior inspection, including checking the steering wheel, seat belts, various switches inside the vehicle, and whether the combination instrument is functioning normally. Verify the functionality of the lights and horn, the aging degree of components like the wipers, and the inflation condition of the tires along with any damage or wear. For electric vehicles, it's necessary to check the antifreeze, brake fluid, and windshield washer fluid. Electric vehicles also use antifreeze, but unlike traditional vehicles, the antifreeze is used to cool the motor and should be replaced according to the manufacturer's specified intervals, typically every 2 years or 40,000 kilometers. The type of antifreeze is exactly the same as that used in traditional cars. Gear oil (transmission oil) is a fluid that needs to be replaced more frequently in electric vehicles, but the replacement intervals vary by manufacturer.
11
1
Share

How is the battery charged?

The charging method of the battery: Connect the positive terminal of the battery to the positive terminal of the power supply, and the negative terminal of the battery to the negative terminal of the power supply. Then, the initial charging is carried out in two stages: First, charge with the initial charging current until the electrolyte releases bubbles and the single-cell voltage rises to 2.3 to 2.4V. Then, reduce the current to half of the initial charging current and continue charging until the electrolyte releases intense bubbles and the voltage remains stable for 3 consecutive hours. The total charging time is about 45 to 65 hours. During the charging process, the temperature of the electrolyte should be frequently measured. Use methods such as halving the current, stopping charging, or cooling to control the temperature between 35 to 40 degrees Celsius. If the specific gravity of the electrolyte does not meet the requirements after the initial charging is completed, adjust it with distilled water or electrolyte with a specific gravity of 1.4. After adjustment, charge for another 2 hours until the specific gravity meets the requirements.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.