What is the speed limit for internal vehicles entering and exiting workshop gates?

What Are the Consequences of Not Repairing a Damaged Transmission Flywheel?

The consequences of not repairing a damaged transmission flywheel include: 1. Hazard One: Wear on the flywheel can lead to loss of balance. 2. Hazard Two: It can cause crankshaft fatigue and longitudinal cracks in the flywheel housing. 3. Hazard Three: Difficulty in starting the engine, gear noise, or damage to the starter motor. There are many reasons for flywheel damage, as detailed below: 1. Assembly Components: Poor balance in the crankshaft, flywheel, and clutch assembly. 2. Drive Shaft: Poor balance in the drive shaft. 3. Connection Failure: Failure in the connection between the flywheel and the engine block. 4. Transmission Imbalance: Looseness in the first and second shaft bearings of the transmission, leading to transmission imbalance. 5. Quality Issues with the Gear Itself: Gears are typically made of alloy materials and produced by automotive parts manufacturers on specialized production lines. Factors such as material quality, equipment, processes, and inspection during this process can result in substandard or degraded gear quality. Such gears, when assembled, have poor quality and a significantly reduced lifespan.

7

0

Share

Where to Add Windshield Washer Fluid for Mercedes-Benz C260L?

For the Mercedes-Benz C260L, the windshield washer fluid is added at the blue filler port located at the upper right when the engine hood is opened. Below are detailed introductions about the Mercedes-Benz C260L: 1. Features: The new model has been upgraded with a digital dashboard and also includes remote start functionality and automatic parking, making it more practical for drivers. 2. Powertrain: The powertrain has been changed from a 2.0T to a 1.5T hybrid system, resulting in slower acceleration compared to the older model. However, if used primarily as a city commuter, it remains within an acceptable range. 3. Interior: The Mercedes-Benz dashboard is quite distinctive, with gear shifts located on the steering wheel, which is very suitable for novice drivers. In terms of space, the C260L has about 8 cm more rear seat space than the C260, roughly the length of a fist.

10

1

Share

Where is the car safety lock switch located?

Car child lock, also known as door lock child safety, is set on the rear door lock of the car. After opening the rear door, there is a small lever (safety mechanism) below the door lock. Switch it to the end with the child icon, and then close the door. At this time, the door cannot be opened from the inside, but only from the outside. Introduction to safety lock: 1. Introduction: The child safety lock is an active safety device designed to ensure the safety of child passengers. If the child safety lock is engaged, the central locking system's electric unlock will also be disabled. The door can only be opened from the outside, and the interior door handle will temporarily lose its function. 2. Switch types: Currently, child safety locks in cars come in two types: rotary knob and toggle switch. Comparatively, the toggle switch is simpler to operate, while the rotary knob is slightly more complicated but offers higher safety. For central locking systems or automatic locking while driving, they do enhance the safety of rear-seat children to some extent. However, it's important to note that they can still be unlocked via interior switches, so engaging the child safety lock is the only way to ensure complete peace of mind while driving.

8

1

Share

Is it normal for a motorcycle engine to get very hot after riding for a while?

It is normal for a motorcycle engine to get very hot after riding for a while. Since the engine is a high-temperature component with an internal high-temperature environment, the exterior will become very hot. The maximum temperature inside the combustion chamber can reach around 2000 degrees Celsius, and the heat dissipating from it naturally makes the engine extremely hot. Below is some related information about engines: 1. Introduction: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy. 2. Types: Includes internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc.

15

2

Share

What are the skills for reversing into the garage in Subject 2?

Skills for reversing into the garage: After getting into the car, the driver should first adjust the seat and rearview mirrors, fasten the seat belt, then shift the car into reverse gear, release the parking brake lever, and start reversing at idle speed while observing the garage through the right rear window. When the black edge of the right rear window aligns with the right boundary line of the garage, turn the steering wheel steadily to the right to the limit position. After the car enters the garage, the driver should look back at the left rearview mirror. When the entire left boundary line of the garage appears, immediately straighten the steering wheel. When the left door handle is level with the bottom line of the garage as seen in the left rearview mirror, stop immediately. Points deduction items for reversing into the garage are as follows: Not following the prescribed route or sequence: deduct 100 points; vehicle body crossing the line: deduct 100 points; failing to reverse into the garage: deduct 100 points; stopping midway: deduct 100 points. Subject 2 has a full score of 100 points, with evaluation criteria for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is passed if the following conditions are met: ① For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required.

20

1

Share

How to Compensate for Scratching Someone Else's Car Paint?

Scratching someone else's car paint is considered a traffic accident. The best approach is to file an insurance claim, though private settlement is also an option. The specific handling procedures are as follows: 1. Report the incident by phone: First, the customer can call the insurance company's hotline to report the accident. It is necessary to promptly provide the policy number, the name of the insured, the name of the driver involved, contact information, license plate number, time and location of the incident, details of the accident, and the extent of the damage to the customer service representative. 2. Insurance company processing: The insurance company's customer service center will dispatch an adjuster to the nearest location. The adjuster will contact the customer within 3 minutes to understand the circumstances of the accident. Typically, they will arrive at the scene within 30 minutes in urban areas and about an hour in suburban areas. They will then take photos of the scene for evidence collection, gather customer information, and assist with rescue and cleanup efforts. 3. Determine liability: The case will be filed, and liability for the accident will be determined. For incidents covered under the insurance policy, the adjuster will complete the system entry for the investigation, estimate the damage, and register the case. The insurance company will then further review the case. 4. Compensation plan: For claims approved after review, the case will be closed. The compensation receipt and closing report will be printed and forwarded to the payment department for processing the compensation.

5

2

Share

What is the speed limit for internal vehicles entering and exiting workshop gates?

What Are the Consequences of Not Repairing a Damaged Transmission Flywheel?

Where to Add Windshield Washer Fluid for Mercedes-Benz C260L?

Where is the car safety lock switch located?

Is it normal for a motorcycle engine to get very hot after riding for a while?

What are the skills for reversing into the garage in Subject 2?

How to Compensate for Scratching Someone Else's Car Paint?

How to Check Traffic Violation Information for Vehicles Not Registered Under Your Name?

How Long is the Validity Period of a Motorcycle License?

Does a Broken Lower Control Arm Bushing Require Complete Replacement?

What is the function of the automotive running gear system?