What is the speed corresponding to each gear of the Kawasaki NINJA400?

How many turns does the steering wheel of a C1 car have in total?

C1 car's steering wheel turns one and a half times when fully locked. What is a C1 driver's license: A C1 driver's license is one of the codes for motor vehicle driver's licenses. The permitted driving scope of a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. Application age: The minimum age requirement for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 and above must pass tests on memory, judgment, and reaction abilities. C1 driver's license permitted vehicle types: The permitted driving scope of a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. C1 driver's license cannot drive: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery vehicles, trolleybuses, and trams. Additionally, a C1 license cannot drive vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.

9

4

Share

How to Reset the Maintenance Reminder on a Lexus ES?

Lexus ES maintenance reminder reset steps are as follows: 1. First, turn off the ignition switch. 2. Then press and hold the trip meter reset button on the car dashboard. 3. Next, turn the ignition switch to the ON position while keeping the button from step 2 pressed. 4. Finally, the odometer will start counting down. When the display shows 0000.0, immediately release the button to complete the maintenance light reset. The maintenance light is a reminder function set by the manufacturer to alert the owner for scheduled maintenance at certain mileage or time intervals, displayed via the instrument panel, screen message, or indicator light. Resetting the maintenance light means clearing the reminder information after servicing, essentially resetting the alert. Steps: (1) With the engine off, press and hold the short-distance trip meter reset button below the tachometer. (2) Turn the ignition switch to the ON position and release the trip meter reset button. The display will show "SERVICE". (3) Pull out the minute button on the clock and turn it clockwise. The mileage will appear on the display. (4) Turn off the engine to reset the reminder. (5) Turn the ignition switch to the ON position again, and the "SERVICE" message will disappear.

17

1

Share

What causes the 2005 Fit to shake when starting?

First, remove the front bumper, then unscrew the headlight bolts to detach the headlights. Below is an introduction to the Fit: 1. Vehicle Design: The third-generation Fit (FIT) adopts the "Exciting-H Design" as its overall design concept, featuring Honda's latest family-style front face design called "Solid Wing," where the front grille and headlights are integrated to highlight a sharp and dynamic look. The side profile incorporates a unique and sporty "Blade" dual waistline design, creating an eager-to-move-forward momentum. The tension-filled rear design, paired with LED taillights, presents a more premium texture. 2. Configuration: The third-generation Fit (FIT) is the first to be equipped with Honda's new Earth Dreams Technology engine. The all-new 1.5L direct-injection DOHC i-VTEC engine delivers a maximum power of 96kW/6600rpm and a maximum torque of 155N·m/4600rpm, ranking first in its class for performance. Paired with the new CVT transmission, the third-generation Fit (FIT) achieves the lowest fuel consumption in its class at just 5.3L per 100km.

15

0

Share

What is tested in the driving license test subject 1?

The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" clearly stipulates that the content of the subject 1 test includes: road traffic safety laws, regulations, and rules; traffic signals and their meanings; knowledge of safe driving and civilized driving; safe driving knowledge under conditions such as highways, mountainous roads, bridges, tunnels, nighttime, adverse weather, and complex road conditions; emergency handling knowledge in situations like tire blowouts, steering failure, and brake failure; general structure of motor vehicles, common knowledge of main safety devices, basic knowledge of daily inspection and maintenance; basic knowledge of self-rescue and first aid after traffic accidents, as well as knowledge of common hazardous materials. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the subject 1 test consists of 100 questions, divided into single-choice questions and true/false questions, with each question worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the test, the system will automatically submit the test and end the exam. Subject 1, also known as the theoretical test or driver's theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer with a time limit of 45 minutes. Subject 1 test precautions: Candidates should pay attention to their attire, no slippers are allowed, electronic devices and bags are not permitted in the examination room, bring an ID card, and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in a locker before entering the examination room. Upon entering, the identity verification station will assign a seat. After finding the seat, start the test, ensure the camera is aligned with yourself, and adhere to exam discipline. If failed once, there is a retake on the same day; if failed again, pay to reschedule. After completion, queue to receive the score report and sign it; unsigned reports are considered invalid. There is no limit to the number of times the subject 1 test can be scheduled. Each subject can be taken once, and if failed, a retake is allowed once. If the retake is not taken or still failed, the test is terminated, and the applicant must reschedule. Subjects 2 and 3, however, have only 5 attempts. Subject 2 and 3 tests should be scheduled at least 10 days apart. If the subject 3 safe and civilized driving knowledge test is failed, the passed road driving skills test scores remain valid. There are 3 subjects in the driving test: subject 1, subject 2, and subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; subject 2 refers to the field driving skills test; subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after subject 3, so it is commonly referred to as subject 4. However, in official terms (i.e., the Ministry of Public Security Order No. 123), there is no such thing as subject 4.

10

1

Share

What brand of tires does the Bluebird use?

The Bluebird uses Bridgestone tires. The functions of tires are: to transmit driving force, braking force, and steering force for vehicle operation through the tires, to support vehicle loads, and to mitigate and absorb vibrations and impacts during driving. Taking the 2021 Bluebird as an example, it belongs to the compact car category, with body dimensions of: length 4683mm, width 1780mm, height 1465mm, a wheelbase of 2700mm, and a fuel tank capacity of 50 liters. The 2021 Bluebird is equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 122PS, a maximum power of 90kW, a maximum torque of 155Nm, and is paired with a continuously variable transmission.

19

3

Share

What Causes the Engine Fault Light to Illuminate and Then Turn Off?

The reason the engine fault light illuminates and then turns off is: excessive carbon deposits in the throttle or engine internals, causing an imbalance in the air-fuel mixture ratio, which triggers the engine fault light. If the fault does not recur within several work cycles, the light will turn off. Solutions for the engine fault light illuminating and then turning off: 1. Replace the oxygen sensor; 2. Replace the catalytic converter; 3. Tighten or replace the fuel tank cap; 4. Replace the thermostat; 5. Replace the ignition coil; 6. Replace the mass airflow sensor; 7. Perform regular maintenance according to the vehicle's maintenance schedule.

19

2

Share

What is the speed corresponding to each gear of the Kawasaki NINJA400?

How many turns does the steering wheel of a C1 car have in total?

How to Reset the Maintenance Reminder on a Lexus ES?

What causes the 2005 Fit to shake when starting?

What is tested in the driving license test subject 1?

What brand of tires does the Bluebird use?

What Causes the Engine Fault Light to Illuminate and Then Turn Off?

What are the reasons for the weak acceleration of Jianghuai Junling?

How to Jump Start a Car from Another Car?

How to Turn Off a BMW When Parking?

What are the causes of engine shaking during cold starts?