What is the specification of the Kia K3 spare tire?

1 Answers
LaAliyah
07/29/25 11:40pm
The Kia K3 spare tire size is 195/65-R15, which is a non-full-size spare tire. The diameter and width of this spare tire are slightly smaller than the other four tires, so it can only be used as a temporary replacement and should only be used on non-driving wheels, with a maximum speed not exceeding 80 km/h. Precautions for using the spare tire: 1. Regularly inspect the spare tire. During routine maintenance or before long-distance trips, few car owners inspect the spare tire, and some unprofessional repair shops often overlook this. Spare tire inspection mainly involves checking tire pressure and for any wear or cracks. The tire should be replaced as soon as possible if the tread wear reaches the wear indicator line. If there are fine cracks on the tire sidewall, it should not be used for long-distance or high-speed driving, as the sidewall is thinner and prone to blowouts at high speeds. 2. Do not store oil products with the spare tire. The main component of tires is rubber, which is most vulnerable to erosion by various oil products. Car owners often store lubricants and other oil products in the trunk, and if these oils come into contact with the tire, they can cause swelling and corrosion, significantly reducing the tire's lifespan. If the tire is contaminated with oil, it should be promptly cleaned with a neutral detergent. 3. The lifespan of a spare tire is about 4 years. Many car owners believe that as long as the spare tire is kept in the trunk unused, it can last for a long time, which is incorrect. It often happens that when a car owner needs to replace a flat tire, they find that the spare tire, after years of storage, has severely aged and is no longer usable. Since tires are rubber products, prolonged storage can lead to aging, typically within about 4 years. Therefore, the spare tire should be replaced after 4 years.
Was this review help?
19
1
Share
More Forum Discussions

How to Protect Outdoor Vehicles from Hail?

There are several methods to protect outdoor vehicles from hail: 1. Park the car under an eave: If conditions allow, park the car under an eave. However, the effectiveness depends on the wind direction. If you're lucky, your car might remain unscathed after a hailstorm. If you're unlucky and encounter unfavorable wind conditions, especially strong winds, parking under an eave may not be very effective. 2. Car hail protection cover: There is now a product called a car hail protection cover, which looks like a car cover but can be inflated. After covering the car and inflating it, even large hailstones hitting it would feel like hitting cotton. 3. Quilt: If your car is parked at home when hail starts, don't hesitate to go inside and grab a quilt. However, hailstorms are usually accompanied by strong winds, so remember to bring some ropes to secure the quilt to the car.
5
3
Share

How many kilometers should a car run before replacing brake pads?

It depends on the car's mileage. Generally, they should be replaced every 50,000 kilometers. Here are methods to check if a car's brake pads need replacement: 1. Thickness - A new brake pad is typically about 1.5cm thick. With continuous friction during use, the thickness gradually wears down. Professional technicians recommend that when visual inspection shows the brake pad thickness has reduced to about 1/3 of the original (approximately 0.5cm), the owner should increase self-inspection frequency and prepare for replacement. 2. Listen for sounds - If a metallic scraping sound (like "iron rubbing iron") accompanies light braking, the brake pads must be replaced immediately. This indicates the wear indicators on both sides of the brake pads are directly contacting the brake disc, proving the pads have exceeded their limit. In such cases, the brake disc should also be inspected during replacement, as this sound often means the disc is already damaged. Simply replacing the pads may not eliminate the noise, and severe cases may require disc replacement. 3. Feel the braking force - As pads thin, braking efficiency decreases. You'll need to press the pedal deeper to achieve the same braking effect that previously required light pressure. When the initial braking response weakens noticeably (many drivers describe this as "soft brakes" or reduced stopping power), it's time to check if the pads need replacement.
1
3
Share

What to Do When the Gear Exclamation Mark Appears on the Dashboard?

Dashboard gear exclamation mark is the transmission system warning light. TCU, which stands for Transmission Control Unit, refers to the automatic transmission control unit. This function enables automatic transmission control, making driving simpler. The appearance of this symbol indicates an abnormality in the transmission. If this light comes on while driving, you should stop driving immediately and seek professional assistance at a 4S shop as soon as possible. Generally, only cars equipped with automatic transmissions have this light. Cars with manual transmissions do not have this light because manual transmissions lack computers and sensors, making them less prone to malfunctions.
7
3
Share

What Causes the Oil Warning Light to Illuminate When the Engine Overheats?

Engine oil warning light illumination during engine overheating is caused by excessively high engine temperature, insufficient oil level, sensor malfunctions, and other factors. Below is the classification of automotive engine types: Classification by Fuel Type: Internal combustion engines can be categorized into gasoline engines and diesel engines based on the fuel used. An internal combustion engine using gasoline as fuel is called a gasoline engine, while one using diesel is called a diesel engine. Gasoline and diesel engines each have distinct characteristics: gasoline engines feature higher rotational speeds, lighter weight, lower noise levels, easier starting, and lower manufacturing costs; diesel engines have higher compression ratios, greater thermal efficiency, and better fuel economy and emission performance compared to gasoline engines. Classification by Cooling Method: Internal combustion engines can be divided into water-cooled engines and air-cooled engines based on their cooling methods. Water-cooled engines utilize circulating coolant within the cylinder block and cylinder head water jackets as the cooling medium, whereas air-cooled engines use air flowing between the cooling fins on the outer surfaces of the cylinder block and cylinder head as the cooling medium. Water-cooled engines provide uniform cooling, reliable operation, and effective cooling performance, making them widely used in modern automotive engines.
8
3
Share

Can I Still Take the Test After Failing Subject 2 Five Times?

You cannot retake the test after failing Subject 2 five times. Here are the precautions for taking Subject 2: 1. Reverse Parking: The main points for deduction in reverse parking include pressing the line while reversing, the car not entering the parking space, exceeding the time limit, and not following the prescribed route. Reverse parking must be completed within 210 seconds; exceeding the time limit results in failure, and not following the sequence also leads to failure. Pay attention to the 30cm margin when reversing. 2. Parallel Parking: The main points for deduction in parallel parking involve the turn signal, the 30cm margin, and pressing the line. 3. Right-angle Turn: The main points for deduction in the right-angle turn are the turn signal and pressing the line. Operating the turn signal incorrectly after entering the test area deducts 10 points.
7
1
Share

What are the reasons for a battery not charging?

The reasons for a battery not charging include: dried-up electrolyte in the battery, broken plates, short-circuited plates, etc. The most common reason is plate sulfation, which hinders the normal flow of electrons, leading to a decrease in battery capacity, inability to function properly, and gradual aging. In this case, the battery needs to be replaced. The method for removing the battery is as follows: 1. The battery is located in the engine compartment. First, open the compartment and locate the battery. 2. Remove the battery terminal protective cover and the nuts on the fixed bracket. 3. First disconnect the negative terminal, then remove the positive terminal. The negative terminal is disconnected first to avoid short circuits, as it is connected to the vehicle body. 4. After removing all the fixing screws on the battery, the old battery can be taken out.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.