What is the special meaning of CX30?

What are the differences between BMW 318 and BMW 320?

The differences between BMW 318 and BMW 320: 1. Different maximum horsepower: BMW 318 has a maximum horsepower of 136ps; BMW 320 has a maximum horsepower of 184ps. 2. Different engines: BMW 318 uses a 1.5T three-cylinder turbocharged engine; BMW 320 uses a low-power version of the 2.0T turbocharged four-cylinder engine. 3. Different body dimensions: The length, width, and height of the BMW 318 are 4753mm, 1811mm, and 1453mm respectively; The length, width, and height of the BMW 320 are 4719mm, 1827mm, and 1459mm respectively. 4. Different wheelbase: The wheelbase of the BMW 318 is 2920mm; The wheelbase of the BMW 320 is 2851mm. 5. Different parking brake types: The brake type of the BMW 318 is manual parking brake; The brake type of the BMW 320 is electronic parking brake.

8

5

Share

Do You Need to Replace Two Tires at the Same Time?

Tire replacement depends on specific circumstances. Here are some considerations for tire replacement: 1. If the car is new and hasn't been driven much, you only need to replace the problematic tire, as the wear on tires of the same axle is usually similar; 2. If the tires have been driven tens of thousands of kilometers, replacing just one tire may cause uneven height, leading to bumpiness or steering issues at higher speeds, in which case two tires should be replaced; 3. For front-wheel-drive cars, new tires should be installed on the front wheels. Similarly, for rear-wheel-drive cars, new tires should go on the rear wheels. In front-wheel-drive cars, the front wheels serve as both steering and driving wheels, requiring strong grip during sudden braking, hence new tires should be placed on the front wheels. For rear-wheel-drive cars, since the rear wheels are prone to slipping and bear most of the power, they wear out faster, leading to reduced grip. Therefore, new tires should be installed on the rear wheels to prevent rollovers.

12

5

Share

What Transmission Does the Borui Use?

Borui is equipped with an Australian DSI 6-speed automatic transmission, and the engine is Geely's self-developed G-Power second-generation 1.8TD engine, providing smoother and more powerful power output, acceleration performance, and transmission efficiency. The Geely Borui is the first model under Geely to introduce Volvo's safety technology concepts. The Geely Borui is a mid-to-large-sized sedan, measuring 4956mm in length, 1861mm in width, 1513mm in height, with a wheelbase of 2850mm. The water ripple front grille is more square, and the lower grille design has been updated from the original ribbon style to a blade style, with the addition of a horizontal chrome trim strip, giving the front face a more layered and three-dimensional appearance. For the rear design, the Borui mainly optimized the taillights and bumper. The winged LED taillights feature a more refined internal design with more eye-catching light guide elements. The lower part of the rear bumper echoes the front face, adopting a wraparound sporty rear bumper and adding a horizontal chrome trim strip.

15

5

Share

How to Identify Turbocharger Failure?

Methods to identify turbocharger failure: 1. Oil leakage: Significant increase in oil consumption, blue or black smoke from exhaust, and reduced power; 2. Metal friction noise: Black smoke from exhaust pipe, power loss, and abnormal noise from turbocharger; 3. Bearing damage: Turbocharger bearing failure, engine power loss, high oil consumption with black smoke, and in severe cases, turbocharger ceases to function. Causes of turbocharger failure: 1. Insufficient lubricating oil pressure and flow; 2. Debris or sediment entering the lubrication system, causing oil oxidation and deterioration; 3. Metal friction noise occurs when the turbocharger rotor bearings or thrust bearings are excessively worn, causing the impeller to rub against the turbocharger housing; 4. Blocked turbocharger oil lines, leading to excessive oil accumulation at the intermediate support of the rotor assembly, which then flows along the rotor shaft into the compressor impeller; 5. Damage to the sealing ring or oil slinger near the compressor impeller, allowing oil to enter the impeller chamber and subsequently flow into the combustion chamber along with the pressurized air through the intake pipe.

9

2

Share

What Stickers Should Be Placed on the Front of a Car?

There are three types of stickers that should be placed on the front windshield of a car: the annual inspection sticker, the vehicle environmental protection sticker, and the compulsory traffic insurance sticker. Motor vehicles must undergo regular inspections. Only after passing the annual inspection can the vehicle receive the annual inspection compliance sticker. New cars do not require an annual inspection within the first six years, but they must visit the inspection center annually to obtain the annual inspection compliance sticker. The annual inspection items for motor vehicles include the braking system, lighting system, exterior appearance, and more. Motor vehicles must also undergo regular exhaust emissions testing, primarily for environmental protection purposes. After passing the exhaust emissions test, the vehicle is issued the environmental protection sticker. The compulsory traffic insurance sticker is required to be displayed after purchasing compulsory traffic insurance. Vehicles without compulsory traffic insurance are not allowed on the road. There are two types of environmental protection stickers: green and yellow, issued based on the vehicle model and emission standards after review. For new cars, the vehicle environmental protection sticker can be obtained after receiving the license plate, without the need for additional exhaust emissions testing at relevant departments. These three stickers must be affixed to the upper right corner of the front windshield as per regulations, ensuring they do not obstruct the driver's view. Failure to comply with these regulations may result in penalties if discovered by traffic police.

11

0

Share

Does the Audi A3 have navigation?

Yes, the navigation system in the Audi A3 is located within the MMI system. Here are the specific details about the Audi A3: 1. Vehicle Positioning: The Audi A3 is a compact sedan under the Audi brand, available in both sedan and hatchback versions. The Audi A3 also has high-performance models, which are the S3 and RS3. 2. Powertrain: The 1.4-liter turbocharged engine in the Audi A3 delivers 150 horsepower and a maximum torque of 250 Nm. This engine reaches its maximum power at 5000 to 6000 rpm and its maximum torque at 1750 to 3000 rpm. It features direct fuel injection technology and uses an aluminum cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission. The 2.0-liter turbocharged engine produces 190 horsepower and a maximum torque of 320 Nm, with its maximum power at 5000 rpm and maximum torque at 1600 to 4000 rpm. This engine utilizes both direct and port fuel injection technologies and employs an aluminum cylinder head with a cast iron block. It is also matched with a 7-speed dual-clutch transmission.

9

4

Share

What is the special meaning of CX30?

What are the differences between BMW 318 and BMW 320?

Do You Need to Replace Two Tires at the Same Time?

What Transmission Does the Borui Use?

How to Identify Turbocharger Failure?

What Stickers Should Be Placed on the Front of a Car?

Does the Audi A3 have navigation?

Where is the OBD interface of the Volkswagen Touran located?

What to Do If a Piece of the Tire Sidewall Falls Off?

What is the equivalent of Euro 3 emission standard in China?

Does the Civic comply with China VI emission standards?