···
Log in / Register

What is the sound when hitting the radar?

4 Answers
AugustLynn
07/28/25 1:12pm

Radar emits a continuous beep when hitting an obstacle. Here are the relevant details: 1. Reversing Radar: The reversing radar, also known as "reverse anti-collision radar" or "parking assist device", mainly consists of ultrasonic sensors, a controller, and a display. 2. Working Principle: When reversing, the reversing radar uses the ultrasonic principle. The probe installed on the rear bumper sends ultrasonic waves that reflect off obstacles, calculates the actual distance between the vehicle body and the obstacle, and then alerts the driver, making parking or reversing easier and safer.

Was this review help?
14
1
Share
DelHarper
08/11/25 5:53pm

I know a bit about radar systems. They use ultrasonic sensors on the bumper to measure distance, beeping every time you reverse. As you slowly approach an obstacle, the sound frequency changes from a relaxed 'beep—beep—beep' to a rapid 'beepbeepbeepbeep.' If you actually hit something, it suddenly turns into a continuous loud 'beeeeep—' or a wailing siren-like alert, strongly urging you to stop. Some cars also flash dashboard icons to help you see the situation behind. To prevent malfunctions, I often clean the sensors to avoid mud blockages; I also pay attention to sound changes and don’t rely solely on the beeping while ignoring my actual view.

Was this review help?
16
4
Share
Expand All
Haymitch
09/28/25 8:18am

Every day when I drive home and back into the parking space, the radar beeps softly in my ear. At first, it's an intermittent 'beep-beep', which turns into a frantic 'beepbeepbeep' as the distance closes. Once, when I was too flustered, I scraped the garage wall, and the radar immediately emitted a sharp, continuous 'wuuuu' sound, startling me into slamming on the brakes. The sound design is quite clever—using gentle tones for safe distances and harsh, sustained signals to force action during collisions. But don't rely on it too much; occasionally, dirty sensors can give false alarms, so I have to check the rearview mirror from time to time.

Was this review help?
11
1
Share
Expand All
Diane
11/12/25 3:25am

The radar warning function is a lifesaver for collision prevention. Normally, it detects obstacles and emits intermittent 'beep' sounds, with the rhythm speeding up as the distance decreases. Upon actual contact, the tone changes to a straight, prolonged 'woo—' sound as a warning of contact. This mechanism helps prevent accidents from escalating. Regular cleaning of the sensors is necessary to avoid dirt affecting sensitivity. Simple maintenance can save you a lot of trouble.

Was this review help?
14
4
Share
Expand All
More Forum Discussions

What is the penalty for overloading one person in a five-seater vehicle?

For private vehicles, overloading by one person results in a 2-point deduction and a fine. For passenger vehicles, overloading by one person leads to a 6-point deduction. Generally, exceeding 50% capacity incurs a fine and license suspension. For commercial passenger vehicles (excluding buses) and school buses, carrying passengers exceeding the approved capacity by less than 20% results in a 6-point penalty per violation.
16
3
Share

What to Do When the Car Film Gets Scratched?

If the newly applied car window film is severely scratched, you can remove the original film and apply a new one. Try applying some toothpaste on the surface of the film. Use a hairdryer to gently blow around the scratch, then smooth out the raised area to effectively cover the scratch. After the car window film is newly applied, avoid washing the car or opening/closing the windows for at least a week before performing these actions.
5
1
Share

How to Install the Buckle on a Helmet?

For a helmet with a double D-ring design, first thread the strap through both holes on the helmet. After looping the strap, insert the buckle into the front loop. Next, adjust the tightness under the chin and pull it snug. The most effective helmet positioning requires keeping the helmet level with the head, with the helmet's edge about 1 cm above the eyebrows. Finally, fasten the buckle.
13
4
Share

What is the application method for automotive epoxy primer?

Perform surface treatment before painting, including operations such as sandblasting and degreasing on steel surfaces to achieve the Swedish rust removal standard of Sa2.5 grade. When applying epoxy primer, it is necessary to add a dedicated curing agent and thinner, mix thoroughly, and let it stand for about 10 minutes. Apply the epoxy primer to achieve the specified film thickness, which can be done by spraying or brushing, and allow it to dry completely after 24 hours. For the topcoat, fluorocarbon paint or polyurethane paint is mostly selected. Apply the topcoat to achieve the specified film thickness, and allow it to dry completely after 24 hours.
4
0
Share

How to Restore the Small Screen Display on CRV?

Check if any new software has been downloaded recently. If so, it is necessary to free up some memory and uninstall the related software. If it is a hardware issue, you can only take it to a 4S shop for maintenance or to a repair shop for inspection. Check if the car's system software is not updated to the latest version, which may cause the display to freeze. If so, simply upgrade the software version. If many methods have been tried and still do not work, the only option is to perform a car inspection and replace the navigation device with a new one.
5
0
Share

Where is the BMW M4 cabin air filter located?

BMW M4 cabin air filter is located inside the glove compartment in front of the front passenger seat. To replace it, you need to remove the glove compartment, then you can see the cabin air filter inside, generally positioned at the lower left side. The function of the car cabin air filter is to filter and absorb various dust and harmful substances from the outside air, providing a better driving environment for the occupants. The BMW M4 is an imported sedan, available in coupe and convertible versions. In terms of body dimensions, the BMW M4 measures: coupe 4678mm in length, 1870mm in width, and 1394mm in height; M4 convertible 4678mm in length, 1870mm in width, and 1398mm in height.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.