What is the solution when the car is still braking after releasing the handbrake?

[LeElliana]

The solution when the car is still braking after releasing the handbrake is: 1. First warm up the car, then start it slowly; 2. Increase the throttle until you feel a jolt, and the handbrake will naturally release. The functions of the handbrake are: 1. Pulling up the handbrake when parking keeps the vehicle stationary and prevents it from rolling downhill; 2. When driving, pulling up the handbrake during a turn can create a drifting effect. The consequences of driving with the handbrake engaged are: 1. Accelerated wear of the brake disc and hardening of the brake pads due to overheating, leading to reduced braking performance; 2. Excessive wear of the handbrake's brake pads, causing damage to the drive shaft; 3. Locking of the rear wheels and snapping of the brake cable, which may result in skidding or rollover.

[RyderLynn]

A few days ago, I also encountered this situation. The handbrake was clearly released, but the car seemed stuck, and the wheels felt like they were dragging heavily. I was startled and immediately stopped to check. It might be that the handbrake cable is rusted or the spring is jammed, especially in damp winter conditions where rust is more likely. I first tried pulling and releasing the handbrake five or six times to see if it would loosen. If that didn’t work, I gently pressed the accelerator on a safe surface to rock the car—sometimes that can release the jam. But never force the car to move, as this can overheat the brake discs and damage the tires. An experienced driver friend also reminded me that regular handbrake maintenance is crucial. It’s recommended to check the cables and connections every six months and spray some anti-rust lubricant as a preventive measure. In short, if you can’t handle it yourself, take it to a professional repair shop as soon as possible to avoid costly repairs later.

[DiZoe]

My best friend had the same issue when she first started driving - the car wouldn't move even with the handbrake released, which made her panic. The main reason was actually that the handbrake cable was frozen or stuck, which often happens on rainy or cold days. She called me right from the parking lot for help, and I told her not to panic and try rocking the car back and forth in neutral or repeatedly engaging/disengaging the handbrake. If that didn't work, call a tow truck rather than risk driving. Later when we discussed it, we realized this malfunction is more common in older vehicles due to part aging. She went to the 4S shop and got a new cable installed for 300 yuan, which solved the problem. Keeping the interior clean and dry can significantly reduce such issues. Remember, safety first - never hesitate to ask for help when needed.

[DelCarmen]

Encountering the issue of the car still braking with the handbrake released, I immediately stopped to figure it out. Simply put, it might be due to a stuck spring or cable, especially after prolonged parking. I gently tried pressing the accelerator to release the tension—if it works, continue driving safely; if not, use the tools always kept in the trunk for a quick wheel check. Addressing it promptly avoids towing heavy loads, which affects fuel consumption and brake lifespan. A quick check at the repair shop will fix it.