What is the solution to the sunroof rattling issue in the Volkswagen Magotan?

1 Answers
LoganLynn
07/30/25 2:47am
The solutions for the sunroof rattling issue in the Volkswagen Magotan are: 1. Check the sunroof sliding rails and apply some lubricating oil if necessary; 2. Inspect the sunroof's fastening condition and tighten any loose screws; 3. The sunroof sealing strips, when exposed to prolonged rain or intense sunlight, are prone to aging—rubber conditioner can temporarily restore their performance; 4. Open the sunroof fully and spray rubber conditioner onto the sealing strips. Taking the 2020 Volkswagen Magotan Comfort model as an example, its body dimensions are 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm and a fuel tank capacity of 66 liters. This model is equipped with a 1.4L turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
20
3
Share
More Forum Discussions

What is the crozz car?

crozz is a Volkswagen car. Here is the relevant information: 1. Vehicle configuration: The car has a length, width, and height of 4592mm, 1852mm, and 1629mm respectively, with a wheelbase of 2765mm. The body type is a 5-door, 5-seat SUV, equipped with a single-speed electric transmission, and a top speed of 160 km/h. The car features rear-wheel drive, front MacPherson independent suspension, rear five-link independent suspension, electric power steering, a monocoque body structure, front ventilated disc brakes, rear disc brakes, and an electronic parking brake. 2. Technology configuration: The ID-Crozz is equipped with various technological features, envisioning a future scenario with advanced autonomous driving systems. The car is designed with a retractable steering wheel function to create more space for the driver. Additionally, there are no traditional physical buttons in the car; functions like media control and window operation are all managed via touchscreen. The traditional dashboard is integrated into the steering wheel and the front windshield, creating a futuristic AR-like virtual reality experience.
14
1
Share

What is the reason for the Cruze's low beam not working while the high beam is on?

Cruze if the high beam is on, but the low beam is not working, it may be that the low beam filament is burned out. You can see this by disassembling it, and just replace the bulb. However, if both low beams are not working and the filaments are not burned, you should check if the switch has power. If there is no issue, then check if the fuse is normal. Here is some additional information: 1. Bulbs are divided into headlights, middle lights, and small lights. Headlights refer to the front headlights, mainly including quartz lamps and xenon lamps; middle lights refer to brake lights, turn signals, etc.; small lights refer to interior lights, instrument panel lights, indicator lights, and width lights. 2. Rotating the lever head once turns on the small lights, and twice turns on the headlights. The lever can be pushed up and down. When in the middle position, pushing up switches between low and high beams, and releasing the lever automatically returns it to the middle position. Pushing down switches to the high beam, and you can hear a click sound when pushing down. Releasing the lever does not return it to the original position.
8
5
Share

What is the actual fuel consumption of the Highlander?

The official combined fuel consumption of the Highlander is 8.2-8.6L/100km, but the actual fuel consumption is related to driving habits, skills, road conditions, climate, etc., and a fluctuation of 10% is very normal. Here is some additional information: 1. Configuration: The TSS safety system and the 10-inch central control screen further enhance its competitiveness, while the driving experience remains Toyota's 'laid-back' style. The central control screen has been upgraded to 10.1 inches, with the physical buttons on both sides removed, providing a larger viewing area and better operation experience. 2. Interior: The interior basically maintains the layout of the old model, and the steering wheel design has not changed at all.
4
3
Share

How to Solve OBD Inspection Failure?

There are several solutions to address OBD inspection failure: 1. Clear the fault codes: If the fault codes indicate hardware issues, replace the damaged components and clear the fault codes after debugging. It is recommended to read the vehicle's fault codes before the inspection. 2. Visit a repair shop for diagnostics and fault code reset. 3. Try a different inspection lane. 4. Change the operator: Different operators may yield different results, so consider switching operators. 5. Switch inspection stations: You can request a refund and go to another inspection station. 6. Change the inspection line: Some lines may not function properly, so try switching to a different line.
13
0
Share

What Causes Vibration While Driving a Car?

Here are the specific reasons for body vibration while driving a car: 1. Wheel balancing issue: A car wheel consists of a tire and a rim. When there's a problem with wheel balancing, it means the wheel isn't in a balanced state during high-speed driving. If the balancing data is incorrect, the wheel's rotation center will deviate, causing vibration. 2. Rim problem: If the car's rims have suffered impacts during previous driving, they may become deformed. This deformation can also cause wheel vibration during driving. 3. Chassis component issues: This typically occurs in vehicles with poor post-accident repairs. The impact from an accident can affect chassis components, leading to vibration as well.
2
3
Share

Can the license plate be retained after changing cars?

After changing cars, the original license plate can be retained. Below is the relevant introduction about the conditions for retaining the original license plate: 1. Timely application: Within one year after transferring the old car to someone else or canceling it, the original license plate will be reserved for the owner. As long as an application is made to the vehicle management office to use the original license plate during this period, the original license plate can be assigned to the newly purchased car or used car. After one year, the license plate will be re-entered into the selection pool and released to the public. 2. The original license plate must have been used for more than one year: Previously, the license plate had to be used for more than three years to be retained, so many car owners who wanted to change cars waited for three years before changing to retain the license plate. Now, as long as it has been used for more than one year, an application can be made to retain it. 3. All violations and accidents related to the original car must be settled: If there were road violations or penalties while driving the original vehicle, all fines must be paid, and there should be no unresolved traffic accidents, before applying to retain the original license plate number.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.