What is the solution to the rear seat resonance in the Song DMI?

1 Answers
McDelaney
07/29/25 7:17pm
Song DMI rear seat resonance solution is to adjust the rear seats. Disadvantages of the Song DMI: The interior is generally acceptable, but the workmanship in some areas is not good, with large gaps at the joints; this car uses a dual-clutch transmission, so at low speeds, the gear shifting is not very responsive, and the jerkiness is quite noticeable—it would be better if it used a 6AT transmission; the vehicle's noise insulation is poor, mainly manifesting as wind noise and tire noise. As soon as the speed increases slightly, noise becomes noticeable inside the car. Advantages of the Song DMI: The space is relatively large, and even when fully loaded, there is no crowding; the power is very strong, and the handling is excellent.
Was this review help?
6
1
Share
More Forum Discussions

What Causes the Clicking Sound in BMW's Chassis After Parking?

There are many reasons for abnormal noises in the chassis of a BMW after parking. Below is a detailed analysis of the specific causes of these noises: 1. Cooling sound of the three-way catalytic converter: The normal operating temperature of the three-way catalytic converter is 400-800°C. After the engine is turned off, its operation gradually stops, and the temperature decreases. The metal components inside then undergo thermal expansion and contraction, resulting in abnormal noises. 2. Cooling sound of the exhaust pipe: Typically, the exhaust pipe reaches temperatures above 200°C during cold idling. Under high load or when the air-fuel mixture burns in the exhaust pipe, the temperature can be even higher. Consequently, the exhaust pipe also experiences thermal expansion and contraction, producing abnormal noises, often originating from the front end or flexible joint of the exhaust pipe. 3. Cooling sound of the turbocharger: Under normal conditions, exhaust gases can reach temperatures up to 700°C, accelerating the friction-induced heat in the rapidly spinning turbocharger. After shutdown, the thermal expansion and contraction are quite pronounced, leading to abnormal noises.
19
3
Share

Causes of Internal Failures in BMW DME Control Unit?

Multiple failures in BMW vehicles may be related to defects in the DME control unit. The product defects in BMW's DME control unit (Digital Motor Electronics) could be the direct factor leading to frequent BMW malfunctions. Common issues include warnings for the DSC body stability system, transmission failures, drivetrain faults, and tire pressure monitoring failures. The DME control unit has two major defects: 1. Poor electromagnetic compatibility, making it susceptible to electromagnetic interference: Poor electromagnetic compatibility can lead to multiple warning lights, reduced power, and other issues. Although BMW's electronic engine ignition system has independent ignition coils, the driving module is designed within the DME control unit. During engine operation, the ignition circuit transmits high currents to drive the ignition coils at high frequencies, resulting in electromagnetic interference. 2. Susceptibility to temperature effects: The direct consequences of temperature impact on the DME are engine stalling and unstable RPM. In normal data streams for new vehicles, the DME operates correctly at 81°C. However, due to the poor high-temperature resistance of internal components, the engine begins to shake when the temperature reaches 65°C after prolonged use, and it stalls immediately at 71°C.
11
1
Share

What is the normal oil pressure for a Porsche Cayenne?

Automobile oil pressure normal range varies depending on different situations: 1. When the car is running, 0.2 to 0.5 mpa; 2. When the car is idling, the oil pressure should not be lower than 0.1 mpa. If the oil pressure is too low, it will damage the engine's lubrication conditions, resulting in poor lubrication, cooling, and cleaning, which will cause adhesive wear of parts. Relevant information about tire pressure is as follows: 1. Introduction: Tire pressure, strictly speaking, refers to the pressure of the air inside the tire. In car maintenance, the engine is the heart of the car, and the damage of the engine will lead to the exhaustion of the car's life. Then, the tire pressure is the blood pressure of the car, and the level of tire pressure plays a vital role in the performance and power of the car. 2. Hazards of excessive tire pressure: The friction and adhesion of the tire will be reduced, affecting the braking effect; causing steering wheel vibration and deviation, reducing driving comfort.
11
2
Share

Are there used Wuling Hongguang MINI cars for sale?

Yes. Additional information: Introduction to the Wuling Hongguang MINI: 1. Exterior design: The Hongguang MINIEV features a two-door design, creating a cute visual effect with a vertical front and rear profile. The front face of the MINIEV adopts a narrow horizontal grille, paired with a lower through-type air intake and headlight clusters on both sides, giving it high recognizability. On the side profile, the MINIEV uses a dual-waistline design, with parallel lines complementing the front and rear raised wheel arches, making the MINIEV appear simple yet powerful. 2. Configuration: The Hongguang MINIEV comes standard with remote key + central locking, electric power steering (EPS), hill-start assist, sport/economy driving modes, power windows, fabric seats, four-way adjustable driver and front passenger seats, foldable rear bench seats, car radio, battery heating and intelligent insulation, App connectivity for smart charging and remote speed control, among others. 3. Interior: The MINIEV's interior uses a dark color scheme, with blue accents added to the air control area and seats. The dashboard features straight lines and a minimalist design.
19
3
Share

What is the tire pressure for the front and rear tires of a Porsche Cayenne?

Under normal conditions, the front tires can be around 2.2/2.4 bar, and the rear tires around 2.3/2.5 bar. The tire pressure for tires on the same axle should be the same. Generally, the recommended cold tire pressure is 2.5 bar, which helps achieve lower fuel consumption and keeps the tire pressure within the safe range of 3.0 bar during high-speed driving. In fact, tire pressure requirements vary for different vehicle models. The maximum and minimum limits for tire pressure differ, and even the same tire installed on different vehicle models may have different pressure requirements. Therefore, the optimal tire pressure is not a fixed value but depends on the specific vehicle model. The standard tire pressure for each vehicle model is indicated in the owner's manual, on the inside of the fuel filler cap, or on the B-pillar near the front passenger seat. Although manufacturers provide the optimal tire pressure, adjustments should be made based on temperature changes. In summer, when temperatures are higher, it is recommended to reduce the tire pressure by 0.1~0.2 bar. In winter, when temperatures are lower, it is advisable to increase the tire pressure by 0.1~0.2 bar.
1
1
Share

What are the reasons for the Porsche Cayenne's air conditioning not cooling?

Porsche Cayenne's air conditioning may not cool for the following reasons: 1. Refrigerant issues: The car's air conditioning system consists of multiple metal pipes with small gaps between them, leading to minor refrigerant leaks. Additionally, the desiccant bottle in the system absorbs moisture and retains some refrigerant. When the refrigerant level drops significantly, the cooling capacity of the air conditioning system diminishes. In some models with dual-zone climate control, insufficient cooling may result in hot air blowing from the vents. 2. Excessive contaminants in the compressor oil: This can clog the filter screen, reducing cooling efficiency, increasing resistance, and decreasing the flow of refrigerant to the expansion valve, leading to poor cooling. Sometimes, if air enters the air conditioning system, it can cause high pressure in the refrigerant lines, resulting in poor refrigerant circulation and insufficient cooling. 3. Problems with the receiver-drier: Its main function is to absorb moisture from the refrigerant to prevent reduced cooling efficiency due to excessive moisture. When the desiccant in the receiver-drier becomes saturated, it can no longer filter out moisture. As the refrigerant passes through the expansion valve's orifice, the drop in pressure and temperature causes the moisture to freeze, obstructing refrigerant flow, increasing resistance, or completely blocking circulation.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.