What is the solution if a car exceeds its first maintenance period?

What is a Retarder?

The automotive retarder refers to a device that, when activated during deceleration or long downhill driving, allows the vehicle to slow down smoothly, avoiding the wear and heat generated by frequent use of the brakes. Below is a detailed introduction to the retarder: 1. Based on different working principles, automotive retarders can be classified into several typical structural forms, including engine retarders, hydraulic retarders, electric turbo retarders, motor retarders, and aerodynamic retarders. 2. Depending on the form of braking torque application, automotive retarders can be divided into primary retarders (those acting on the front end of the transmission) and secondary retarders (those acting on the rear end of the transmission). 3. When a vehicle is descending a long slope, using exhaust braking can achieve good braking effects. However, for heavy-duty mining dump trucks, the effectiveness of exhaust braking is limited, and it can cause some degree of damage to the engine. Therefore, mining dump trucks equipped with hydraulic-mechanical transmissions are also fitted with hydraulic retarders.

11

2

Share

Is it necessary to clean the inside of a car engine during maintenance?

Regardless of the brand of the car or the type of engine, cleaning is essential. Here are the specific explanations: 1. The fuel system primarily involves mixing gasoline with air to form a combustible mixture. Gasoline inherently contains impurities, and air carries dust. When gasoline burns under high temperature and pressure and oxidizes with the atmosphere, carbon deposits form. If these deposits are not cleaned in time, they can cause various issues, such as: difficulty starting a cold engine, engine shaking, lack of engine power, increased fuel consumption, excessive exhaust emissions, and other adverse phenomena. 2. Due to factors like high temperature, oxidation, and oil quality, engine oil gradually loses its performance, providing less and less protection to the engine (this is the fundamental reason for regular oil changes). When the oil fails to protect the engine effectively, wear, carbon deposits, and acid corrosion can cause fatal damage to the engine. 3. If carbon deposits in the lubrication system are not cleaned promptly, they can lead to various faults, such as: clogging the engine's oil passages, causing dry friction in the engine, contaminating new oil, reducing the performance of new oil, corroding metals, decreasing the engine's sealing performance, lowering cylinder pressure, and increasing engine wear and other faults.

11

5

Share

What to Do If Your Vehicle Fails the Annual Emission Test?

To pass the annual emission test, you should focus on improving the combustion and lubrication systems. Here are specific methods: 1. Add a high-quality fuel system cleaner. It effectively removes gum, carbon deposits, and sediments from the combustion chamber, intake/exhaust valves, fuel injectors, and fuel lines while driving, keeping all parts of the fuel system clean. It also breaks down water in the fuel, improves the fuel grade, and reduces harmful emissions. It is especially recommended after using low-quality fuel. 2. Use a high-quality fuel injector cleaner and specialized equipment to clean the injectors. This removes carbon buildup, eliminates engine shaking, hesitation, poor atomization, and acceleration issues, ensuring a more precise air-fuel mixture. It restores power, saves fuel, reduces emissions, and does not harm the injectors, oxygen sensor, or catalytic converter. 3. Clean the throttle system with a high-quality throttle or intake system cleaner. Specialized cleaning equipment can remove gum and deposits from the throttle body and intake manifold, as well as carbon buildup from the intake valves, combustion chamber, and catalytic converter. This restores normal compression ratio, eliminates idle instability, knocking, misfires, and ensures a more precise air-fuel mixture. It saves fuel, reduces emissions, eliminates engine weakness and poor acceleration, enhances vehicle power and driving performance, and protects all fuel system components from rust and corrosion.

4

1

Share

What is the normal RPM range for automatic transmission startup?

For automatic transmissions, a normal startup RPM range is between 1500-2000. Below is a detailed explanation of RPM for automatic transmission vehicles: 1. Automatic transmissions operate at different RPMs under various working conditions. Proper maintenance is crucial for a good vehicle, and using the correct RPM can extend the lifespan of both the engine and transmission. 2. There are certain requirements and techniques for using automatic transmissions. When shifting gears, shift to 2nd gear when the speed reaches 20 km/h and the RPM is between 1500-2000. Shift to 3rd gear when the RPM exceeds 2000, which is close to 30 km/h. Similarly, shift to 4th gear when the speed reaches 50 km/h. 3. Shifting at 2000 RPM can easily cause carbon buildup, so the fuel-efficient RPM range is between 1500-2000 RPM. 4. For new automatic transmission vehicles during the initial break-in period, it is advisable not to exceed 2200 RPM. During the mid break-in period, do not exceed 3000 RPM, and it is also recommended not to exceed 3000 RPM during the later break-in period.

16

1

Share

Is the highway toll-free during the Mid-Autumn Festival?

During the Mid-Autumn Festival holiday, highways charge tolls as usual and are not toll-free. The specific policies for toll-free highway access are as follows: 1. According to the "Implementation Plan for Exempting Small Passenger Vehicles from Toll Fees on Major Holidays," the toll-free period applies to four national statutory holidays: Spring Festival, Qingming Festival, Labor Day, and National Day, as well as the consecutive holidays determined by the State Council for these statutory holidays in the current year. 2. The toll-free period starts at 00:00 on the first day of the holiday and ends at 24:00 on the last day of the holiday (for ordinary roads, the time is based on when the vehicle passes the toll booth lane, while for highways, it is based on when the vehicle exits the toll lane at the exit).

15

2

Share

What Are the Reasons for Difficult Cold Starts?

There are five main causes for difficult cold starts: 1. Fuel pressure regulator failure: The fuel pressure in the fuel system directly affects the mixture concentration. If the vehicle is difficult to start, the fuel pressure should be checked first, and the fault location can be determined by inspecting the fuel pressure regulator. 2. Fuel pump and fuel filter failure: When the vehicle is difficult to start, the fuel pump usually operates normally, but the issue may arise from a clogged fuel pump filter screen preventing sufficient fuel intake or a blocked fuel filter causing insufficient fuel system pressure. 3. Cold start system failure: Some vehicles are equipped with a cold start injector to enrich the mixture during cold starts. A faulty cold start system may result in the cold start injector being clogged by deposits, affecting fuel atomization quality and causing difficult cold starts. Drivers should pay attention to this. 4. Fuel injector failure: A faulty fuel injector may be caused by clogged injector nozzles due to deposits, leading to either too lean or too rich a mixture. Checking the injector can determine if it is the cause of the cold start difficulty. 5. Coolant temperature sensor failure: The coolant temperature sensor detects the temperature of the coolant and converts it into a voltage signal related to temperature. If the sensor malfunctions during use, it can cause significant deviations in the output signal, affecting normal starting.

8

5

Share

What is the solution if a car exceeds its first maintenance period?

What is a Retarder?

Is it necessary to clean the inside of a car engine during maintenance?

What to Do If Your Vehicle Fails the Annual Emission Test?

What is the normal RPM range for automatic transmission startup?

Is the highway toll-free during the Mid-Autumn Festival?

What Are the Reasons for Difficult Cold Starts?

How to Use Turn Signals When Entering a Roundabout

What Causes Rapid Consumption of Antifreeze?

How to Set Automatic Mirror Tilt When Reversing?

What to Pay Attention to When Changing Engine Oil and Oil Filter