What is the solution for water leakage in the Verano trunk?

1 Answers
VonIsaac
07/30/25 1:56am
Verano trunk water leakage causes and solutions are as follows: 1. Cause: Sunroof drain pipe detachment. Solution: Replace the sunroof drain pipe. 2. Cause: Improper sealing strip closure. Solution: Replace with new sealing strips. 3. Cause: Trunk damage or deformation. Solution: Repair at a 4S shop. Below is more information about car trunk water leakage: 1. Waterproofing in various parts of a car is ensured by sealing strips made of rubber material. Rubber inherently possesses certain strength and hardness, generally preventing deformation during use. However, car sealing strips are consumables that age due to prolonged exposure to external air and high usage frequency, leading to wear. Once damaged, these strips cause water leakage. 2. Water in the trunk can easily lead to rusting and, in severe cases, perforation. The spare tire compartment is positioned low in the trunk, making it prone to water accumulation. If not drained promptly, this can cause mildew in the car's interior.
Was this review help?
17
5
Share
More Forum Discussions

Is U-Turn Allowed at a Red Light?

Generally, U-turns are not allowed at red lights. Here are the details: Traffic Regulations: According to Article 49 of the 'Implementation Regulations of the Road Traffic Safety Law,' motor vehicles are prohibited from making U-turns at locations with no U-turn or no left-turn signs or markings, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or sections prone to danger. Motor vehicles can make U-turns at locations without no U-turn or no left-turn signs or markings, but they must not obstruct the passage of other normally moving vehicles or pedestrians. Conditions for Allowing U-turns: At intersections where left turns are permitted, if there is a sign indicating 'U-turn allowed during red or green light,' motor vehicles should follow the sign's instructions to make a U-turn during the red or green light. If there is no such sign, U-turns can be made during either the red or green light, but the U-turn must not obstruct the passage of other normally moving vehicles or pedestrians. In the absence of a no U-turn sign, if the intersection allows left turns, then U-turns are permitted; if left turns are prohibited, then U-turns are not allowed.
10
1
Share

Should I shift to P or N gear when stopping at a traffic light?

Shift to N gear. Here are the details: If the waiting time is less than 30 seconds, stay in D gear and press the brake. Since the duration is relatively short, shifting back and forth is more troublesome and doesn't save much fuel. Frequent gear shifting operations can increase wear on the clutch and transmission. If the waiting time is between 30 seconds and one minute, shift to N gear and engage the handbrake. This allows you to release your right foot for a rest, disconnects the power transmission, reduces engine load, decreases fuel consumption, and is equally safe. It is not recommended to shift to P gear when waiting at a red light because when the vehicle is stopped in P gear, a hook in the transmission locks onto the gear, creating mutual force between them. Over time, this can accelerate transmission wear.
2
5
Share

What are the symptoms of a clogged carburetor?

If the idle circuit is clogged, there will be no idle speed, and the engine will stall when you take your hand off the throttle. If the acceleration circuit is clogged, the vehicle will lack power, struggle to accelerate, and be reluctant to move even when the throttle is opened. Here are some maintenance tips for carburetors: Regular cleaning: Periodically clean the carburetor to keep its fuel and air passages clean and ensure the small orifices are unobstructed. This is crucial for extending the carburetor's service life. Filtering impurities: Air enters the carburetor through the air filter. Since the filter cannot be too dense, some tiny impurities in the air may still pass through and enter the carburetor. If the air filter is of poor quality, it can cause more severe issues.
14
1
Share

What are the characteristics of Yokohama tires?

Yokohama tires are characterized by their wear resistance and high road noise. Below is the relevant introduction: Yokohama Tires: Formerly known as Yokohama Tires, Yokohama Rubber Co., Ltd. officially changed its name in China to Yokohama in 2008. Advantages of the tires: Yokohama tires feature low fuel consumption performance, superior quietness, and comfort, which can reduce driver fatigue, making them an environmentally friendly and fuel-efficient tire that is more considerate to both the environment and humans. Utilizing nano multiple hybrid technology, they achieve the "golden ratio" of low fuel consumption, wet performance, and wear resistance. By adopting Yokohama's self-developed "low fuel consumption structure technology," they achieve excellent fuel efficiency.
20
0
Share

Which car brand does Huawei cooperate with?

Huawei cooperates with the Seres car brand. The following is relevant information about Seres: Introduction: Seres, fully named "Jinkang Seres," is a mid-to-high-end new energy vehicle brand under "Jinkang New Energy," a wholly-owned subsidiary of Sokon Group. As a new energy vehicle manufacturer with a background in traditional automobile manufacturing, Jinkang Seres was established in Silicon Valley, USA, in 2016. After continuous development, the brand now possesses mature vehicle manufacturing technology. Range: The Seres Huawei Smart Selection SF5 adopts the HUAWEI-DriveONE three-in-one electric drive system, with a pure electric NEDC range of 180 kilometers under full charge. With the support of the Hump Intelligent Range Extender System, this range-extended electric vehicle can achieve a comprehensive range of over 1,000 kilometers.
12
5
Share

Should You Press Both the Clutch and Brake When Stopping at a Traffic Light?

Yes, here are the details: When encountering a traffic light, you need to press both the clutch and brake simultaneously. This is because during deceleration, the gear may not match the engine speed, leading to a dragging gear situation. Only by pressing the clutch can you disconnect the power link between the transmission and the engine, allowing you to slow down without affecting the engine. Pressing the clutch only cuts off the power, equivalent to coasting in neutral. Additionally, vacuum assist will significantly decrease, resulting in a longer braking distance. Therefore, it is recommended to first press the brake to slow down, then press the clutch just before coming to a complete stop, and shift to neutral or Park (P) as needed. Apply the handbrake if necessary. The clutch is primarily used during gear shifting, speed control, and semi-clutch operations. When not using the clutch, avoid resting your foot on the clutch pedal.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.