What is the solution for transmission overheating in the 2012 Focus?

1 Answers
VanCourtney
07/29/25 1:54pm
The solution for transmission overheating in the 2012 Focus is: add transmission fluid; add engine coolant; clean the radiator. The 2012 Focus features a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.8L naturally aspirated engine, delivering a maximum horsepower of 124ps, a maximum power of 91kW, and a maximum torque of 161Nm, paired with a 5-speed manual transmission. The Focus transmission model is 4F27E. The functions of the transmission are: Changing the gear ratio to meet the traction needs under different driving conditions; Enabling reverse driving; Interrupting power transmission to the drive wheels when the engine starts, idles, shifts gears, or requires parking for power output.
Was this review help?
13
5
Share
More Forum Discussions

Is the Haoying produced by GAC Honda or Dongfeng Honda?

Haoying is produced by GAC Honda. Below is the relevant introduction about GAC Honda: 1. The length, width, and height of the Honda Haoying are 4634mm, 1855mm, and 1679mm respectively, with a wheelbase of 2661mm. The exterior design of the Honda Haoying has been optimized, featuring a U-shaped front grille with a blackened mesh interior and decorated with thick chrome trim. 2. The headlights on both sides are integrated with the grille, giving a full and robust appearance. The arrangement inside the headlight assembly is quite distinctive, adopting an eagle feather design that exudes a strong sense of fashion. The lower air intake is quite wide. The application of various lines on the front face creates a strong three-dimensional effect. 3. The front and rear suspensions of the Honda Haoying are MacPherson independent suspension and multi-link independent suspension respectively, using a front-wheel-drive mode. The Honda Haoying employs a hybrid power mode, equipped with the third-generation i-MMD dual-motor hybrid system, supporting three driving modes: pure electric mode, hybrid mode, and fuel mode.
13
1
Share

Does Prolonged Idling While Parking Affect the Engine?

Prolonged idling while parking does affect the engine. Idling is not a speed but rather an operational state where the engine runs without load. Parking idling refers to the situation where the car is stationary but the engine remains running at a certain speed. The impacts of prolonged parking idling on the engine are as follows: 1. During extended idling, the throttle opening is minimal, and the fuel injector sprays a highly concentrated mixture to maintain engine operation. Consequently, idling is more prone to causing carbon buildup compared to driving or highway speeds. 2. When the engine idles, the lower temperature and pressure inside the cylinders prolong the ignition preparation time. Combined with reduced cylinder sealing, this can lead to engine knocking, shortening the engine's lifespan. 3. Prolonged idling results in an overly rich air-fuel mixture, reducing oxygen levels in the exhaust. Unburned mixture may ignite at the catalytic converter, potentially damaging it.
14
0
Share

What Causes a Strong Gasoline Smell?

The reasons for a strong gasoline smell are as follows: 1. Overfilling the gas tank. When the tank is full, gasoline may flow into the charcoal canister through the fuel line. The charcoal canister is designed to absorb gasoline vapors, but if it becomes saturated with liquid gasoline, it may excessively release gasoline vapors through the ventilation holes, especially when the air conditioning is in external circulation mode, making the gasoline smell particularly strong. 2. Aging of the charcoal canister rubber hose. The rubber hose connecting the charcoal canister to the throttle body will gradually deteriorate with increased mileage. Aging can cause gasoline vapor leaks, resulting in a persistent gasoline smell inside the car.
19
2
Share

What brand is Cooper tires?

Cooper tires belong to the Cooper Tire brand. Here is some information about Cooper tires: 1. Cooper tires are mostly used on off-road vehicles, making them relatively more suitable for long-distance travel and off-roading. 2. Long-distance travel and off-roading cause severe wear and tear on tires. Cooper tires outperform most tires in terms of wear resistance, which is a significant advantage for owners who frequently drive long distances or off-road. Additional information: 1. Cooper tires also offer good traction performance and cornering stability. 2. The downside is: the good wear resistance of the tires means they are harder, resulting in louder tire noise, which significantly impacts driving comfort.
5
2
Share

How to Operate High and Low Beams?

The operation method of high and low beams mainly includes: 1. There is a set of light combination switches on the left side of the steering wheel. 2. At night, rotating the combination switch forward one notch turns on the dashboard lights. 3. Rotating another notch switches to low beams, and one more notch forward activates the high beams. Additional Information: 1. Car high and low beams are used for nighttime driving illumination. 2. When meeting another vehicle at night, switch to low beams at least 150 meters away from the oncoming vehicle. Use low beams when meeting non-motor vehicles on narrow roads or bridges. 3. If road conditions are being explored or there is an oncoming vehicle in the opposite lane, switch back to low beams at least 150 meters in advance.
19
5
Share

How to Lift the Wiper of a Volkswagen Car?

To lift the wiper of a Volkswagen car, simply pull the wiper arm upwards. Below is an introduction about the wiper: 1. The wiper has a metal wiper arm, which holds the wiper blade. Inside the metal wiper arm, there is a spring. When replacing the wiper blade, you only need to pull the wiper arm upwards to lift it, and then you can replace the wiper blade. 2. Most cars have wiper blades with a U-shaped interface, which is very convenient for removal. During the replacement process, it is important to note that after lifting the metal wiper arm and removing the wiper blade, you must hold the metal wiper arm to prevent it from snapping back and breaking the windshield. 3. The head of the metal wiper arm is made of metal. When selecting a wiper blade, be sure to choose one that fits the size of your car's windshield and has the correct interface. The wiper blade is a wear-and-tear part, and there is no exact replacement time for it. It should be replaced when it fails to clean the windshield properly or makes unusual noises during operation.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.