What is the solution for the sunroof rattle in the Envision?

1 Answers
DeDallas
07/29/25 7:41pm
The solutions for the sunroof rattle in the Envision are as follows: 1. Open the sunroof fully and spray sealant maintenance agent on the rubber seals. 2. Tighten the sunroof screws. 3. Remove dust with a towel. 4. Apply lubricant to the sunroof tracks. Additional Information: Components of a car sunroof include: 1. Sliding mechanism; 2. Drive mechanism; 3. Control switch; 4. Control system. Maintenance methods for car sunroofs: 1. Regularly check the condition of the sunroof tracks; 2. Reduce the frequency of sunroof usage; 3. Do not open the sunroof when the car is cold in winter; 4. Check the drainage condition of the sunroof before the rainy season.
Was this review help?
14
4
Share
More Forum Discussions

Which Volvo Technologies Are Used in the Lynk & Co 06?

The Lynk & Co 06 is equipped with a 1.5T three-cylinder engine that incorporates Volvo technology. Its overall performance is not inferior to some 1.8T engines, delivering a maximum power of 130kW (177PS) and a maximum torque of 265N·m. The transmission is a 7DCT gearbox. Here are other details about the Lynk & Co 06: 1. Exterior Design: Unlike conventional floating roof designs, it features sharp angular lines, giving it a more dynamic and powerful appearance. The Lynk & Co 06 also offers a two-tone body color option. 2. Interior Design: The cabin combines light and dark-colored panels and adopts a dual-screen layout for the instrument cluster and infotainment system. 3. Features: It comes with a parking camera, ACC adaptive cruise control, a panoramic sunroof, and more.
7
4
Share

What is the SET button in a car?

The SET button in a car is a speed adjustment switch, which serves as the speed regulation indicator for cruise control. When setting the cruise control, the vehicle needs to be accelerated to the desired speed, and then the SET button is pressed to adjust. To use cruise control, first press the ON button to activate the cruise control function. When setting the cruise control speed, press the SET button to configure it. Cruise control has speed limitations, typically requiring the vehicle to be traveling at least 48 km/h. If the brake pedal is pressed during driving, the cruise control will deactivate. To resume cruise control, press the RSM button in the car. To increase the cruise control speed, press the ACCEL button. To decrease the cruise control speed, press the CST button. The cruise control function in a car works by using a speed sensor to transmit signals and compare them with the set speed, ensuring the vehicle maintains the preset speed. The car's computer can then provide the most accurate fuel supply. Using cruise control allows for more complete fuel combustion in the engine, while also reducing fuel consumption.
16
2
Share

Solutions for Corolla Remote Key Failure?

Hold down the unlock button on the remote key, insert the key into the ignition hole, quickly turn the key to the car self-check position, immediately turn the key back to the lock position, and quickly repeat this process three times. Here is the relevant introduction to the Toyota Corolla: 1. Comprehensive safety features. The Toyota Corolla U.S. version comes standard with front and side airbags, and is equipped with the Toyota Safety Sense driver assistance suite, including standard features like lane departure alert, rearview camera, pre-collision system with pedestrian detection, automatic high beams, and dynamic radar cruise control. 2. Stable quality with low maintenance costs. Although the Toyota Corolla is not a luxury car, it has very stable quality and very affordable after-sales maintenance. 3. Spacious rear seat space. The Toyota Corolla focuses on space, with not only the domestic version offering large interior space, but the overseas version also providing ample room, with rear seat space up to 40 inches.
7
2
Share

What does the pressure gauge pointer indicate for normal pressure in a fire extinguisher

The pressure gauge pointer of a fire extinguisher indicates normal pressure when it is in the green zone. The normal pressure value of a fire extinguisher is approximately between 1.2—1.5 MPa. If the pointer is in the red zone, it means the pressure inside the cylinder is insufficient, indicating the fire extinguisher cannot be used normally. If the pointer is in the yellow zone, it indicates overpressure, meaning the pressure is too high and poses a potential danger (however, slight overpressure may still be considered normal). Relevant information about fire extinguishers is as follows: 1. Introduction: A fire extinguisher, also known as a fire cylinder, is a portable firefighting tool. It contains chemicals used to extinguish fires. The fire extinguisher is a sturdy metal cylinder filled with water or fire-extinguishing materials. 2. Working Principle: When the lever at the top of the cylinder is pressed, the high pressure generated forces the extinguishing agent inside the cylinder out, similar to how a spray can ejects its contents. The function of a fire extinguisher is to displace air, depriving the fire of oxygen and thus extinguishing it.
2
1
Share

What is the difference between a DSG transmission and an AT transmission?

The differences between a DSG transmission and an AT transmission are as follows: 1. AT: The torque converter is the most distinctive component of an AT transmission, consisting of components such as the pump wheel, turbine, and guide wheel, which directly input engine power to transmit torque and perform clutch functions. The pump wheel and turbine form a working pair, similar to two fans placed opposite each other, where the wind generated by one active fan drives the blades of the other passive fan to rotate, with the flowing air—wind—serving as the medium for kinetic energy transmission. 2. DSG: The DSG transmission is distinctly different from traditional automatic transmissions, as the DSG does not use a hydraulic torque converter from the outset. This transmission was not developed based on the conventional concept of an automatic transmission. The engineers who designed the DSG took an innovative and entirely new technological path, cleverly combining the flexibility of a manual transmission with the convenience of a traditional automatic transmission.
11
1
Share

What is the phenomenon of drivers using their eyes, ears, hands, and feet simultaneously while driving?

Drivers using their eyes, ears, hands, and feet simultaneously while driving is known as attention allocation. Here is relevant information: 1. Driving precautions: Suburban roads: There are many intersections, so be cautious of motorcycles and bicycles suddenly appearing from side roads. Avoid driving too close to the right boundary of the road and maintain sufficient safety distance. When pedestrians (especially the elderly or children) are present, remain highly alert, keep a safe distance, and control your speed. 2. "Three precautions": Pay attention to food hygiene: Due to the mobile nature of driving jobs, always choose clean and hygienic restaurants when dining to prevent infectious diseases. Pay attention to rest: Ensure adequate sleep to stay energetic and focused, enabling safe driving. Maintain a safe following distance: While driving, keep sufficient longitudinal and lateral safety distances, always be aware of the movements of vehicles and pedestrians, and avoid following the vehicle ahead too closely or driving side by side to prevent rear-end collisions and side-swipe accidents.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.