What is the solution for the sunroof abnormal noise in the Edge?

Which Fuse to Pull to Stop the Odometer from Running?

Pull out the ABS fuse, and the vehicle will not display mileage. ABS is the anti-lock braking system installed in vehicles, designed to reasonably distribute braking torque, prevent wheel lock-up during emergency braking in dangerous situations, and allow the vehicle to maintain basic directional control. Once a wheel locks up, the vehicle is prone to skidding or fishtailing, which can lead to more serious traffic accidents. Removing the ABS poses significant risks, as detailed below: 1. After removing the ABS: The speed cannot be displayed, and systems such as the vehicle stability system, cruise control, automatic locking, and instantaneous fuel consumption, which rely on speed as a reference, will not function properly; 2. With the ABS removed: During emergency braking, the vehicle is highly likely to skid or fishtail, and the braking system may also malfunction. On highways or snowy roads, the brakes may fail to stop the vehicle, increasing the risk of accidents.

3

2

Share

Location of the BYD Han Front Hood Switch?

The front hood switch of the BYD Han is located on the dashboard in front of the driver's left leg. Pull it twice consecutively to open the front hood, similar to most vehicle models. Evaluation of the BYD Han Front Hood: The BYD Han front hood gives a sense of sturdiness. As a feature of passive safety, being too light could pose a risk of lifting during high-speed operation. The materials used are quite solid, and in case of emergencies, it can extend the crumple distance, offering high safety performance. Evaluation of BYD Usage: BYD is very suitable for small to medium-sized families and aligns well with the current concept of energy conservation. It helps reduce carbon dioxide emissions, creating favorable conditions for environmental protection.

17

0

Share

What is the part that fixes the shock absorber called?

The part that fixes the shock absorber is called the suspension control arm. What is a shock absorber: Shock absorbers are vulnerable components during vehicle use. The performance of shock absorbers directly affects the driving smoothness of the car and the lifespan of other mechanical parts. Therefore, shock absorbers should always be maintained in good working condition. Fault inspection: Drive the vehicle on rough road conditions for 10km and then stop. Touch the shock absorber housing with your hand. If it's not hot enough, it indicates there's no internal resistance in the shock absorber, meaning it's not working. At this point, you can add appropriate lubricating oil and test again. If the housing becomes hot, it means there's insufficient oil inside the shock absorber and it should be refilled; otherwise, it indicates the shock absorber has failed.

11

5

Share

At What Speed Should You Depress the Clutch When Decelerating in a Manual Transmission?

In a manual transmission vehicle, you should depress the clutch when decelerating to speeds below 20 km/h in third gear, below 25 km/h in fourth gear, and below 35 km/h in fifth gear. When not to depress the clutch: During normal driving when deceleration is required, if lifting off the accelerator does not achieve the desired speed reduction, you should use the brake to adjust speed. In this situation, generally, you do not need to depress the clutch. However, as per standard practice, the left foot should rest on the clutch pedal, ready to depress it if needed. When to depress the clutch: During driving, frequent operation of the clutch can cause relative slipping between the driving and driven parts of the clutch, generating frictional heat. If this heat is not dissipated promptly, it can significantly affect the reliability and service life of the clutch.

5

Share

How many meters does it take to stop when braking suddenly at 70 mph?

Taking the Passat as an example, the braking distance for a sudden stop at 70 mph is 32.5 meters. The braking distance at 30 km/h is 6.2 meters; at 40 km/h, it's 10 meters; at 50 km/h, it's 14.2 meters; at 60 km/h, it's 22.85 meters; and at 70 and 80 km/h, the braking distances are 32.5 meters and 44 meters, respectively. Here are some additional hazards of frequent sudden braking: 1. Increased fuel consumption. 2. Affects tire lifespan and increases wear. 3. Reduces engine lifespan. 4. Decreases the lifespan of the clutch system. 5. Shortens the lifespan of brake pads and brake discs.

2

3

Share

What are the pros and cons of rain guards?

Prevents rainwater from entering the vehicle, avoids rain being blown inside, ensures airflow does not affect driving or passengers, provides shade, reduces glare that could impair driving visibility, improves interior temperature, and helps eliminate odors. However, the shape of rain guards may not perfectly match the contour of the window edges, potentially leading to minor warping or gaps in certain areas. These imperfections can become sources of wind noise and inadequate adhesive strength. Installation method for rain guards: Peel off the 3M adhesive on the rain guard and gently attach it along the upper edge of the window. Once the positioning is confirmed to be accurate, press firmly along the edges to ensure the rain guard adheres securely to the vehicle. Material of rain guards: A protruding rain visor made of synthetic resin or engineering plastic.

10

3

Share

What is the solution for the sunroof abnormal noise in the Edge?

Which Fuse to Pull to Stop the Odometer from Running?

Location of the BYD Han Front Hood Switch?

What is the part that fixes the shock absorber called?

At What Speed Should You Depress the Clutch When Decelerating in a Manual Transmission?

How many meters does it take to stop when braking suddenly at 70 mph?

What are the pros and cons of rain guards?

What does the ISOFIX interface in a car look like?

Can I Drive Someone Else's Car on the Road?

How many kilometers should a Nissan go before changing brake fluid?

Why are tires prone to blowouts on highways?