What is the solution for the JAC EPC light coming on?

How to Open the Hood of a Lexus UX?

To open the hood of a Lexus UX, simply lift it upward to a certain height by hand. Below are additional details: 1. The hood release lever of the Lexus UX is located on the lower panel on the driver's side. There is a pull handle; gently pull it, and the hood will make a clicking sound. 2. The hood is made of rubber foam and aluminum foil materials, which help reduce engine noise, isolate heat generated during engine operation, protect the paint surface on the hood, and prevent aging. 3. Beneath the hood lie crucial components of the vehicle, including the engine, electrical circuits, fuel system, braking system, and transmission system, all of which are vital to the vehicle. By enhancing the strength and construction of the hood, it effectively guards against adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle operates properly.

1

0

Share

Will adding windshield washer fluid to the antifreeze affect the car?

If a small amount of windshield washer fluid is added to the antifreeze, the impact is not significant. However, adding a large amount can cause malfunctions. This is because windshield washer fluid lowers the boiling point of the antifreeze, preventing the engine from cooling effectively. Precautions for mixing antifreeze: Always use the same brand of antifreeze. Different brands of antifreeze may have varying production formulas, and mixing them could lead to chemical reactions between additives, rendering them ineffective. The key indicators of antifreeze are its freezing and boiling points. Market-available antifreeze comes in freezing points such as -15°C, -25°C, -30°C, and -40°C. It is generally advisable to choose an antifreeze with a freezing point at least 10°C lower than the lowest temperature in your region. Functions of antifreeze: Antifreeze is a coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion year-round. The main components of antifreeze are: 50% purified water, 40% methanol, and 10% other substances.

20

4

Share

Should You Press the Clutch or Brake First When Braking?

It depends on the specific situation. Clutch before brake: If you need to stop at a red light or pull over to the side, you should press the clutch first. Then, as you approach the crosswalk, press the brake directly. This is because at lower speeds, the friction resistance between the tires and the ground increases. Pressing the brake first can cause the engine to stall. Brake before clutch: For manual transmission cars, when downshifting to reduce speed—for example, shifting from fourth gear to third, or from third gear to second before turning, making a U-turn, or stopping—you should press the brake first to slow down. Once the speed has dropped to the appropriate range, press the clutch to shift gears.

6

4

Share

Can part-time 4WD 4h turn?

Part-time 4WD 4h can turn, but it cannot turn on paved roads. Only on unpaved roads can the 4h mode turn. Below is relevant information: Specific reason: The main reason is that the turning radius of the front and rear wheels is different, so when the vehicle needs to turn, there needs to be a speed difference between the front and rear wheels. However, the power distribution of the front and rear axles in part-time 4WD is fixed, meaning there is no speed difference between the front and rear wheels. Therefore, on paved roads with good grip, one of the wheels cannot overcome the friction. Turning with part-time 4WD 4h on paved roads can easily cause rollover. Part-time 4WD: The structure of part-time 4WD is much simpler than full-time 4WD. Part-time 4WD has been implemented in the Jeep Willys, and it does not require strong electronic controls. The transfer case structure of part-time 4WD can be for semi-axles or solid axles.

15

0

Share

What Gear Should an Automatic Car Use When Going Uphill?

For automatic transmission cars, generally shifting to D (Drive) gear is sufficient when going uphill. Some vehicles are equipped with D-1 or D-2 gears specifically designed for steep inclines, which can be utilized in such situations. For cars with manual-automatic transmission, you can switch to manual mode and use first gear. Fuel-saving techniques for automatic cars when climbing hills: 1. When shifting from a higher gear to a lower one while climbing with a heavy load, do not wait until the car's momentum is completely lost before downshifting. Instead, shift earlier to avoid difficulty in engaging the lower gear. Otherwise, even if you manage to shift down, the speed may not be optimal for fuel efficiency in that gear, potentially leading to a stall on the slope and requiring a restart, which increases fuel consumption. 2. Avoid climbing hills at high speeds in low gears. 3. Do not press the accelerator excessively to force the car up the hill. This consumes more fuel compared to climbing at the optimal speed for a lower gear. 4. Do not accelerate just before reaching the slope. Instead, assess the slope's gradient and length beforehand, accelerate in advance, and make full use of the car's momentum to climb efficiently. The principle is "do not strain in high gears or rush in low gears" to save fuel.

11

3

Share

What are the causes of high-low range shift valve failure?

This type of failure generally occurs in the auxiliary box's high-low range shifting control system. When this failure occurs, the driver should first pull the vehicle over to the side. The specific inspection method is to first check whether the vehicle's air pressure meets requirements, then place the gear shift lever in neutral position while stationary. Structure and working principle of auxiliary box: It consists of a power take-off shaft, low-speed gear, synchronizer, left and right intermediate shafts, high-low speed control cylinder, etc. Each of the left and right intermediate shafts has two gears that mesh with the main gearbox's power take-off shaft gear and auxiliary box's low-speed gear respectively. Precautions: During vehicle operation, sudden occurrences of having only high range without low range, or only low range without high range are common failures. This type of failure generally occurs in the auxiliary box's high-low range shifting control system.

14

5

Share

What is the solution for the JAC EPC light coming on?

How to Open the Hood of a Lexus UX?

Will adding windshield washer fluid to the antifreeze affect the car?

Should You Press the Clutch or Brake First When Braking?

Can part-time 4WD 4h turn?

What Gear Should an Automatic Car Use When Going Uphill?

What are the causes of high-low range shift valve failure?

Can You Shift to Neutral While Driving an Automatic Transmission Car?

What is the displacement of the Beijing Hyundai Fista?

How to Open the Audi Fuel Tank Cap?

What Causes the Sound of Water Sloshing When Braking?