···
Log in / Register

What is the solution for the Honda CR-V's engine oil dilution issue?

6Answers
DelElizabeth
07/29/2025, 02:14:48 PM

Honda CR-V's engine oil dilution issue can be resolved as follows: Dongfeng Honda has recalled 130,455 units of the 2018 CR-V models equipped with the 1.5T engine, produced between February 14, 2017, and February 27, 2018. For the recalled vehicles, the company will provide free replacement of the air conditioning control unit, upgrade the FI-ECU software, replace the engine oil and oil filter, and add engine cleaner. Additionally, for models equipped with CVT transmissions, the lower radiator hose assembly will be replaced, and the TCU software will be upgraded to suppress the increase in engine oil level and eliminate potential safety hazards.

Was this review help?
103
Share
LeWalter
08/14/2025, 06:44:50 AM

When dealing with the Honda CR-V oil dilution issue, I found that checking the official recall notice is crucial first. Honda has released a free ECU software update for this problem, which optimizes engine control and reduces gasoline leakage into the engine oil. As someone who frequently works with these vehicles, I recommend promptly visiting a Honda 4S dealership or authorized service center to install the update. Most owners report significant improvements. After installation, the oil level should return to normal. If the issue isn't fully resolved, they may inspect or replace related components, such as the oil level sensor. For prevention, avoid frequent short-distance driving or cold starts, and allow the engine to warm up sufficiently to reduce the risk of fuel dilution. Don't forget to regularly check the oil level with the dipstick—once a month is sufficient—as this helps detect problems early. In the long run, following the maintenance schedule can keep the engine healthy and save on repair costs.

Was this review help?
10
Share
Expand All
LeMiguel
10/14/2025, 12:58:32 AM

As a Honda CR-V owner, I have firsthand experience in resolving the engine oil dilution issue. Last year, my vehicle encountered this problem, and I immediately contacted my local Honda dealership. They provided a free ECU upgrade service. After the update, the oil level no longer rises abnormally, and the performance has stabilized. The key takeaways I learned include: avoid only taking short trips when the engine is cold, drive longer distances to allow the engine to fully warm up; regularly check the dipstick to ensure the oil level is within the normal range; and if you smell gasoline or notice a loss of power, seek repairs early. Honda has a dedicated service hotline for checking recall status. Now I can drive with much more peace of mind, and I'm sharing this with fellow owners to help them avoid unnecessary repair expenses—simple maintenance is often sufficient.

Was this review help?
5
Share
Expand All
Taylor
11/27/2025, 12:53:45 AM

While commuting in my Honda CR-V, I noticed an increase in engine oil, which affected daily use and safety. The solution was to directly visit a Honda 4S dealership to apply for an ECU software update, which they handled for free, fixing the engine settings to prevent gasoline from mixing with the oil. After the operation, I monitored the oil level and it returned to normal. I also learned to avoid short-distance driving, especially in winter, by warming up the engine for a few minutes. During regular maintenance, I make sure to check to prevent small issues from becoming bigger problems.

Was this review help?
14
Share
Expand All
DelCarmen
01/17/2026, 02:21:47 AM

I was quite worried when my family CR-V experienced increased engine oil levels, especially since I often drive with my family. The best solution is to contact a Honda service center to schedule an ECU update, which is free in most regions and adjusts the engine to reduce the issue. After the update, the oil levels stabilized—safety comes first. It's also recommended to develop a habit: check the oil dipstick monthly and ensure the engine is warmed up before long trips. Addressing the issue promptly helps maintain reliability, ensuring worry-free family outings.

Was this review help?
4
Share
Expand All
BethanyMarie
04/13/2026, 04:13:33 AM

Being cost-conscious about car maintenance, my first choice for addressing the CR-V's oil dilution issue is Honda's ECU update—it's free and tackles the root cause. Post-update, engine efficiency improves, reducing oil waste and saving on repair costs. Preventatively, avoid short trips with a cold engine; warming it up or sticking to regular maintenance helps. Checking oil levels is a daily habit, and if the issue recurs, visiting the dealership might offer additional warranty support. Maintaining these practices long-term keeps expenses down.

Was this review help?
20
Share
Expand All
More Q&A

Where is the cabin air filter located on the Great Wall Haval H6?

Haval H6's cabin air filter is located on the passenger side, beneath the glove compartment near the center console area. Here is relevant information about the cabin air filter and Haval H6: 1. Cabin Air Filter Overview: The cabin air filter is a component installed in the vehicle's air conditioning system that captures dust particles, alleviates respiratory discomfort, reduces irritation for allergy sufferers, and protects the AC cooling system. 2. Haval H6 Overview: The Haval H6 is positioned as an urban intelligent SUV with dimensions of 4640mm (length) × 1825mm (width) × 1690mm (height) and a wheelbase of 2680mm. Power options include two turbocharged engines: a 1.5-liter unit and a 2.0-liter unit, paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission.
105
Share

Is it necessary to arrive on time for Subject 4?

You can arrive a bit late, but it is recommended to be on time. Additional information: Exam basics: The Subject 4 exam lasts 45 minutes, consists of 50 questions, with a full score of 100 and a passing score of 90. It includes true/false questions, single-choice questions, and multiple-choice questions. The main content assessed includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of post-accident procedures. After passing Subject 4, candidates must undergo at least 30 minutes of traffic safety and civilized driving education, including case studies of traffic accidents, followed by a swearing-in ceremony. Only then will the vehicle management office issue the driver's license. If it cannot be issued on the same day, it will be mailed to the driving school where the student is enrolled, and the school will notify the student to collect it, or it will be sent to the address provided by the student.
112
Share

Can C1 and D licenses remain unmerged?

C1 and D licenses cannot remain unmerged. The national motor vehicle driver's licenses are now interconnected, and each individual can only possess one driver's license. This means that if you hold a C1 license, you must merge the D license through an additional licensing process. One person cannot possess two separate motor vehicle driver's licenses, and those who already have two licenses must merge them. After merging, the different permitted vehicle types will be directly indicated on the driver's license. For example, if you hold a C1 license and also obtain a motorcycle D license, the merged license will become a C1D license. It's important to note that the merged license only has a total of 12 demerit points, meaning that demerit points from the D license will also affect the C1 license. When the demerit points reach or exceed 12 within a scoring cycle, you will need to undergo training and testing at the vehicle management office. When merging licenses, the two licenses may have different expiration dates. The validity period of the merged license will be calculated from the earlier date of license issuance. License renewal will also be based on this date. For instance, if the D license was obtained earlier, the validity period of the merged C1D license will be calculated from the D license's issuance date, even if the C1 license was only obtained two or three years ago.
101
Share

Can 95 and 98 gasoline be mixed?

92 gasoline and 95 gasoline cannot be mixed because they have different isooctane contents. 92 gasoline is suitable for engines with low compression ratios, while 95 gasoline is suitable for engines with high compression ratios. If 92 gasoline is added to a car that requires 95 gasoline, it may cause abnormal combustion, leading to knocking. Knocking not only damages the combustion chamber but also directly affects the normal operation of the engine, and in severe cases, it may cause engine damage. If 95 gasoline is added to a car that requires 92 gasoline, although it won’t damage the engine, 95 gasoline is more expensive than 92 gasoline, resulting in unnecessary costs. Differences between 92, 95, and 98 gasoline: Standard gasoline is composed of isooctane and n-heptane. Isooctane has good anti-knock properties, with an octane rating of 100, while n-heptane has poor anti-knock properties and is prone to knocking in gasoline engines, with an octane rating of 0. If the gasoline is labeled as 92, it means that the gasoline has the same anti-knock properties as standard gasoline containing 92% isooctane and 8% n-heptane. The same principle applies to 95 and 98 gasoline. How to handle adding the wrong gasoline: If gasoline with a higher octane rating than required is added (e.g., adding 95 gasoline when 92 is specified), simply consume it normally and then refill with 92 gasoline. If gasoline with a lower octane rating than required is added (e.g., adding 92 gasoline when 95 is specified), you can add a high anti-knock fuel additive. Alternatively, you can drain the fuel tank and refill with 95 gasoline. To determine the correct gasoline for your car, refer to the vehicle’s user manual or check the fuel grade marked on the fuel tank cap.
109
Share

How Long Can a Tire Last After Patch Repair?

After patch repair, a tire can continue to be used for two to three years. The specific types of tire repairs are introduced as follows: Mushroom Plug Repair: This method offers excellent repair results and is more durable, but the cost is relatively higher, and it takes longer. It is mainly suitable for larger punctures. Hot Patch Repair: The repair is very durable, but it requires precise control of heating temperature and time, which may damage the tire structure. The cost varies significantly depending on the tire size. Rubber Strip Repair: This method does not require tire disassembly or rebalancing, making it quick and convenient, with a relatively low cost. However, it requires enlarging the puncture, which may lead to air leakage over time. It is mainly suitable for small, clearly located punctures.
116
Share

Can a Warped Wheel Hub Be Used on the Rear Wheel?

It is recommended to replace a warped wheel hub, as using it on the rear wheel still poses certain safety risks. Additional Information: Subtle Cases: Warping of a wheel hub is often difficult to detect with the naked eye and requires professional inspection at a 4S shop using specialized equipment. However, even with a warped hub, the car may exhibit certain symptoms, such as varying degrees of vibration in the body and steering wheel, veering off course during movement, and increased fuel consumption. Obvious Cases: If the warping is visible to the naked eye, the tire's warping rate is already moderate or higher, significantly affecting the car's handling and stability. No wheel hub is perfectly round; as long as the dynamic balance value does not exceed 60, it can generally be restored to 0. However, repaired wheel hubs carry certain safety risks.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.