What is the solution for spark plugs contaminated with engine oil?
1 Answers
Spark plugs contaminated with engine oil need to be replaced with new ones. Steps for replacing spark plugs: Open the hood, remove the engine's plastic cover, detach the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage ignition wires in the correct firing order and reattach the cover. Methods to determine if a spark plug is damaged: Remove the spark plug and inspect its appearance. A normal spark plug's insulator skirt and electrodes should appear grayish-white, grayish-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug is covered in oil or deposits but is otherwise undamaged, it can be cleaned and reused. If the spark plug is severely damaged—showing signs of blistering, black streaks, cracks, or melted electrodes—identify the cause of the damage, fix the issue, and replace the spark plug. Additionally, if the spark plug appears blackened as if smoked, it indicates the wrong heat range was selected or the air-fuel mixture is too rich, causing oil to seep in.
