···
Log in / Register

What is the solution for abnormal noise when opening and closing car doors?

6Answers
Vivian
07/29/2025, 07:26:14 AM

Car door opening and closing abnormal noise solution is: add lubricating oil to the door hinge where the noise occurs. Since car doors are frequently opened and closed, and everyone operates with different force and range, the wear on door hinges is significant. Over time, this can lead to doors not closing tightly, resulting in abnormal noises. Before closing the car door, ensure the window glass is fully closed or fully open, as closing the door with the window partially open subjects it to greater vibration impact, potentially damaging both the window and the door. Secondly, when closing the door, gently pull the door open between 20 to 30 degrees, then apply slight force to close it. This method helps the door hinges last longer and ensures smooth door operation. There is a rubber sealing strip around the car door to prevent wind and rain from entering the cabin. Once the sealing strip ages and gets damaged, it can cause cabin water leakage and increase wind noise and other abnormal noises while driving.

Was this review help?
101
Share
JulianaAnn
08/13/2025, 02:57:21 PM

I noticed that my car door makes a creaking sound when opening and closing, which is quite annoying. The most common cause is lack of lubrication or rust on the door hinges, especially after rain or car washes when moisture seeps into the gaps, causing metal friction and noise. My solution is simple: buy a lubricant like WD-40 or silicone spray, apply it to the hinge joints, then open and close the door a few times to let it penetrate—the noise usually disappears immediately. If the sound persists, it might be due to dust buildup, so clean the area with a brush or cloth before reapplying the lubricant. For regular maintenance, I recommend checking these spots every three months to prevent long-term rust and wear. Some friends experience noise from aging door seals, which would require replacement, but most cases can be resolved with lubrication. Remember, avoid using engine oil-based products as they attract dust and make things worse. Although minor, addressing these noises promptly can save you from costly repairs later.

Was this review help?
14
Share
Expand All
JourneyDella
10/08/2025, 12:18:02 AM

As cars age, squeaky doors during opening and closing become a common occurrence. I've encountered this issue several times, often stemming from a few key points: first, door hinges may be rusted or loose, requiring tightening of screws and application of lubricant; second, aging and dried-out weatherstripping can cause friction noises when opening or closing—simply replacing them will do; third, wear and tear in the door lock mechanism might necessitate professional attention. When it comes to solutions, don't delay, as a door that doesn't close properly can compromise safety. Personally, I start with routine maintenance, such as using petroleum jelly to lubricate door gaps—it's cost-effective and works well. The issue becomes more noticeable with weather changes; doors contract tightly in cold winters, while weatherstripping expands in hot summers. Prevention involves regularly spraying silicone grease on door joints. If the problem persists, it's best to visit a repair shop for door alignment—a small expense that's worth it. Keeping door components clean is also crucial, as accumulated dust can easily lead to strange noises. A simple wipe-down can prevent issues before they arise.

Was this review help?
9
Share
Expand All
LilaFitz
11/21/2025, 12:37:29 AM

The constant squeaking when opening and closing the car door after prolonged use is really annoying. I believe the issue is mostly due to insufficient lubrication or rust. Try spraying some specialized lubricant on the hinges. Operate by opening and closing the door several times to evenly distribute the lubricant—if the noise reduces significantly, the problem is solved. For prevention, avoid prolonged exposure to rain and direct sunlight, and keeping the door dry can delay aging. If the noise persists after lubrication, it might be due to worn parts, requiring replacement or professional inspection. Paying attention to these details in daily use can save a lot of trouble.

Was this review help?
16
Share
Expand All
StAyla
01/11/2026, 02:13:39 AM

Door opening and closing noises may sound like a minor issue, but they could indicate hidden risks. I often find that squeaky doors are caused by rusty hinges or loose components. My suggestion is to try lubrication first: spray some WD-40, wait a few minutes, then test the door operation. If the noise persists, don't ignore it - visit a repair shop immediately to prevent potential accidents from improperly closing doors at high speeds. Environmental factors like excessive dust or humid weather can worsen the situation, so keeping your garage clean helps. I've seen cases where aging weatherstrips caused noises - those require replacement, which only costs a few dozen yuan. Remember: early detection and treatment are crucial for safety. Never attempt DIY disassembly to save trouble, as this might damage other components.

Was this review help?
9
Share
Expand All
KaiDella
04/07/2026, 11:33:09 PM

The annoying squeaky sound when opening and closing car doors can have various causes. A simple solution: spray silicone oil on the door hinges for lubrication - it's low-cost and works quickly. However, if the noise persists after spraying, it might be due to issues with the door lock mechanism or worn weatherstripping. For instance, aged weatherstripping needs replacement, otherwise excessive door-closing force can cause grinding noises. For prevention, regularly clean dust and rust spots in door gaps to avoid abnormal sounds. Additionally, usage environment plays a big role - areas with heavy rain or dust are more prone to such problems. Long-term neglect can affect the door's overall performance, so early intervention is key for peace of mind and safety. If DIY doesn't work, consult professionals - don't let it escalate into major issues.

Was this review help?
3
Share
Expand All
More Q&A

What is the reason for the occasional 'clunk' sound when starting an Audi A4?

The reasons for the occasional 'clunk' sound when starting an Audi A4 include: 1. Clutch noise; 2. Transmission shaft support bearing noise; 3. Drive axle abnormal noise; 4. Differential abnormal noise; 5. Tire abnormal noise; 6. Vehicle resonance due to loose parts. The Audi A4 is a B-segment model under FAW-Volkswagen, with body dimensions of 4761mm in length, 1826mm in width, 1439mm in height, and a wheelbase of 2869mm. In terms of appearance, the distinct waistline extending from the front to the rear of the Audi A4 enhances the overall sense of layering, while the prominent aerodynamic components at the front bottom and the sheet metal folds on the front and rear doors create a sporty character in its design.
118
Share

Should the Car Alternator Be Replaced if It Makes Abnormal Noises?

Car alternator abnormal noises need to be replaced. The abnormal noise from the car alternator may not necessarily come from the alternator itself; it could be caused by the belt or tensioner pulley. If the noise is from the belt or tensioner pulley, you can replace them with new ones. Only if the alternator is faulty and causing the noise should the alternator be replaced. The alternator is a crucial component in a car, responsible for supplying power to all electrical devices in the vehicle and charging the battery. If the alternator fails and cannot generate electricity, many systems in the car will not function properly, and the engine may also fail to operate correctly. The car engine requires the ignition system and fuel supply system to work, both of which depend on electricity.
101
Share

How to eliminate the airbag fault warning light?

To eliminate the airbag fault warning light, you need to visit a 4S dealership to have it cleared using an automotive fault diagnostic scanner. Attempting to resolve it yourself is not advisable. The automotive airbag system consists of airbag sensors, collision airbags, and electronic control devices. The driver-side collision airbag is installed in the steering wheel, while the passenger-side collision airbag is typically mounted on the dashboard. Airbag sensors are located on the left, right, and center sections of the cabin partition. As one of the primary safety features during accidents, it's essential to regularly check if the airbag system is functioning properly. If the airbag warning light remains illuminated for an extended period, promptly visit a 4S dealership or professional repair shop to service the airbag system, ensuring the vehicle's safety features operate correctly.
112
Share

How to Turn Off the Maintenance Reminder on Haval H6?

Haval H6 method to turn off the maintenance reminder: First, turn off the ignition switch, press and hold the trip meter reset button on the instrument cluster, then turn on the ignition switch. The odometer display will start counting down. When the display shows 0000.0, release the button. At this point, the wrench indicator light on the instrument cluster, which represents the maintenance operation, should turn off. The Haval H6 is the flagship model of the Haval brand, with body dimensions of 4640mm in length, 1825mm in width, and 1690mm in height, and a wheelbase of 2680mm. In terms of appearance, the Haval H6 features dynamic micro-curves outlining the side profile, LED intelligent headlights, and wrapped wheel arch design, exuding a cool and sporty vibe while pursuing technology and futurism, without compromising on elegance and stability.
113
Share

Where is the Cabin Air Filter Located in the Cruze?

The cabin air filter in the Cruze is located behind the glove compartment on the passenger side. The cabin air filter is a component installed in the vehicle's air conditioning system, designed to absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the air conditioning cooling system. Regular cleaning of the cabin air filter helps extend its service life. The Cruze is a model under Chevrolet, a brand of General Motors, with body dimensions of 4666mm in length, 1807mm in width, and 1460mm in height, and a wheelbase of 2700mm. In terms of exterior design, the Cruze features the brand's signature large-mouth grille, with angular headlights on the robust front end that appear very bold. The strongly defined lines on the hood, combined with the integrated bumper and slightly exaggerated design, give the Cruze a dynamic and youthful appearance.
115
Share

Is the Changan CS55 engine a Blue Whale?

Changan CS55 engine is not a Blue Whale. The Changan CS55 is equipped with a Blue Core engine. The CS55 series only offers a 1.5L turbocharged engine, with a maximum power of 115kw, capable of delivering a peak torque of 225nm between 2000 to 4000rpm. The transmission system is paired with a 6-speed manual gearbox and a 6-speed automatic transmission from Aisin. The Changan CS55 is an SUV model launched by Changan Automobile, with body dimensions of 4500mm in length, 1855mm in width, and 1690mm in height. In terms of exterior design, the Changan CS55 features an obsidian star grille, a leaping wave diving body, a three-dimensional obsidian rear, and LED 'cool' lights.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.