What is the solution for abnormal noise in the Haval H6 transmission?

How to Connect a Four-Wire Oxygen Sensor?

The four wires of the oxygen sensor are divided into two types: heater wires and signal wires. The heater wires refer to the power supply and ground wires of the heating coil, both of which are connected to the engine's computer, allowing the car's oxygen sensor to enter the working state more quickly. The other two signal wires are connected to the vehicle's power supply, playing a role in controlling the air-fuel ratio of the car, thereby improving the quality of fuel combustion in the car's engine. More details are as follows: 1. The oxygen sensor is installed in front of and behind the three-way catalytic converter. The oxygen sensor in front is called the front oxygen sensor, and the one behind is called the rear oxygen sensor. 2. The main function of the front oxygen sensor is to detect the oxygen content in the exhaust, and the ECU can adjust the air-fuel ratio based on the data transmitted by the front oxygen sensor. The main function of the rear oxygen sensor is to detect whether the three-way catalytic converter has failed.

17

3

Share

Can Small Trucks Enter Urban Areas?

Due to varying urban traffic restriction measures in different regions, small trucks are generally allowed to enter urban areas, but some road sections have restrictions, and others have time-based restrictions, which require attention. Typically, double-row small trucks are not permitted to enter downtown areas, and drivers may need to choose alternative routes. Relevant information about vehicle restrictions is as follows: 1. Regulations: The Ministry of Transport stipulates that, starting from September 21, double-row vehicle transporters are prohibited from entering highways; from July 1, 2018, non-compliant vehicle transporters are completely banned, and standard freight vehicle models are promoted. Highway toll stations may set up STW-18 portable over-limit detection equipment for random inspections. 2. Cancellation of the 15-year scrapping policy for pickup trucks: The cancellation of the 15-year scrapping policy for pickup trucks is only a new regulation in some regions. However, vehicles that fail annual inspections or reach 600,000 kilometers in mileage must still be scrapped. Currently, most regions still enforce the 15-year scrapping rule.

5

4

Share

Is the Compass a Joint Venture Vehicle?

The Compass is a joint venture vehicle. The Compass is an SUV model under its brand, which is an American automobile manufacturer. It has both domestically produced joint venture models and imported vehicles from abroad. The Jeep Compass retains some of the Jeep family characteristics: the front features a 7-slot grille and a design similar to the imported luxury SUV—the Grand Cherokee. This gives it a more urban and dynamic appearance, which is why the front face is considered the most attractive part of the Compass. The newly added 2013 Jeep(R) Compass Black Edition highlights smoked black elements in its overall design, emphasizing a cool black sports urban style. The smoked black headlights paired with the smoked black 7-slot grille inherit the classic design style of the Jeep(R) family. The smoked black 18-inch 10-spoke alloy wheels add a sense of power in the details, while the smoked black roof rails and rear bumper trim enhance practicality.

6

0

Share

How to Determine if a Wheel Bearing is Bad?

Methods to determine if a wheel bearing is bad: A faulty wheel bearing will produce a humming noise, which intensifies as the vehicle speed increases. You can accelerate the car to a certain speed and then let it coast in neutral. If the humming noise persists unchanged, it can be concluded that there is an issue with the wheel bearing. Additionally, a bad wheel bearing generates significant heat. After driving for a while, you can touch the wheel to feel its temperature—if the hub is noticeably hotter than normal, this indicates a problem. To extend the lifespan of wheel bearings, regular maintenance is essential. This includes cleaning dirt from the bearings, checking their operation, and replacing the grease. Traditional bearings typically consist of ball bearings or two sets of tapered roller bearings. With advancements in automotive technology, wheel bearing units have been developed, integrating two sets of bearings into a single unit, which are now widely used in vehicles.

8

3

Share

How Long Can You Drive After the Oil Maintenance Reminder?

Generally, maintenance should be performed within 1 week: Below is relevant information about the oil maintenance reminder: 1. Immediate Inspection: When the oil warning light comes on, the first thing you should do is open the engine compartment and check if the oil has been depleted. If this is indeed the case, you should promptly visit the nearest auto parts store to purchase oil and temporarily add it. 2. Other Issues: If the problem is not related to oil level, it could likely be due to a malfunction in the pressure relief valve or bypass valve. Of course, there is also a certain probability of oil pump aging (especially in older models), but these issues are difficult to diagnose and resolve. In such cases, you should try to drive at low RPM to the nearest repair shop for servicing. However, if you notice obvious shaking or lack of power during acceleration while driving, it is highly likely due to engine wear. In this situation, you must not continue driving and should immediately call for a tow truck.

17

0

Share

What are the reasons for a heavy BMW steering wheel?

BMW steering wheel heavy reasons are as follows: 1. Dirty power steering fluid: Power steering fluid is the force transmission medium. If the fluid is dirty, it will cause poor circulation, making steering difficult. In more severe cases, the power steering pump may produce a "buzzing" sound. 2. Low or leaking power steering fluid: Insufficient power steering fluid is equivalent to having no power assistance. Check the relevant systems for any signs of fluid leakage. Focus on inspecting the power steering fluid reservoir, power steering hoses, and steering gear. 3. Engine power steering belt too loose or too tight: Or the belt may be worn out. The tightness can be adjusted, but a worn belt must be replaced. 4. Overly tight or poorly lubricated steering system bearings: Issues such as overly tightened or insufficiently lubricated tie rod ends, bent steering shaft or sleeve causing jamming, etc. These are mechanical failures of the steering system.

16

4

Share

What is the solution for abnormal noise in the Haval H6 transmission?

How to Connect a Four-Wire Oxygen Sensor?

Can Small Trucks Enter Urban Areas?

Is the Compass a Joint Venture Vehicle?

How to Determine if a Wheel Bearing is Bad?

How Long Can You Drive After the Oil Maintenance Reminder?

What are the reasons for a heavy BMW steering wheel?

How Many Points Will Be Deducted for Driving Across Provinces with Temporary License Plates?

Is the Compass a Joint Venture or Domestic Vehicle?

How to Solve the Abnormal Noise of Car Generator Belt?

How to turn on the fog lights of a Polo car?