What is the solution for a vehicle stalling in waterlogged roads during heavy rain?

2 Answers
VanDavid
09/08/25 7:53am
In the event of a vehicle stalling in waterlogged roads during heavy rain, immediately exit the vehicle and move to higher ground. Below are precautions for driving in rainy conditions: Reduce speed and drive cautiously: Regardless of road width or condition, always slow down in the rain, maintain awareness of the distance to surrounding vehicles, and be prepared to take emergency measures. Visibility is reduced in rainy weather, and braking distances increase, so slowing down in advance allows more time and space to react, ensuring safety. Maintain a safe distance: Reduced visibility in the rain necessitates keeping a safe distance from other vehicles, especially large trucks. Large vehicles can obstruct your view, and water depths they can pass through may be unsafe for smaller cars. Additionally, trucks can create splashes that disrupt smaller vehicles. Use fog lights: Utilize fog lights to enhance driving safety in the rain. Turn on hazard lights if necessary to alert following vehicles to your presence. Do not restart a stalled engine: During heavy rain or storms, some roads can become severely waterlogged in a short time. If you must drive through water, do so at a steady speed in a low gear. If the vehicle stalls, do not attempt to restart it immediately, as this can cause severe engine damage. Instead, contact a professional repair service for an on-site inspection before restarting the vehicle.
Was this review help?
11
3
Share
Isaiah
09/20/25 6:20am
Driving through floodwaters on rainy days and stalling is really annoying. I've encountered it several times, mainly because water got into the engine. Rainwater rushed in through the air intake, and when the engine compressed the water, it seized and stopped. Never attempt to restart the engine, or the piston connecting rods may deform, causing the entire engine to be ruined. Quickly turn off the engine, turn on the hazard lights, ensure your safety and that of the car, then call for a tow truck to have it inspected. Prevention is key—avoid driving through water deeper than half the height of your wheel hubs, and go slowly to prevent waves from rushing in. During regular maintenance, check if the air filter is clean; replacing it can help prevent water absorption. On stormy days, it's best to stay home or take a detour. If you do stall, don’t panic—safety first. Be cautious about internal damage when repairing afterward, as it can be costly. This experience is painful, so take extra care.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

What are the four basic components of a braking system?

The braking system mainly consists of four parts: the energy supply device, control device, transmission device, and brake. The primary functions of the braking system are to decelerate or even stop a moving vehicle, maintain a stable speed for a vehicle going downhill, and keep a stationary vehicle from moving. It is a series of specialized devices designed to forcibly reduce the speed of a vehicle. The basic structure of a general braking system is as follows: 1. Wheel brake: mainly composed of the rotating part, fixed part, and adjustment mechanism. The rotating part is the brake drum; the fixed part includes the brake shoe and brake backing plate; the adjustment mechanism consists of an eccentric support pin and an adjustment cam used to adjust the shoe-drum clearance. 2. Hydraulic brake transmission mechanism: mainly composed of the brake pedal, push rod, master cylinder, wheel cylinder, and pipelines. 3. Pneumatic brake transmission mechanism: mainly composed of the brake pedal, push rod, brake master valve, air dryer, four-circuit protection valve, brake chamber, and pipelines.
8
5
Share

How to Replace the Battery in a Magotan Remote Control?

Method for replacing the battery in a Magotan remote control: 1. Press the small button on the side of the tail cap and pull out the key blade; 2. Push the chrome cap at the tail of the key sideways until you hear a click, then pull the cap upwards; 3. Use your thumb to pry open the side groove and separate the key case into two parts; 4. Remove the old battery and replace it with a new one; 5. Reassemble the key. Taking the 2020 Magotan as an example, its body dimensions are 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm, a fuel tank capacity of 66 liters, and a trunk capacity of 533 liters. This model is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
1
2
Share

Does the Honda Vezel have front and rear anti-collision beams?

Honda Vezel is equipped with front and rear anti-collision beams. The anti-collision beams are U-shaped channels made of cold-rolled steel plates, connected to the frame longitudinal beams, serving as important safety devices to absorb and mitigate external impacts and protect the front and rear parts of the vehicle body. The Honda Vezel is a compact 5-door, 5-seat SUV with body dimensions of 4328mm in length, 1772mm in width, and 1605mm in height, a wheelbase of 2610mm, and a fuel tank capacity of 50 liters. It is powered by a 1.5L naturally aspirated engine paired with a 6-speed manual transmission, delivering a maximum power of 96 kW and a maximum torque of 155 Nm. The drivetrain configuration is front-engine, front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension.
18
5
Share

Can you make a U-turn at a red light in a combined left-turn and U-turn lane?

You cannot make a U-turn at a red light in a combined left-turn and U-turn lane. On a combined left-turn and U-turn lane, making a U-turn is restricted by traffic signals. Vehicles must cross the intersection stop line and complete the U-turn when the left-turn signal is green; U-turns are not allowed when the left-turn signal is red. Below are additional details: 1. Article 49, Paragraph 1 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" stipulates that motor vehicles are not allowed to make a U-turn at locations with no U-turn or no left-turn signs or markings, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or sections prone to danger. 2. Paragraph 2 stipulates that motor vehicles may make a U-turn at locations without no U-turn or no left-turn signs or markings, but must not obstruct the normal passage of other vehicles and pedestrians.
6
1
Share

Does the Magotan's pressure bearing noise require replacement?

Magotan's pressure bearing noise requires replacement. Below are specific details about the Magotan: 1. Background: The Magotan originates from the Future B6, which is closely related to the Passat B6, and it is the first B-class sedan produced and sold by FAW-Volkswagen since its establishment. According to FAW-Volkswagen, "Ma" symbolizes confidence, decisiveness, and dynamism; "Teng" represents soaring, surpassing, and passion. Starting from the B6, the latest Volkswagen B-class cars began production at FAW-Volkswagen, forming the Magotan series. At the 2010 Paris Motor Show, the seventh-generation Volkswagen B-class car was officially unveiled. The B7 continued to be introduced to the domestic market by FAW-Volkswagen and was named the Magotan. To meet consumers' demand for comfort, the B7 was also natively lengthened, referred to by the media as the Magotan B7L, or the all-new Magotan. 2. Displacement: 1.4TSI, 1.8TSI, 2.0TSI, and 3.0V6.
11
4
Share

Why Do Black Cars Often Have Scratches?

Black cars often have scratches due to improper scrubbing during the car washing process, or because the polishing force is too heavy or scraping occurs during polishing. Below are specific introductions to car paint maintenance: 1. Waxing: Waxing can form a protective wax layer on the car's surface, isolating the paint from the external environment, thus protecting the paint and avoiding oxidation and fading. New cars do not need waxing within the first 3 months of purchase, and the frequency of waxing should not be excessive afterward, as frequent waxing can cause some damage to the paint. At most, waxing should be done once every two months. When waxing, apply force evenly and maintain a consistent waxing direction. 2. Crystal Coating: Crystal coating forms a strong fiber network on the car's paint surface, filling the invisible microscopic pores on the body's paint surface, achieving a mirror-like effect, and adding a thin diamond-hard shell to the paint. On the basis of the original coating, it further increases the hardness of the paint, protecting it from damage.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.