What is the solution for a small paint scratch on a car?

What are the differences between joint venture cars and domestic cars?

There are six main differences between joint venture cars and domestic cars: 1. Styling: In terms of exterior design, domestic cars are largely in the imitation stage, while joint venture cars may combine their own product advantages and make some improvements based on domestic consumer market demands, making them more market-friendly. 2. Engine technology: In some specialized automotive technologies, domestic car technology may have started development later, so joint venture brands may have an advantage in this area. Except for a few domestic brands with their own unique engine technologies, most domestic cars still rely on imported engine technologies. 3. Company attributes: Domestic cars are designed and manufactured by Chinese companies, while joint venture cars are mostly funded by Chinese partners who provide land, factory usage rights, and capital, while foreign investors contribute the brand and technology to jointly manufacture cars. 4. Features: Joint venture cars in the Chinese market often undergo some modifications, with basic performance features remaining unchanged, but some configurations may be reduced compared to the same models abroad. Domestic cars, due to their later start, may not match joint venture cars in terms of features. 5. After-sales maintenance: Domestic car brands focus on comfort, but due to their shorter development period compared to joint venture cars, their maintenance processes and systems are not as well-established as those of joint venture brands. 6. Brand influence: Joint venture cars typically rely on foreign automakers for technology and domestic automakers for labor. Therefore, compared to domestic cars, joint venture cars offer more technical reliability. The level of brand influence also affects the car's resale value.

12

2

Share

What Kind of Mercedes-Benz is Called 'Big Ben'?

Big Ben refers to the Mercedes-Benz S-Class, which is the most luxurious sedan in the Mercedes-Benz lineup. The S-Class is a large luxury sedan, and its competitors include the BMW 7 Series and Audi A8. The current Mercedes-Benz S-Class has 5 models available, equipped with two types of engines: a low-power 2.5-liter turbocharged engine and a high-power 3.0-liter turbocharged engine. The low-power 2.5-liter turbocharged engine delivers a maximum horsepower of 367 PS and a peak torque of 500 Nm. The engine's maximum torque is achieved between 2000 and 4000 rpm, while the maximum power output occurs between 5500 and 6000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 9-speed automatic transmission (9AT). The high-power 3.0-liter turbocharged engine produces 435 horsepower and a peak torque of 520 Nm. The engine's maximum torque is available between 1800 and 5800 rpm, while the maximum power output is achieved at 6100 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is also paired with a 9-speed automatic transmission (9AT). The Mercedes-Benz S-Class uses a double-wishbone independent suspension at both the front and rear. This setup significantly enhances the car's handling and ride comfort.

13

2

Share

What is SL5W30 engine oil?

Shell SL5W-30 is a multi-grade oil specification, and the specific parameters mean: 1. S: SAE viscosity grade standard; 2. L: API certification, where L represents automotive engine oil, with letters further in the alphabet indicating higher oil quality; 3. 0: Oil's low-temperature fluidity, where a smaller number indicates better low-temperature fluidity and a lower usable environmental temperature; 5W corresponds to an external temperature of -35 degrees Celsius; 4. W: Winter; 5. 30: Viscosity at high temperatures, where a higher number indicates greater oil viscosity and a higher usable environmental temperature. Additional information: 1. Viscosity specification: The grade following the oil classification indicates its viscosity specification. For example, in "15W-40, 5W-40," "W" stands for Winter, and the smaller the number before it, the better the oil's low-temperature fluidity, representing a lower usable environmental temperature and better engine protection during cold starts. For instance, 5W represents resistance to external temperatures as low as -30°C, while 20W is resistant to -15°C. 2. Kinematic viscosity: The number after W represents the oil's kinematic viscosity at 100°C, with higher numbers indicating higher viscosity. 40 means the kinematic viscosity standard at 100 degrees Celsius is between 12.5mm2/s and 16.3mm2/s, and it definitely does not mean it can be used below 40°C as some rumors suggest.

16

0

Share

How to Lift the Rear Seats of the Sylphy?

First, open both side doors. Then, pull upwards with force at the spots about two fists wide on each side of the rear seat. The latches will release, allowing the rear seats to be lifted easily. Here is an introduction to the Sylphy: 1. The Sylphy 1.6L model is equipped with an all-aluminum inline four-cylinder naturally aspirated engine (featuring DIS dual fuel injection technology and dual C-VTC continuous variable valve timing intelligent control system) and a CVT transmission, ensuring smoother gear shifts. It delivers a maximum power of 123 horsepower and a peak torque of 154 Nm. 2. The Sylphy 1.8L model continues to use the current engine, with unchanged power parameters: a maximum power of 139 horsepower (102 kW) at 6000 rpm and a peak torque of 174 Nm at 3600 rpm. 3. The top-end 1.6L model now includes an idle stop-start function, with corresponding enhancements to the starter and battery; the 1.8L model does not have this feature. 4. The CVT transmission has been recalibrated, expanding the gear ratio range from the previous 7.3:1 to 8.7:1, achieving the design goal of a compact CVT with a wide gear ratio.

6

1

Share

How to Replace the Coolant in a Skoda Rapid?

Here are the steps to replace the coolant in a Skoda Rapid: 1. Before replacement, ensure the engine is cooled down. Do not perform the replacement immediately after turning off the engine as the hot fluid can be dangerous. 2. Before replacing the coolant, place a bucket under the engine to catch the old coolant, then loosen the screw to drain it. 3. Tighten the screw, remove the screw from the coolant reservoir, and fill the reservoir with new coolant until it reaches the full mark. It's okay if it slightly exceeds the mark as some will be consumed over time. Generally, it is recommended to replace the coolant every 30,000 kilometers. Detailed replacement steps (for reference only): 1. Unscrew the radiator cap, open the radiator drain valve, and drain the coolant. 2. Insert a rubber hose connected to a tap into the radiator filler port, turn on the tap to allow tap water to continuously flow through the engine cooling system. During this flushing process, keep the engine idling and continue until clear water flows out of the radiator. 3. Turn off the tap, wait until all water in the cooling system is drained, then close the radiator drain valve. 4. Add coolant into the radiator filler port until the radiator is full. Unscrew the reservoir cap, add coolant up to the "Max" mark, being careful not to exceed it. 5. Replace and tighten the radiator cap and reservoir cap. Start the engine and let it idle for 2-3 minutes, then open the radiator cap. As some air is expelled from the cooling system, the coolant level will drop. Add more coolant until it reaches the "Max" mark again.

4

2

Share

Is White Car Interior Prone to Getting Dirty?

White car interior is prone to getting dirty. When the car interior becomes dirty, it can be replaced or cleaned. This is part of car maintenance. Overview: Car maintenance refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts related to the car, also known as car servicing. Currently, car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. Purpose: The purpose of car maintenance is to keep the car clean and in normal technical condition, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service life.

14

4

Share

What is the solution for a small paint scratch on a car?

What are the differences between joint venture cars and domestic cars?

What Kind of Mercedes-Benz is Called 'Big Ben'?

What is SL5W30 engine oil?

How to Lift the Rear Seats of the Sylphy?

How to Replace the Coolant in a Skoda Rapid?

Is White Car Interior Prone to Getting Dirty?

How many kilometers can the Accord Hybrid travel in pure electric mode?

What is the AE86?

Is it better to use 92 or 95 octane gasoline for the Honda Avancier?

Where is the tire pressure monitoring displayed on the 2021 Fit?