What is the small plug on the trunk lid of the Audi A4L?

1 Answers
LaMarcus
07/30/25 5:00am
The small plug on the trunk lid of the Audi A4L is a vibration-damping rubber pad. Function of the trunk: The trunk of a car, as the name suggests, is the area where spare items are stored and goods or belongings can be placed. Since compact cars come in two types—hatchback and sedan—the size of the trunk varies accordingly. Generally, the trunk contains the car's spare tire, an emergency kit, a toolkit, a warning triangle, a fire extinguisher, a car refrigerator, the emergency release cable for the fuel tank cap, and in some high-end models, the starting battery is also located in the trunk. Principles for arranging items in the trunk: Place large items at the bottom and small items on top; position heavy items toward the front and lighter items toward the back. This is because heavier objects have greater inertia, and in the event of sudden braking, unsecured heavy luggage in the back could cause negative effects, such as damaging other items or the luggage itself.
Was this review help?
17
2
Share
More Forum Discussions

What are the reasons for a vacuum diaphragm carburetor not accelerating properly?

The reasons for a carburetor not delivering fuel include dirty fuel, clogged fuel nozzles, blocked fuel filters, malfunctioning fuel pressure regulators, faulty throttle position sensors, insufficient cylinder pressure, etc. Introduction to Carburetors: A carburetor is a mechanical device that mixes a certain proportion of gasoline with air under the vacuum generated by the engine's operation. Its complete setup should include a starting device, idle device, medium load device, full load device, and acceleration device. Main Classifications of Carburetors: Carburetors are divided into simple carburetors and complex carburetors. They can also be categorized as downdraft and sidedraft types. Based on the throttle type, carburetors can be further classified as rotary and lift types.
15
5
Share

Unstable Idle After Starting the Car Followed by Automatic Engine Shutdown After a Few Seconds?

The reasons for unstable idle after starting the car followed by automatic engine shutdown after a few seconds include the following: Engine shutdown caused by excessive carbon deposits: Carbon deposits typically accumulate in areas such as the throttle valve, spark plugs, cylinders, fuel lines, and intake passages. These are a coking-like substance formed when fuel is exposed to high temperatures. General physical methods are ineffective in removing them, and specialized carbon cleaners are required for cleaning. Poor fuel quality and clogged fuel injectors: Using low-quality fuel not only leads to increased carbon deposits but can also clog fuel injectors, resulting in poor atomization. Additionally, low-quality fuel directly affects combustion efficiency, increasing fuel consumption. The carbon monoxide produced from incomplete combustion can accumulate inside the vehicle and may even lead to fatal poisoning.
10
1
Share

Why Does a New Car Accelerate Slowly During the Break-in Period?

Driving slowly during the break-in period of a new car is beneficial for the engine, as the mechanical components need time to wear in properly. Frequently revving the engine or accelerating aggressively during this period can cause damage. However, driving too slowly all the time can also lead to carbon buildup in the fuel injectors, which may reduce the engine's effective power. Key considerations during the break-in period of a new car include: Warm up the car before starting: Wait 5 to 10 seconds after shifting into second gear before driving; Avoid high-speed driving: New cars have speed limits during the break-in period—domestic cars should stay between 40 to 70 km/h, while imported cars should not exceed 100 km/h; Avoid overloading: Carrying excessive weight during the break-in period can damage mechanical components.
20
2
Share

Is it not allowed to honk the horn at all in no-honking zones?

In no-honking zones, you are not allowed to honk the horn at all, otherwise you will be fined. When you need to alert others, you can alternately use the high and low beams. This is commonly referred to as "flashing the lights," which is also a method encouraged by traffic police for everyone to use. Function of the horn: The horn is the audio signaling device of a car. During driving, the driver can emit necessary audio signals as needed and in accordance with regulations to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used to urge movement and convey signals. How the horn works: A car's electric horn produces sound through the vibration of a metal diaphragm. When the horn button is pressed, current flows through the contacts to the coil, generating a magnetic force that pulls down the armature, forcing the diaphragm to move. The movement of the armature causes the contacts to open, interrupting the current and making the coil's magnetic force disappear. The diaphragm, along with the armature, returns to its original position due to its own elasticity and the spring plate, closing the contacts again and reconnecting the circuit. Current then flows through the contacts to the coil, generating magnetic force and repeating the above process. This cycle repeats continuously, causing the diaphragm to vibrate and produce sound.
7
1
Share

Will the car move when the clutch is released?

Will the car move when the clutch is released? The principle of the car moving when the clutch is released is: the engine crankshaft drives the flywheel to rotate, the flywheel drives the friction plate to rotate, and the other end of the friction plate is connected to the gearbox. The clutch is the machine that separates the friction plate from the flywheel. When the driver releases the clutch, the pressure plate will press against the friction plate, and the flywheel will drive the friction plate to move, causing the car to move. Definition of clutch: The clutch is located in the flywheel housing between the engine and the gearbox. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the gearbox. Requirements for clutch: The clutch is a common component in mechanical transmission, which can separate or engage the transmission system at any time. Its basic requirements include: smooth engagement, quick and thorough separation; easy adjustment and repair; small external dimensions; light weight; good wear resistance and sufficient heat dissipation capacity; easy and labor-saving operation. Commonly used types are jaw type and friction type.
16
4
Share

Does Pressing the Clutch Harder Make the Car Go Faster?

Does pressing the clutch harder make the car go faster? The principle of action and reaction applies here. Before pressing the clutch, the gear output drives the wheels forward, providing both forward momentum and resistance because the wheels are connected to the gear. When the clutch is pressed, although the power is cut off, the resistance is also eliminated, leading to a temporary speed increase on relatively smooth roads. Three Key Techniques for Clutch Operation: Fast, Slow, and Engage. When releasing the clutch pedal, follow the principle of "fast, slow, and engage." When starting, press the clutch pedal swiftly and decisively, fully disengaging the clutch. Meaning of Fast, Slow, and Engage: This refers to the three stages of releasing the clutch pedal. Initially, lift it quickly. Once you feel the clutch pressure plate beginning to engage to the semi-engaged state, slow down the lifting speed. From semi-engagement to full engagement, gradually lift the clutch pedal.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.