What is the slalom distance for two-wheeled motorcycles?

2 Answers
MacBeckett
09/08/25 2:52am
The slalom distance for two-wheeled motorcycles is 2.3 meters, with a distance of 1.1 meters from the pole to the sideline. Pole spacing for slalom: For regular and light two-wheeled motorcycles, it is the vehicle length plus 50 centimeters; for standard three-wheeled motorcycles, it is the vehicle length plus 40 centimeters; for three-wheeled motorcycles, it is the vehicle length plus 80 centimeters; the termination line is three times the vehicle length from the last pole. Generally, the requirement is to weave through 5 poles in an S-shape with a spacing of 2.5 meters. The white lines on both sides are a little over 1 meter wide. Failing occurs if you cross the line, hit a pole, or stall. After completing the weave, you circle around and weave back. Slalom precautions: Both feet must not touch the ground; do not cross the road sideline; do not touch the poles during the slalom; try to avoid using the brakes during the test. If you are concerned about excessive speed, you can refrain from using the throttle and rely solely on idle speed by fully releasing the clutch to pass the test.
Was this review help?
15
3
Share
LucasDella
09/19/25 8:29am
I remember when I first started learning to ride a motorcycle, during the license test slalom, the cones were usually spaced about 2 meters apart. On my first attempt, I was extremely nervous, constantly worrying that such a narrow distance would easily knock over the poles, surely leading to a fail. But after more practice, I realized that 2 meters is the ideal spacing for beginners to practice low-speed control—any wider, say 3 meters, would be too easy and unchallenging; any closer, like 1.5 meters, would be too risky for beginners and prone to falls. Back then, I practiced half an hour daily at the training ground, starting slowly, learning to lean slightly when turning, keeping the clutch steady, and within weeks, I got the hang of it. I recommend fellow riders to set up cones in a safe place for practice—fixed spacing helps master balance better. Building confidence this way makes riding on the road steadier. Never rush for quick results at the risk of injuring yourself.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

How Many Years Before a Test Drive Vehicle is Scrapped?

Private cars do not have a clearly defined scrapping period. The regulations for scrapping private cars are as follows: For 5-seat family cars and 7-seat SUVs, as well as non-commercial small and micro vehicles, there is no usage lifespan limit. When the normal mileage reaches 600,000 kilometers, the state will guide the vehicle to be scrapped. Guided scrapping is a recommendation for scrapping, but if the vehicle still meets the requirements for continued use, it does not have to be scrapped. Mandatory scrapping means the vehicle must, without a doubt, be scrapped. There are four criteria for mandatory scrapping: Reaching the stipulated usage period; After repair and adjustment, the vehicle still does not meet the national standards for in-use vehicle safety technical requirements; After repair and adjustment or the adoption of control technology, the vehicle's emissions or noise still do not meet the national standards for in-use vehicle requirements; Failing to obtain the motor vehicle inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection validity period.
1
2
Share

Will Water Entering a Car Engine Affect It?

If water enters the engine, it will stall. Restarting the engine under such conditions can easily cause a hydro lock, leading to engine damage. After water enters the engine, check the electrical circuits: Since dirty rainwater is an excellent conductor, electrical circuits may short-circuit upon contact with water. After water enters the engine, check whether the braking system has been affected: The braking system has strong absorption capabilities, making it easy for rainwater to enter the brake fluid, which can impair braking performance and, in severe cases, cause the braking system to fail. Potential damages from water entering the engine: Once water enters a car engine, at best, the spark plugs may fail to ignite or the engine may stall directly. At worst, it can lead to cylinder scoring, hydro lock, connecting rod fractures, crankshaft bending, and more.
20
4
Share

What is the method to remove water stains from the inside of the windshield?

The water stains on the inside of the front windshield can be removed by using a soft cloth dipped in toothpaste to wipe it. Avoid using a wet towel. Here is some additional information: 1. Principle: The windshield of a car has a certain curvature and is made of laminated tempered glass and zoned tempered glass. Laminated glass enhances the glass's resistance to breakage, while zoned tempered glass increases the glass's strength. Even if the glass breaks, tempered glass shatters into small pieces, reducing the risk of injury to passengers. 2. Maintenance: For regular glass care, you can use glass cleaner to wipe the glass. Glass cleaners include summer glass cleaner, winter antifreeze glass cleaner, and special antifreeze glass cleaner. Choose the appropriate glass cleaner based on the season and weather conditions for effective glass cleaning.
18
5
Share

Why does the car seem stuck when starting?

It is likely due to excessive wear of the starter motor, resulting in poor contact caused by excessive clearance between the rotor or copper sleeve. Repairing such components is not cost-effective, and direct replacement is recommended. Here are the detailed causes of this fault: Various circuit faults: Insufficient battery power or loose connections of wires, dirty terminal posts leading to poor contact. Open circuit in the starter solenoid switch coil or poor contact of the contact disc. Erosion of the starter relay contacts, open circuit or burnout of the relay magnetic coil. Starter damage: Bent armature shaft inside the starter or overly tight bearings, dirty or eroded commutator, excessively worn brushes, weak springs unable to make contact, short circuit, open circuit, or grounding in the armature coil or field coil.
16
1
Share

Why is there a noise when shifting gears in a car?

Car shifting gear noise reasons are as follows: Transmission housing damage: Long-term wear and deformation of the transmission housing and bearing seat holes cause noise, which is loudest when shifting into low gears and gradually decreases when shifting into high gears, with direct gear being the quietest. Gear surface breakage: Impact during meshing caused by breakage of individual gear surfaces. When shifting into this gear, strong impact and vibration occur, leading to resonance in the transmission housing. Improper transmission assembly: Incorrect replacement of gears or needle bearings and bushings in a certain gear of the transmission; abnormal assembly clearance causing poor gear meshing and abnormal noise during transmission in that gear.
15
2
Share

Why Can't the Car Rearview Mirror Open?

It may be due to the temperature being too low or dust entering the extension mechanism, increasing resistance and preventing the rearview mirror from opening. You can try manually assisting to see if it resolves the issue. Here are the specific reasons: Rearview Mirror Switch Damage: First, check the fuse of the rearview mirror folding circuit. If the fuse is intact, it is highly likely that the rearview mirror switch is damaged. Gear Mechanism Damage: You can ask someone to assist by operating the rearview mirror switch from inside the car while you place your hand on the rearview mirror to feel if the motor inside is working. If you feel the motor's vibration but the rearview mirror doesn't move, it indicates that the opening and closing gear mechanism is damaged.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.